Skip to contentSkip to conversation

Hotplug + firmware (newbie)

DISCUSSION Therry Fagundes 2 participants 2 messages Aug 7, 2005

lore
Share & tools
lore
#0 lore raw

Hi, Im trying to get a Hp 1000 (usb) to work with hotplug, let me see if I understood:

1. Create a file, into /etc/hotplug/usb called hp100fw.usermap (the device could be included into /etc/hotplug/usb.usermap, but in hotplug/usb/device.usermap is good pratice)

2. Insert into this file the fowlling lines (using pre-enumeration) :

# HP LaserJet 1000
hp1000fw 0x0003 0x03f0 0x0517 0x0000
0x0000 0x00 0x00 0x00
0x00 0x00 0x00 0x00000000

3. Create a file called hp1000fw (the name which I gave to the device) and put into this file the script (action) which needs to be done when it is connected :

#!/bin/sh
cat /lib/firmware/sihp1000.dl > /dev/usb/lp0

The firmware only will be uploaded if the device isnt "pre-enumerated".

Is that right ?
(I think that Im missing something)

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#1 lore raw
Quoted 31 lines · --- Therry Fagundes

Hi, Im trying to get a Hp 1000 (usb) to work with hotplug, let me see if
I understood:

1. Create a file, into /etc/hotplug/usb called hp100fw.usermap (the
device could be included into /etc/hotplug/usb.usermap, but in hotplug/usb/device.usermap is good pratice)

2. Insert into this file the fowlling lines (using pre-enumeration) :

# HP LaserJet 1000
hp1000fw 0x0003 0x03f0 0x0517
0x0000
0x0000 0x00 0x00 0x00

0x00 0x00 0x00
0x00000000

3. Create a file called hp1000fw (the name which I gave to the device)
and put into this file the script (action) which needs to be done when
it is connected :

#!/bin/sh
cat /lib/firmware/sihp1000.dl > /dev/usb/lp0

Quoted 9 lines

The firmware only will be uploaded if the device isnt "pre-enumerated".

Is that right ?
(I think that Im missing something)

Wow, we used Fedora Core 4 and didn't do anything of these. We use an HP LaserJet 1010 and here is what we do.

1. Plug the USB cable into PC.
2. Open the CUPS admin page (http://localhost:631) and follow the instructions from add printer wizard.

The printer works. However, sometimes after reboot, we have to unplug and plug the USB cable again.

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel