Implement use of HW assistance on TLB table walk on 8xx
Subsystems (2)
v6 cover Implement use of HW assistance on TLB table walk on 8xx
The purpose of this serie is to implement hardware assistance for TLB table walk on the 8xx.
First part prepares for using HW assistance in TLB routines:
- Reverts a former patch which broke SWAP on the 8xx
- move book3s64 page fragment code in a common part for reusing it by the 8xx as 16k page size mode still uses 4k page tables.
- switches to patch_site instead of patch_instruction, as it makes the code clearer and avoids pollution with global symbols.
- Optimise access to perf counters (hence reducing number of registers used)
Second part implements HW assistance in TLB routines in the following steps:
- Disable 16k page size mode and 512k hugepages
- Switch 4k to HW assistance
- Bring back 512k hugepages
- Bring back 16k page size mode.
Tested successfully on 8xx.
This serie applies after the two following series:
- [v2 00/24] ban the use of _PAGE_XXX flags outside platform specific code (https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=65376)
- [v2,1/4] powerpc/mm: enable the use of page table cache of order 0 (https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=60777)
Successfull compilation on kisskb (v5)
http://kisskb.ellerman.id.au/kisskb/head/555f5323c8d1459c9a452ae92c18048a4e29af94/
Successfull compilation on kisskb (v4)
http://kisskb.ellerman.id.au/kisskb/branch/chleroy/head/cfdf3349e3877df4cbfa9193ad1f4f4e4ada52de/
Successfull compilation on following defconfigs (v3):ppc64_defconfigppc64e_defconfig
Successfull compilation on following defconfigs (v2):ppc64_defconfigppc64e_defconfigpseries_defconfigpmac32_defconfiglinkstation_defconfigcorenet32_smp_defconfigppc40x_defconfigstorcenter_defconfigppc44x_defconfig
Changes in v6:
- Droped the part related to handling GUARD attribute at PGD/PMD level.
- Moved the commonalisation of page_fragment in the begining (this part has been reviewed by Aneesh)
- Rebased on today merge branch (19 Oct)
Changes in v5:
- Also avoid useless lock in get_pmd_from_cache()
- A new patch to relocate mmu headers in platform specific directories
- A new patch to distribute pgtable_t typedefs in platform specific mmu headers instead of the uggly #ifdef
- Moved early_pte_alloc_kernel() in platform specific pgalloc
- Restricted definition of PTE_FRAG_SIZE and PTE_FRAG_NR to platforms using the pte fragmentation.
- arch_exit_mmap() and destroy_pagetable_cache() are now platform specific.
Changes in v4:
- Reordered the serie to put at the end the modifications which makes L1 and L2 entries independant.
- No modifications to ppc64 ioremap (we still have an opportunity to merge them, for a future patch serie)
- 8xx code modified to use patch_site instead of patch_instruction
to get a clearer code and avoid object pollution with global symbols
- Moved perf counters in first 32kb of memory to optimise access
- Split the big bang to HW assistance in several steps:
1. Temporarily removes support of 16k pages and 512k hugepages
2. Change TLB routines to use HW assistance for 4k pages and 8M hugepages
3. Add back support for 512k hugepages
4. Add back support for 16k pages (using pte_fragment as page tables are still 4k)
Changes in v3:
- Fixed an issue in the 09/14 when CONFIG_PIN_TLB_TEXT was not enabled
- Added performance measurement in the 09/14 commit log
- Rebased on latest 'powerpc/merge' tree, which conflicted with 13/14
Changes in v2:
- Removed the 3 first patchs which have been applied already
- Fixed compilation errors reported by Michael
- Squashed the commonalisation of ioremap functions into a single patch
- Fixed the use of pte_fragment
- Added a patch optimising perf counting of TLB misses and instructions
Christophe Leroy (20):
Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for
CONFIG_SWAP"
powerpc/mm: Move pte_fragment_alloc() to a common location powerpc/mm: Avoid useless lock with single page fragments powerpc/mm: move platform specific mmu-xxx.h in platform directories powerpc/mm: Move pgtable_t into platform headers powerpc/code-patching: add a helper to get the address of a patch_site powerpc/8xx: Use patch_site for memory setup patching powerpc/8xx: Use patch_site for perf counters setup powerpc/8xx: Move SW perf counters in first 32kb of memory powerpc/8xx: Temporarily disable 16k pages and 512k hugepages powerpc/mm: Use hardware assistance in TLB handlers on the 8xx powerpc/mm: Enable 512k hugepage support with HW assistance on the 8xx powerpc/8xx: don't use r12/SPRN_SPRG_SCRATCH2 in TLB Miss handlers powerpc/8xx: regroup TLB handler routines
powerpc/mm: don't use pte_alloc_one_kernel() before slab is available powerpc/mm: inline pte_alloc_one() and pte_alloc_one_kernel() in PPC32 powerpc/book3s32: Remove CONFIG_BOOKE dependent code powerpc/mm: Extend pte_fragment functionality to nohash/32 powerpc/8xx: Remove PTE_ATOMIC_UPDATES
powerpc/mm: reintroduce 16K pages with HW assistance on 8xx
arch/powerpc/include/asm/book3s/32/mmu-hash.h | 2 +
arch/powerpc/include/asm/book3s/32/pgalloc.h | 43 ++-
arch/powerpc/include/asm/book3s/32/pgtable.h | 14 -
