Skip to contentSkip to conversation

How to fix "Invalid type for PCM iec958:"?

DISCUSSION Philip A. Prindeville 2 participants 5 messages Jul 30, 2005 – Aug 1, 2005 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

I've been seeing:

alsa-init: 1 soundcard found, using: iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02}
ALSA lib pcm.c:1851:(snd_pcm_open_conf) Invalid type for PCM iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02} definition (id: iec958, value: cards.pcm.iec958)
alsa-init: playback open error: Invalid argument

And went looking via Google if this is anything obvious. I saw several other postings about having the same issue, but no clear replies about what causes it, or how to fix it.

Should this be a FAQ question? BTW: What *is* the fix?

Thanks,

-Philip

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#1 lore raw

At Sat, 30 Jul 2005 13:53:38 -0600,

Quoted 11 lines · Philip A. Prindeville

I've been seeing:

alsa-init: 1 soundcard found, using: iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02}
ALSA lib pcm.c:1851:(snd_pcm_open_conf) Invalid type for PCM iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02} definition (id:
iec958, value: cards.pcm.iec958)
alsa-init: playback open error: Invalid argument

Quoted 5 lines

And went looking via Google if this is anything obvious. I saw several other postings about having the same issue, but no clear replies about what causes it, or how to fix it.

Should this be a FAQ question? BTW: What *is* the fix?

This depends on the hardware and driver you use.
Most likely, the SPDIF I/O is not supported or defined in the system configuration.

Takashi

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

At Mon, 01 Aug 2005 10:09:09 -0600,

Quoted 30 lines · Philip A. Prindeville
Quoted 27 lines · Takashi Iwai

At Sat, 30 Jul 2005 13:53:38 -0600,

Quoted 10 lines · Philip A. Prindeville

I've been seeing:

alsa-init: 1 soundcard found, using: iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02}
ALSA lib pcm.c:1851:(snd_pcm_open_conf) Invalid type for PCM iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02} definition (id:
iec958, value: cards.pcm.iec958)
alsa-init: playback open error: Invalid argument

Quoted 7 lines

And went looking via Google if this is anything obvious. I saw several other postings about having the same issue, but no clear replies about what causes it, or how to fix it.

Should this be a FAQ question? BTW: What *is* the fix?

This depends on the hardware and driver you use.
Most likely, the SPDIF I/O is not supported or defined in the system configuration.

Quoted 6 lines
Quoted 3 lines

Takashi

Ok, so what should the configuration look like? I thought it was already properly configured by default...

It's configured for devices/drivers known to work, but not all existing ones in the world.

Check your hardware and see alsa-lib/src/conf/cards/*.conf (installed to /usr/share/alsa/cards).

Takashi

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#4 lore raw
In reply to Takashi Iwai
Quoted 19 lines · Takashi Iwai

At Sat, 30 Jul 2005 13:53:38 -0600,

Quoted 7 lines · Philip A. Prindeville

I've been seeing:

alsa-init: 1 soundcard found, using: iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02}
ALSA lib pcm.c:1851:(snd_pcm_open_conf) Invalid type for PCM iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02} definition (id: iec958, value: cards.pcm.iec958)
alsa-init: playback open error: Invalid argument

Quoted 7 lines

And went looking via Google if this is anything obvious. I saw several other postings about having the same issue, but no clear replies about what causes it, or how to fix it.

Should this be a FAQ question? BTW: What *is* the fix?

Quoted 8 lines

This depends on the hardware and driver you use.
Most likely, the SPDIF I/O is not supported or defined in the system configuration.

Takashi

Ok, does anyone have a config file for a VIA8237? And how does the "private_string" get set and interpolated into:

               files [
                       {
                               @func concat
                               strings [
                                       { @func datadir }
                                       "/cards/"
                                       { @func private_string }
                                       ".conf"
                               ]
                       }
               ]

-Philip

-Philip

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#5 lore raw

At Mon, 01 Aug 2005 10:18:37 -0600,

Quoted 30 lines · Philip A. Prindeville
Quoted 27 lines · Takashi Iwai

At Sat, 30 Jul 2005 13:53:38 -0600,

Quoted 10 lines · Philip A. Prindeville

I've been seeing:

alsa-init: 1 soundcard found, using: iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02}
ALSA lib pcm.c:1851:(snd_pcm_open_conf) Invalid type for PCM iec958:{CARD 0 AES0 0x02 AES1 0x82 AES2 0x00 AES3 0x02} definition (id:
iec958, value: cards.pcm.iec958)
alsa-init: playback open error: Invalid argument

Quoted 7 lines

And went looking via Google if this is anything obvious. I saw several other postings about having the same issue, but no clear replies about what causes it, or how to fix it.

Should this be a FAQ question? BTW: What *is* the fix?

This depends on the hardware and driver you use.
Most likely, the SPDIF I/O is not supported or defined in the system configuration.

Quoted 5 lines
Quoted 3 lines

Takashi

Ok, does anyone have a config file for a VIA8237?

It's already in alsa-lib 1.0.9.

Takashi

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click