4/8 Move TLB flush definitions to the sub-architecture level

Index: linux-2.6.13/include/asm-i386/tlbflush.h
===================================================================
@@ -4,38 +4,7 @@
 #include <linux/config.h>
 #include <linux/mm.h>
 #include <asm/processor.h>
-
-#define __flush_tlb()							\
-	do {								\
-		unsigned int tmpreg;					\
-									\
-		__asm__ __volatile__(					\
-			"movl %%cr3, %0;              \n"		\
-			"movl %0, %%cr3;  # flush TLB \n"		\
-			: "=r" (tmpreg)					\
-			:: "memory");					\
-	} while (0)
-
-/*
- * Global pages have to be flushed a bit differently. Not a real
- * performance problem because this does not happen often.
- */
-#define __flush_tlb_global()						\
-	do {								\
-		unsigned int tmpreg, cr4, cr4_orig;			\
-									\
-		__asm__ __volatile__(					\
-			"movl %%cr4, %2;  # turn off PGE     \n"	\
-			"movl %2, %1;                        \n"	\
-			"andl %3, %1;                        \n"	\
-			"movl %1, %%cr4;                     \n"	\
-			"movl %%cr3, %0;                     \n"	\
-			"movl %0, %%cr3;  # flush TLB        \n"	\
-			"movl %2, %%cr4;  # turn PGE back on \n"	\
-			: "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig)	\
-			: "i" (~X86_CR4_PGE)				\
-			: "memory");					\
-	} while (0)
+#include <mach_tlbflush.h>
 
 extern unsigned long pgkern_mask;
 

@@ -49,9 +18,6 @@
 
 #define cpu_has_invlpg	(boot_cpu_data.x86 > 3)
 
-#define __flush_tlb_single(addr) \
-	__asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
-
 #ifdef CONFIG_X86_INVLPG
 # define __flush_tlb_one(addr) __flush_tlb_single(addr)
 #else

47 lines not on this page · raw message