arch/powerpc/include/asm/book3s/64/mmu.h | 9 +
arch/powerpc/include/asm/book3s/64/pgalloc.h | 1 +
arch/powerpc/include/asm/code-patching.h | 5 +
arch/powerpc/include/asm/hugetlb.h | 4 +-
arch/powerpc/include/asm/mmu.h | 14 +-
arch/powerpc/include/asm/mmu_context.h | 2 +-
arch/powerpc/include/asm/{ => nohash/32}/mmu-40x.h | 1 +
arch/powerpc/include/asm/{ => nohash/32}/mmu-44x.h | 1 +
arch/powerpc/include/asm/{ => nohash/32}/mmu-8xx.h | 44 +--
arch/powerpc/include/asm/nohash/32/mmu.h | 25 ++
arch/powerpc/include/asm/nohash/32/pgalloc.h | 55 ++-
arch/powerpc/include/asm/nohash/32/pgtable.h | 29 +-
arch/powerpc/include/asm/nohash/32/pte-8xx.h | 3 -
arch/powerpc/include/asm/nohash/64/mmu.h | 12 +
arch/powerpc/include/asm/{ => nohash}/mmu-book3e.h | 1 +
arch/powerpc/include/asm/nohash/mmu.h | 11 +
arch/powerpc/include/asm/nohash/pgtable.h | 4 +
arch/powerpc/include/asm/page.h | 14 -
arch/powerpc/include/asm/pgtable-types.h | 4 +
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
arch/powerpc/kernel/head_8xx.S | 422 +++++++++------------
arch/powerpc/kvm/e500.h | 2 +-
arch/powerpc/mm/8xx_mmu.c | 29 +-
arch/powerpc/mm/Makefile | 7 +-
arch/powerpc/mm/hugetlbpage.c | 13 +
arch/powerpc/mm/mmu_context_book3s64.c | 15 -
arch/powerpc/mm/mmu_context_nohash.c | 14 +
arch/powerpc/mm/pgtable-book3s64.c | 88 +----
arch/powerpc/mm/pgtable-frag.c | 119 ++++++
arch/powerpc/mm/pgtable_32.c | 37 +-
arch/powerpc/perf/8xx-pmu.c | 27 +-
34 files changed, 552 insertions(+), 521 deletions(-)
rename arch/powerpc/include/asm/{ => nohash/32}/mmu-40x.h (99%)
rename arch/powerpc/include/asm/{ => nohash/32}/mmu-44x.h (99%)
rename arch/powerpc/include/asm/{ => nohash/32}/mmu-8xx.h (88%)
create mode 100644 arch/powerpc/include/asm/nohash/32/mmu.h
create mode 100644 arch/powerpc/include/asm/nohash/64/mmu.h
rename arch/powerpc/include/asm/{ => nohash}/mmu-book3e.h (99%)
create mode 100644 arch/powerpc/include/asm/nohash/mmu.h
create mode 100644 arch/powerpc/mm/pgtable-frag.cSignature · 1 line
2.13.3
PATCH v6 1/20 Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
This reverts commit 4f94b2c7462d9720b2afa7e8e8d4c19446bb31ce.
That commit was buggy, as it used rlwinm instead of rlwimi. Instead of fixing that bug, we revert the previous commit in order to reduce the dependency between L1 entries and L2 entries
--- arch/powerpc/include/asm/mmu-8xx.h | 34 +++++----------------------- arch/powerpc/kernel/head_8xx.S | 45 +++++++++++++++++++++++--------------- arch/powerpc/mm/8xx_mmu.c | 2 +- 3 files changed, 34 insertions(+), 47 deletions(-)
arch/powerpc/include/asm/mmu-8xx.h +6 -28
@@ -34,20 +34,12 @@* respectively NA for All or X for Supervisor and no access for User. * Then we use the APG to say whether accesses are according to Page rules or * "all Supervisor" rules (Access to all) -* We also use the 2nd APG bit for _PAGE_ACCESSED when having SWAP: -* When that bit is not set access is done iaw "all user" -* which means no access iaw page rules. -* Therefore, we define 4 APG groups. lsb is _PMD_USER, 2nd is _PAGE_ACCESSED -* 0x => No access => 11 (all accesses performed as user iaw page definition) -* 10 => No user => 01 (all accesses performed according to page definition) -* 11 => User => 00 (all accesses performed as supervisor iaw page definition) +* Therefore, we define 2 APG groups. lsb is _PMD_USER +* 0 => No user => 01 (all accesses performed according to page definition) +* 1 => User => 00 (all accesses performed as supervisor iaw page definition) * We define all 16 groups so that all other bits of APG can take any value */ -#ifdef CONFIG_SWAP -#define MI_APG_INIT 0xf4f4f4f4 -#else #define MI_APG_INIT 0x44444444 -#endif /* The effective page number register. When read, contains the information * about the last instruction TLB miss. When MI_RPN is written, bits in
@@ -115,20 +107,12 @@* Supervisor and no access for user and NA for ALL. * Then we use the APG to say whether accesses are according to Page rules or * "all Supervisor" rules (Access to all) -* We also use the 2nd APG bit for _PAGE_ACCESSED when having SWAP: -* When that bit is not set access is done iaw "all user" -* which means no access iaw page rules. -* Therefore, we define 4 APG groups. lsb is _PMD_USER, 2nd is _PAGE_ACCESSED -* 0x => No access => 11 (all accesses performed as user iaw page definition) -* 10 => No user => 01 (all accesses performed according to page definition) -* 11 => User => 00 (all accesses performed as supervisor iaw page definition) +* Therefore, we define 2 APG groups. lsb is _PMD_USER +* 0 => No user => 01 (all accesses performed according to page definition) +* 1 => User => 00 (all accesses performed as supervisor iaw page definition) * We define all 16 groups so that all other bits of APG can take any value */ -#ifdef CONFIG_SWAP -#define MD_APG_INIT 0xf4f4f4f4 -#else #define MD_APG_INIT 0x44444444 -#endif /* The effective page number register. When read, contains the information * about the last instruction TLB miss. When MD_RPN is written, bits in
