Weird USB errors on HD
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 4 lines · Karim Yaghmour
That being said, shouldn't there be a way for the kernel to refuse to use this hd if it's not getting enough power. I don't know enough about USB to say, but isn't there something more elegant that could be done in software?
Not really.. It seems like pretty much a matter of the controller saying
it can supply so much power, the drive says it uses so much power, but
one of them is lying and the drive ends up tripping the overcurrent.
Signature · 3 lines
Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [email protected] Home Page: http://www.roberthancock.com/
Quoted 9 lines · Robert Hancock
Quoted 4 lines · Karim Yaghmour
That being said, shouldn't there be a way for the kernel to refuse to use this hd if it's not getting enough power. I don't know enough about USB to say, but isn't there something more elegant that could be done in software?
Not really.. It seems like pretty much a matter of the controller saying
it can supply so much power, the drive says it uses so much power, but
one of them is lying and the drive ends up tripping the overcurrent.
The drive itself may shutdown until power cycled. I sorted this issue some months ago with a 2.5" 6GB drive in USB enclosure and the fix was hardware, adding bypass capacitors to supply peak HDD current. Software cannot fix that. No dataloss, just apparent lockup from OS point of view.
Drive fails to work on one laptop with a single USB port, but asking for 700mA from a 500mA USB port is too much, needs external 5V instead.
Grant.