@@ -180,12 +164,6 @@*/ #define SPRN_M_TW 799 -/* APGs */ -#define M_APG0 0x00000000 -#define M_APG1 0x00000020 -#define M_APG2 0x00000040 -#define M_APG3 0x00000060 -#ifdef CONFIG_PPC_MM_SLICES #include <asm/nohash/32/slice.h> #define SLICE_ARRAY_SIZE (1 << (32 - SLICE_LOW_SHIFT - 1))
arch/powerpc/kernel/head_8xx.S +27 -18
92 lines not on this page · raw message
arch/powerpc/mm/8xx_mmu.c +1 -1
@@ -79,7 +79,7 @@ void __init MMU_init_hw(void)for (; i <32 && mem >=LARGE_PAGE_SIZE_8M ; i++) {mtspr (SPRN_MD_CTR , ctr | (i <<8 ));mtspr (SPRN_MD_EPN , (unsigned long )__va (addr) |MD_EVALID ); -mtspr (SPRN_MD_TWC ,MD_PS8MEG |MD_SVALID |M_APG2 ); +mtspr (SPRN_MD_TWC ,MD_PS8MEG |MD_SVALID );mtspr (SPRN_MD_RPN , addr | flags | _PAGE_PRESENT); addr +=LARGE_PAGE_SIZE_8M ; mem -=LARGE_PAGE_SIZE_8M ;
Signature · 1 line
2.13.3
Michael Ellerman
AppliedRe: [v6, 01/20] Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
Quoted 9 lines · Christophe Leroy
This reverts commit
4f94b2c7462d9720b2afa7e8e8d4c19446bb31ce.That commit was buggy, as it used rlwinm instead of rlwimi. Instead of fixing that bug, we revert the previous commit in order to reduce the dependency between L1 entries and L2 entries
Fixes 4f94b2c7462d9 ("powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP")Signed-off-by Christophe Leroy <[email protected]>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/cc4ebf5c0a3440ed0a32d25c55ebdb
cheers
PATCH v6 2/20 powerpc/mm: Move pte_fragment_alloc() to a common location
In reply to Christophe LeroyIn preparation of next patch which generalises the use of pte_fragment_alloc() for all, this patch moves the related functions in a place that is common to all subarches.
The 8xx will need that for supporting 16k pages, as in that mode page tables still have a size of 4k.
Since pte_fragment with only once fragment is not different from what is done in the general case, we can easily migrate all subarchs to pte fragments.
--- arch/powerpc/include/asm/book3s/64/pgalloc.h | 1 + arch/powerpc/mm/Makefile | 4 +- arch/powerpc/mm/mmu_context_book3s64.c | 15 ---- arch/powerpc/mm/pgtable-book3s64.c | 85 -------------------- arch/powerpc/mm/pgtable-frag.c | 116 +++++++++++++++++++++++++++ 5 files changed, 120 insertions(+), 101 deletions(-) create mode 100644 arch/powerpc/mm/pgtable-frag.c
arch/powerpc/include/asm/book3s/64/pgalloc.h +1 -0
@@ -39,6 +39,7 @@ extern struct vmemmap_backing *vmemmap_list;extern struct kmem_cache *pgtable_cache[];#define PGT_CACHE (shift) pgtable_cache[shift] +void pte_frag_destroy (void *pte_frag);extern pte_t *pte_fragment_alloc (struct mm_struct *,unsigned long ,int );extern pmd_t *pmd_fragment_alloc (struct mm_struct *,unsigned long );extern void pte_fragment_free (unsigned long *,int );
arch/powerpc/mm/Makefile +3 -1
@@ -15,7 +15,9 @@ obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(BITS)e.o hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC_BOOK3E_64) += pgtable-book3e.o -obj-$(CONFIG_PPC_BOOK3S_64) += pgtable-hash64.o hash_utils_64.o slb.o $(hash64-y) mmu_context_book3s64.o pgtable-book3s64.o +obj-$(CONFIG_PPC_BOOK3S_64) += pgtable-hash64.o hash_utils_64.o slb.o \ + $(hash64-y) mmu_context_book3s64.o \ + pgtable-book3s64.o pgtable-frag.o obj-$(CONFIG_PPC_RADIX_MMU) += pgtable-radix.o tlb-radix.o obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o mmu_context_hash32.o obj-$(CONFIG_PPC_STD_MMU) += tlb_hash$(BITS).o
arch/powerpc/mm/mmu_context_book3s64.c +0 -15
@@ -164,21 +164,6 @@ static void destroy_contexts(mm_context_t *ctx) } } -static void pte_frag_destroy (void *pte_frag) -{ -int count; -struct page *page; - - page =virt_to_page (pte_frag); -/* drop all the pending references */ - count = ((unsigned long )pte_frag & ~PAGE_MASK ) >>PTE_FRAG_SIZE_SHIFT ; -/* We allow PTE_FRAG_NR fragments from a PTE page */ -if (atomic_sub_and_test (PTE_FRAG_NR - count, &page->pt_frag_refcount)) { -pgtable_page_dtor (page); -__free_page (page); - } -} -static void pmd_frag_destroy (void *pmd_frag) {int count;
arch/powerpc/mm/pgtable-book3s64.c +0 -85
91 lines not on this page · raw message
arch/powerpc/mm/pgtable-frag.c new file +116 -0
116 lines not on this page · raw message
Signature · 1 line
2.13.3
PATCH v6 3/20 powerpc/mm: Avoid useless lock with single page fragments
In reply to Christophe LeroyThere is no point in taking the page table lock as pte_frag or pmd_frag are always NULL when we have only one fragment.
--- arch/powerpc/mm/pgtable-book3s64.c | 3 +++ arch/powerpc/mm/pgtable-frag.c | 3 +++ 2 files changed, 6 insertions(+)
arch/powerpc/mm/pgtable-book3s64.c +3 -0
@@ -243,6 +243,9 @@ static pmd_t *get_pmd_from_cache(struct mm_struct *mm) {void *pmd_frag, *ret; +if (PMD_FRAG_NR ==1 ) +return NULL ; +spin_lock (&mm->page_table_lock); ret = mm->context.pmd_frag;if (ret) {
arch/powerpc/mm/pgtable-frag.c +3 -0
@@ -34,6 +34,9 @@ static pte_t *get_pte_from_cache(struct mm_struct *mm) {void *pte_frag, *ret; +if (PTE_FRAG_NR ==1 ) +return NULL ; +spin_lock (&mm->page_table_lock); ret = mm->context.pte_frag;if (ret) {
Signature · 1 line
2.13.3
PATCH v6 4/20 powerpc/mm: move platform specific mmu-xxx.h in platform directories
In reply to Christophe LeroyThe purpose of this patch is to move platform specific mmu-xxx.h files in platform directories like pte-xxx.h files.
In the meantime this patch creates common nohash and nohash/32 + nohash/64 mmu.h files for future common parts.
---
arch/powerpc/include/asm/mmu.h | 14 ++------------
arch/powerpc/include/asm/{ => nohash/32}/mmu-40x.h | 0
arch/powerpc/include/asm/{ => nohash/32}/mmu-44x.h | 0
arch/powerpc/include/asm/{ => nohash/32}/mmu-8xx.h | 0
arch/powerpc/include/asm/nohash/32/mmu.h | 19 +++++++++++++++++++
arch/powerpc/include/asm/nohash/64/mmu.h | 8 ++++++++
arch/powerpc/include/asm/{ => nohash}/mmu-book3e.h | 0
arch/powerpc/include/asm/nohash/mmu.h | 11 +++++++++++
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
arch/powerpc/kvm/e500.h | 2 +-
10 files changed, 42 insertions(+), 14 deletions(-)
rename arch/powerpc/include/asm/{ => nohash/32}/mmu-40x.h (100%)
rename arch/powerpc/include/asm/{ => nohash/32}/mmu-44x.h (100%)
rename arch/powerpc/include/asm/{ => nohash/32}/mmu-8xx.h (100%)
create mode 100644 arch/powerpc/include/asm/nohash/32/mmu.h
create mode 100644 arch/powerpc/include/asm/nohash/64/mmu.h
rename arch/powerpc/include/asm/{ => nohash}/mmu-book3e.h (100%)
create mode 100644 arch/powerpc/include/asm/nohash/mmu.harch/powerpc/include/asm/mmu.h +2 -12
@@ -341,18 +341,8 @@ static inline void mmu_early_init_devtree(void) { }#if defined(CONFIG_PPC_STD_MMU_32 )/* 32-bit classic hash table MMU */ #include <asm/book3s/32/mmu-hash.h> -#elif defined(CONFIG_40x) -/* 40x-style software loaded TLB */ -# include <asm/mmu-40x.h> -#elif defined(CONFIG_44x) -/* 44x-style software loaded TLB */ -# include <asm/mmu-44x.h> -#elif defined(CONFIG_PPC_BOOK3E_MMU ) -/* Freescale Book-E software loaded TLB or Book-3e (ISA 2.06+) MMU */ -# include <asm/mmu-book3e.h> -#elif defined (CONFIG_PPC_8xx) -/* Motorola/Freescale 8xx software loaded TLB */ -# include <asm/mmu-8xx.h> +#elif defined(CONFIG_PPC_MMU_NOHASH ) +#include <asm/nohash/mmu.h> #endif #endif /* __KERNEL__ */
arch/powerpc/include/asm/nohash/32/mmu-40x.h renamed from arch/powerpc/include/asm/mmu-40x.h +0 -0
arch/powerpc/include/asm/nohash/32/mmu-44x.h renamed from arch/powerpc/include/asm/mmu-44x.h +0 -0
arch/powerpc/include/asm/nohash/32/mmu-8xx.h renamed from arch/powerpc/include/asm/mmu-8xx.h +0 -0
arch/powerpc/include/asm/nohash/32/mmu.h new file +19 -0
@@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_32_MMU_H_ +#define _ASM_POWERPC_NOHASH_32_MMU_H_ + +#if defined(CONFIG_40x) +/* 40x-style software loaded TLB */ +#include <asm/nohash/32/mmu-40x.h> +#elif defined(CONFIG_44x) +/* 44x-style software loaded TLB */ +#include <asm/nohash/32/mmu-44x.h> +#elif defined(CONFIG_PPC_BOOK3E_MMU ) +/* Freescale Book-E software loaded TLB or Book-3e (ISA 2.06+) MMU */ +#include <asm/nohash/mmu-book3e.h> +#elif defined (CONFIG_PPC_8xx) +/* Motorola/Freescale 8xx software loaded TLB */ +#include <asm/nohash/32/mmu-8xx.h> +#endif + +#endif /* _ASM_POWERPC_NOHASH_32_MMU_H_ */
arch/powerpc/include/asm/nohash/64/mmu.h new file +8 -0
@@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_64_MMU_H_ +#define _ASM_POWERPC_NOHASH_64_MMU_H_ + +/* Freescale Book-E software loaded TLB or Book-3e (ISA 2.06+) MMU */ +#include <asm/nohash/mmu-book3e.h> + +#endif /* _ASM_POWERPC_NOHASH_64_MMU_H_ */
arch/powerpc/include/asm/nohash/mmu-book3e.h renamed from arch/powerpc/include/asm/mmu-book3e.h +0 -0
arch/powerpc/include/asm/nohash/mmu.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_MMU_H_ +#define _ASM_POWERPC_NOHASH_MMU_H_ + +#ifdef CONFIG_PPC64 +#include <asm/nohash/64/mmu.h> +#else +#include <asm/nohash/32/mmu.h> +#endif + +#endif /* _ASM_POWERPC_NOHASH_MMU_H_ */
arch/powerpc/kernel/cpu_setup_fsl_booke.S +1 -1
@@ -17,7 +17,7 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/ppc_asm.h> -#include <asm/mmu-book3e.h> +#include <asm/nohash/mmu-book3e.h> #include <asm/asm-offsets.h> #include <asm/mpc85xx.h>
arch/powerpc/kvm/e500.h +1 -1
@@ -20,7 +20,7 @@#define KVM_E500_H #include <linux/kvm_host.h> -#include <asm/mmu-book3e.h> +#include <asm/nohash/mmu-book3e.h> #include <asm/tlb.h> #include <asm/cputhreads.h>
Signature · 1 line
2.13.3
PATCH v6 5/20 powerpc/mm: Move pgtable_t into platform headers
In reply to Christophe LeroyThis patch move pgtable_t into platform headers.
It gets rid of the CONFIG_PPC_64K_PAGES case for PPC64 as nohash/64 doesn't support CONFIG_PPC_64K_PAGES.
--- arch/powerpc/include/asm/book3s/32/mmu-hash.h | 2 ++ arch/powerpc/include/asm/book3s/64/mmu.h | 9 +++++++++ arch/powerpc/include/asm/nohash/32/mmu.h | 4 ++++ arch/powerpc/include/asm/nohash/64/mmu.h | 4 ++++ arch/powerpc/include/asm/page.h | 14 -------------- 5 files changed, 19 insertions(+), 14 deletions(-)
arch/powerpc/include/asm/book3s/32/mmu-hash.h +2 -0
@@ -42,6 +42,8 @@ struct ppc_bat {u32 batu; u32 batl; }; + +typedef struct page *pgtable_t ;#endif /* !__ASSEMBLY__ */ /*
arch/powerpc/include/asm/book3s/64/mmu.h +9 -0
@@ -2,6 +2,8 @@#ifndef _ASM_POWERPC_BOOK3S_64_MMU_H_#define _ASM_POWERPC_BOOK3S_64_MMU_H_ +#include <asm/page.h> +#ifndef __ASSEMBLY__/* * Page size definition
@@ -24,6 +26,13 @@ struct mmu_psize_def { };extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT ]; +/* +* For BOOK3s 64 with 4k and 64K linux page size +* we want to use pointers, because the page table +* actually store pfn +*/ +typedef pte_t *pgtable_t ; +#endif /* __ASSEMBLY__ */ /* 64-bit classic hash table MMU */
arch/powerpc/include/asm/nohash/32/mmu.h +4 -0
@@ -16,4 +16,8 @@#include <asm/nohash/32/mmu-8xx.h> #endif +#ifndef __ASSEMBLY__ +typedef struct page *pgtable_t ; +#endif +#endif /* _ASM_POWERPC_NOHASH_32_MMU_H_ */
arch/powerpc/include/asm/nohash/64/mmu.h +4 -0
@@ -5,4 +5,8 @@/* Freescale Book-E software loaded TLB or Book-3e (ISA 2.06+) MMU */ #include <asm/nohash/mmu-book3e.h> +#ifndef __ASSEMBLY__ +typedef struct page *pgtable_t ; +#endif +#endif /* _ASM_POWERPC_NOHASH_64_MMU_H_ */
arch/powerpc/include/asm/page.h +0 -14
@@ -335,20 +335,6 @@ void arch_free_page(struct page *page, int order);#endif struct vm_area_struct ; -#ifdef CONFIG_PPC_BOOK3S_64 -/* -* For BOOK3s 64 with 4k and 64K linux page size -* we want to use pointers, because the page table -* actually store pfn -*/ -typedef pte_t *pgtable_t ; -#else -#if defined(CONFIG_PPC_64K_PAGES ) && defined(CONFIG_PPC64 ) -typedef pte_t *pgtable_t ; -#else -typedef struct page *pgtable_t ; -#endif -#endif #include <asm-generic/memory_model.h> #endif /* __ASSEMBLY__ */
Signature · 1 line
2.13.3
PATCH v6 6/20 powerpc/code-patching: add a helper to get the address of a patch_site
In reply to Christophe LeroyThis patch adds a helper to get the address of a patch_site
--- arch/powerpc/include/asm/code-patching.h | 5 +++++ 1 file changed, 5 insertions(+)
arch/powerpc/include/asm/code-patching.h +5 -0
@@ -36,6 +36,11 @@ int raw_patch_instruction(unsigned int *addr, unsigned int instr);int patch_instruction_site (s32 *addr,unsigned int instr);int patch_branch_site (s32 *site,unsigned long target,int flags); +static inline unsigned long site_addr (s32 *site) +{ +return (unsigned long )site + *site; +} +int instr_is_relative_branch (unsigned int instr);int instr_is_relative_link_branch (unsigned int instr);int instr_is_branch_to_addr (const unsigned int *instr,unsigned long addr);
Signature · 1 line
2.13.3
Michael Ellerman
AppliedRe: [v6, 06/20] powerpc/code-patching: add a helper to get the address of a patch_site
Quoted 3 lines · Christophe Leroy
This patch adds a helper to get the address of a
patch_siteSigned-off-by Christophe Leroy <[email protected]>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/082e2869fc022de4db9977e06558da
cheers
PATCH v6 7/20 powerpc/8xx: Use patch_site for memory setup patching
In reply to Christophe LeroyThe 8xx TLB miss routines are patched at startup at several places.
This patch uses the new patch_site functionality in order to get a better code readability and avoid a label mess when dumping the code with 'objdump -d'
--- arch/powerpc/include/asm/nohash/32/mmu-8xx.h | 5 +++++ arch/powerpc/kernel/head_8xx.S | 19 +++++++++++-------- arch/powerpc/mm/8xx_mmu.c | 23 +++++++---------------- 3 files changed, 23 insertions(+), 24 deletions(-)
arch/powerpc/include/asm/nohash/32/mmu-8xx.h +5 -0
@@ -229,6 +229,11 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) BUG(); } +/* patch sites */ +extern s32 patch__itlbmiss_linmem_top; +extern s32 patch__dtlbmiss_linmem_top, patch__dtlbmiss_immr_jmp; +extern s32 patch__fixupdar_linmem_top; +#endif /* !__ASSEMBLY__ */ #if defined(CONFIG_PPC_4K_PAGES )
arch/powerpc/kernel/head_8xx.S +11 -8
@@ -31,6 +31,7 @@ #include <asm/asm-offsets.h> #include <asm/ptrace.h> #include <asm/export.h> +#include <asm/code-patching-asm.h> #if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000 /* By simply checking Address >= 0x80000000, we know if its a kernel address */
@@ -318,8 +319,8 @@ InstructionTLBMiss: cmpli cr0, r11, PAGE_OFFSET@h #ifndef CONFIG_PIN_TLB_TEXT /* It is assumed that kernel code fits into the first 8M page */ -_ENTRY(ITLBMiss_cmp) - cmpli cr7, r11, (PAGE_OFFSET + 0x0800000)@h +0: cmpli cr7, r11, (PAGE_OFFSET + 0x0800000)@h + patch_site 0b, patch__itlbmiss_linmem_top #endif #endif #endif
@@ -436,11 +437,11 @@ DataStoreTLBMiss: #ifndef CONFIG_PIN_TLB_IMMR cmpli cr0, r11, VIRT_IMMR_BASE@h #endif -_ENTRY(DTLBMiss_cmp) - cmpli cr7, r11, (PAGE_OFFSET + 0x1800000)@h +0: cmpli cr7, r11, (PAGE_OFFSET + 0x1800000)@h + patch_site 0b, patch__dtlbmiss_linmem_top #ifndef CONFIG_PIN_TLB_IMMR -_ENTRY(DTLBMiss_jmp) - beq- DTLBMissIMMR +0: beq- DTLBMissIMMR + patch_site 0b, patch__dtlbmiss_immr_jmp #endif blt cr7, DTLBMissLinear lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
@@ -714,8 +715,10 @@ FixupDAR:/* Entry point for dcbx workaround. */ mfspr r11, SPRN_M_TW /* Get level 1 table */ blt+ 3f rlwinm r11, r10, 16, 0xfff8 -_ENTRY(FixupDAR_cmp) - cmpli cr7, r11, (PAGE_OFFSET + 0x1800000)@h + +0: cmpli cr7, r11, (PAGE_OFFSET + 0x1800000)@h + patch_site 0b, patch__fixupdar_linmem_top + /* create physical page address from effective address */ tophys(r11, r10) blt- cr7, 201f
arch/powerpc/mm/8xx_mmu.c +7 -16
@@ -97,22 +97,13 @@ static void __init mmu_mapin_immr(void)map_kernel_page (v + offset, p + offset,PAGE_KERNEL_NCG ); } -/* Address of instructions to patch */ -#ifndef CONFIG_PIN_TLB_IMMR -extern unsigned int DTLBMiss_jmp; -#endif -extern unsigned int DTLBMiss_cmp, FixupDAR_cmp; -#ifndef CONFIG_PIN_TLB_TEXT -extern unsigned int ITLBMiss_cmp; -#endif - -static void __init mmu_patch_cmp_limit (unsigned int *addr,unsigned long mapped) +static void __init mmu_patch_cmp_limit (s32 *site,unsigned long mapped) { -unsigned int instr = *addr; +unsigned int instr = *(unsigned int *)site_addr (site); instr &=0xffff0000 ; instr |= (unsigned long )__va (mapped) >>16 ; -patch_instruction (addr, instr); +patch_instruction_site (site, instr); }unsigned long __init mmu_mapin_ram (unsigned long top)
@@ -123,17 +114,17 @@ unsigned long __init mmu_mapin_ram(unsigned long top) mapped =0 ;mmu_mapin_immr ();#ifndef CONFIG_PIN_TLB_IMMR -patch_instruction (&DTLBMiss_jmp,PPC_INST_NOP ); +patch_instruction_site (&patch__dtlbmiss_immr_jmp,PPC_INST_NOP );#endif #ifndef CONFIG_PIN_TLB_TEXT -mmu_patch_cmp_limit (&ITLBMiss_cmp,0 ); +mmu_patch_cmp_limit (&patch__itlbmiss_linmem_top,0 );#endif }else { mapped = top & ~(LARGE_PAGE_SIZE_8M -1 ); } -mmu_patch_cmp_limit (&DTLBMiss_cmp, mapped); -mmu_patch_cmp_limit (&FixupDAR_cmp, mapped); +mmu_patch_cmp_limit (&patch__dtlbmiss_linmem_top, mapped); +mmu_patch_cmp_limit (&patch__fixupdar_linmem_top, mapped);/* If the size of RAM is not an exact power of two, we may not * have covered RAM in its entirety with 8 MiB
Signature · 1 line
2.13.3
Michael Ellerman
AppliedRe: [v6,07/20] powerpc/8xx: Use patch_site for memory setup patching
Quoted 7 lines · Christophe Leroy
The 8xx TLB miss routines are patched at startup at several places.
This patch uses the new
patch_sitefunctionality in order to get a better code readability and avoid a label mess when dumping the code with 'objdump -d'Signed-off-by Christophe Leroy <[email protected]>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/1a210878bf21de3f60646c13001d04
cheers
PATCH v6 8/20 powerpc/8xx: Use patch_site for perf counters setup
In reply to Christophe LeroyThe 8xx TLB miss routines are patched when (de)activating perf counters.
This patch uses the new patch_site functionality in order to get a better code readability and avoid a label mess when dumping the code with 'objdump -d'
--- arch/powerpc/include/asm/nohash/32/mmu-8xx.h | 4 ++++ arch/powerpc/kernel/head_8xx.S | 33 ++++++++++++++++------------ arch/powerpc/perf/8xx-pmu.c | 27 ++++++++++------------- 3 files changed, 35 insertions(+), 29 deletions(-)
arch/powerpc/include/asm/nohash/32/mmu-8xx.h +4 -0
@@ -234,6 +234,10 @@ extern s32 patch__itlbmiss_linmem_top;extern s32 patch__dtlbmiss_linmem_top, patch__dtlbmiss_immr_jmp;extern s32 patch__fixupdar_linmem_top; +extern s32 patch__itlbmiss_exit_1, patch__itlbmiss_exit_2; +extern s32 patch__dtlbmiss_exit_1, patch__dtlbmiss_exit_2, patch__dtlbmiss_exit_3; +extern s32 patch__itlbmiss_perf, patch__dtlbmiss_perf; +#endif /* !__ASSEMBLY__ */ #if defined(CONFIG_PPC_4K_PAGES )
arch/powerpc/kernel/head_8xx.S +19 -14
@@ -374,16 +374,17 @@ InstructionTLBMiss: mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ /* Restore registers */ -_ENTRY(itlb_miss_exit_1) - mfspr r10, SPRN_SPRG_SCRATCH0 +0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 #if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE) mfspr r12, SPRN_SPRG_SCRATCH2 #endif rfi + patch_site 0b, patch__itlbmiss_exit_1 + #ifdef CONFIG_PERF_EVENTS -_ENTRY(itlb_miss_perf) - lis r10, (itlb_miss_counter - PAGE_OFFSET)@ha + patch_site 0f, patch__itlbmiss_perf +0: lis r10, (itlb_miss_counter - PAGE_OFFSET)@ha lwz r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10) addi r11, r11, 1 stw r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10)
@@ -499,14 +500,16 @@ DataStoreTLBMiss: /* Restore registers */ mtspr SPRN_DAR, r11 /* Tag DAR */ -_ENTRY(dtlb_miss_exit_1) - mfspr r10, SPRN_SPRG_SCRATCH0 + +0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 mfspr r12, SPRN_SPRG_SCRATCH2 rfi + patch_site 0b, patch__dtlbmiss_exit_1 + #ifdef CONFIG_PERF_EVENTS -_ENTRY(dtlb_miss_perf) - lis r10, (dtlb_miss_counter - PAGE_OFFSET)@ha + patch_site 0f, patch__dtlbmiss_perf +0: lis r10, (dtlb_miss_counter - PAGE_OFFSET)@ha lwz r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10) addi r11, r11, 1 stw r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10)
@@ -658,11 +661,12 @@ DTLBMissIMMR: li r11, RPN_PATTERN mtspr SPRN_DAR, r11 /* Tag DAR */ -_ENTRY(dtlb_miss_exit_2) - mfspr r10, SPRN_SPRG_SCRATCH0 + +0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 mfspr r12, SPRN_SPRG_SCRATCH2 rfi + patch_site 0b, patch__dtlbmiss_exit_2 DTLBMissLinear: mtcr r12
@@ -676,11 +680,12 @@ DTLBMissLinear: li r11, RPN_PATTERN mtspr SPRN_DAR, r11 /* Tag DAR */ -_ENTRY(dtlb_miss_exit_3) - mfspr r10, SPRN_SPRG_SCRATCH0 + +0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 mfspr r12, SPRN_SPRG_SCRATCH2 rfi + patch_site 0b, patch__dtlbmiss_exit_3 #ifndef CONFIG_PIN_TLB_TEXT ITLBMissLinear:
@@ -693,11 +698,11 @@ ITLBMissLinear: _PAGE_PRESENT mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ -_ENTRY(itlb_miss_exit_2) - mfspr r10, SPRN_SPRG_SCRATCH0 +0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 mfspr r12, SPRN_SPRG_SCRATCH2 rfi + patch_site 0b, patch__itlbmiss_exit_2 #endif /* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions
arch/powerpc/perf/8xx-pmu.c +12 -15
@@ -31,9 +31,6 @@extern unsigned long itlb_miss_counter, dtlb_miss_counter;extern atomic_t instruction_counter; -extern unsigned int itlb_miss_perf, dtlb_miss_perf; -extern unsigned int itlb_miss_exit_1, itlb_miss_exit_2; -extern unsigned int dtlb_miss_exit_1, dtlb_miss_exit_2, dtlb_miss_exit_3;static atomic_t insn_ctr_ref;static atomic_t itlb_miss_ref;
@@ -103,22 +100,22 @@ static int mpc8xx_pmu_add(struct perf_event *event, int flags)break ;case PERF_8xx_ID_ITLB_LOAD_MISS:if (atomic_inc_return (&itlb_miss_ref) ==1 ) { -unsigned long target = (unsigned long )&itlb_miss_perf; +unsigned long target =site_addr (&patch__itlbmiss_perf); -patch_branch (&itlb_miss_exit_1, target,0 ); +patch_branch_site (&patch__itlbmiss_exit_1, target,0 );#ifndef CONFIG_PIN_TLB_TEXT -patch_branch (&itlb_miss_exit_2, target,0 ); +patch_branch_site (&patch__itlbmiss_exit_2, target,0 );#endif } val = itlb_miss_counter;break ;case PERF_8xx_ID_DTLB_LOAD_MISS:if (atomic_inc_return (&dtlb_miss_ref) ==1 ) { -unsigned long target = (unsigned long )&dtlb_miss_perf; +unsigned long target =site_addr (&patch__dtlbmiss_perf); -patch_branch (&dtlb_miss_exit_1, target,0 ); -patch_branch (&dtlb_miss_exit_2, target,0 ); -patch_branch (&dtlb_miss_exit_3, target,0 ); +patch_branch_site (&patch__dtlbmiss_exit_1, target,0 ); +patch_branch_site (&patch__dtlbmiss_exit_2, target,0 ); +patch_branch_site (&patch__dtlbmiss_exit_3, target,0 ); } val = dtlb_miss_counter;break ;
@@ -180,17 +177,17 @@ static void mpc8xx_pmu_del(struct perf_event *event, int flags)break ;case PERF_8xx_ID_ITLB_LOAD_MISS:if (atomic_dec_return (&itlb_miss_ref) ==0 ) { -patch_instruction (&itlb_miss_exit_1, insn); +patch_instruction_site (&patch__itlbmiss_exit_1, insn);#ifndef CONFIG_PIN_TLB_TEXT -patch_instruction (&itlb_miss_exit_2, insn); +patch_instruction_site (&patch__itlbmiss_exit_2, insn);#endif }break ;case PERF_8xx_ID_DTLB_LOAD_MISS:if (atomic_dec_return (&dtlb_miss_ref) ==0 ) { -patch_instruction (&dtlb_miss_exit_1, insn); -patch_instruction (&dtlb_miss_exit_2, insn); -patch_instruction (&dtlb_miss_exit_3, insn); +patch_instruction_site (&patch__dtlbmiss_exit_1, insn); +patch_instruction_site (&patch__dtlbmiss_exit_2, insn); +patch_instruction_site (&patch__dtlbmiss_exit_3, insn); }break ; }
Signature · 1 line
2.13.3
Michael Ellerman
AppliedRe: [v6,08/20] powerpc/8xx: Use patch_site for perf counters setup
Quoted 8 lines · Christophe Leroy
The 8xx TLB miss routines are patched when (de)activating perf counters.
This patch uses the new
patch_sitefunctionality in order to get a better code readability and avoid a label mess when dumping the code with 'objdump -d'Signed-off-by Christophe Leroy <[email protected]>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/709cf19c5749308603ffa12557d8bd
cheers
PATCH v6 9/20 powerpc/8xx: Move SW perf counters in first 32kb of memory
In reply to Christophe LeroyIn order to simplify time critical exceptions handling 8xx specific SW perf counters, this patch moves the counters into the beginning of memory. This is possible because .text is readable and the counters are never modified outside of the handlers.
By doing this, we avoid having to set a second register with the upper part of the address of the counters.
--- arch/powerpc/kernel/head_8xx.S | 58 ++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 30 deletions(-)
arch/powerpc/kernel/head_8xx.S +28 -30
@@ -106,6 +106,23 @@ turn_on_mmu: mtspr SPRN_SRR0,r0 rfi /* enables MMU */ + +#ifdef CONFIG_PERF_EVENTS + .align 4 + + .globl itlb_miss_counter +itlb_miss_counter: + .space 4 + + .globl dtlb_miss_counter +dtlb_miss_counter: + .space 4 + + .globl instruction_counter +instruction_counter: + .space 4 +#endif + /* * Exception entry code. This code runs with address translation * turned off, i.e. using physical addresses.
@@ -384,17 +401,16 @@ InstructionTLBMiss: #ifdef CONFIG_PERF_EVENTS patch_site 0f, patch__itlbmiss_perf -0: lis r10, (itlb_miss_counter - PAGE_OFFSET)@ha - lwz r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10) - addi r11, r11, 1 - stw r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10) -#endif +0: lwz r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) + addi r10, r10, 1 + stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 #if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE) mfspr r12, SPRN_SPRG_SCRATCH2 #endif rfi +#endif #ifdef CONFIG_HUGETLB_PAGE 10: /* 8M pages */
@@ -509,15 +525,14 @@ DataStoreTLBMiss: #ifdef CONFIG_PERF_EVENTS patch_site 0f, patch__dtlbmiss_perf -0: lis r10, (dtlb_miss_counter - PAGE_OFFSET)@ha - lwz r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10) - addi r11, r11, 1 - stw r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10) -#endif +0: lwz r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0) + addi r10, r10, 1 + stw r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0) mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 mfspr r12, SPRN_SPRG_SCRATCH2 rfi +#endif #ifdef CONFIG_HUGETLB_PAGE 10: /* 8M pages */
@@ -625,16 +640,13 @@ DataBreakpoint: . = 0x1d00 InstructionBreakpoint: mtspr SPRN_SPRG_SCRATCH0, r10 - mtspr SPRN_SPRG_SCRATCH1, r11 - lis r10, (instruction_counter - PAGE_OFFSET)@ha - lwz r11, (instruction_counter - PAGE_OFFSET)@l(r10) - addi r11, r11, -1 - stw r11, (instruction_counter - PAGE_OFFSET)@l(r10) + lwz r10, (instruction_counter - PAGE_OFFSET)@l(0) + addi r10, r10, -1 + stw r10, (instruction_counter - PAGE_OFFSET)@l(0) lis r10, 0xffff ori r10, r10, 0x01 mtspr SPRN_COUNTA, r10 mfspr r10, SPRN_SPRG_SCRATCH0 - mfspr r11, SPRN_SPRG_SCRATCH1 rfi #else EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
@@ -1065,17 +1077,3 @@ swapper_pg_dir: */ abatron_pteptrs: .space 8 - -#ifdef CONFIG_PERF_EVENTS - .globl itlb_miss_counter -itlb_miss_counter: - .space 4 - - .globl dtlb_miss_counter -dtlb_miss_counter: - .space 4 - - .globl instruction_counter -instruction_counter: - .space 4 -#endif
Signature · 1 line
2.13.3
PATCH v6 10/20 powerpc/8xx: Temporarily disable 16k pages and 512k hugepages
In reply to Christophe LeroyIn preparation of making use of hardware assistance in TLB handlers, this patch temporarily disables 16K pages and 512K pages. The reason is that when using HW assistance in 4K pages mode, the linux model fit with the HW model for 4K pages and 8M pages.
However for 16K pages and 512K mode some additional work is needed to get linux model fit with HW model.
Therefore the 4K pages mode will be implemented first and without support for 512k hugepages. Then the 512k hugepages will be brought back. And the 16K pages will be implemented in further steps.
--- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/head_8xx.S | 36 ------------------------------------ arch/powerpc/mm/tlb_nohash.c | 3 --- 3 files changed, 1 insertion(+), 40 deletions(-)
arch/powerpc/Kconfig +1 -1
@@ -690,7 +690,7 @@ config PPC_4K_PAGES config PPC_16K_PAGES bool "16k page size" - depends on 44x || PPC_8xx + depends on 44x config PPC_64K_PAGES bool "64k page size"
arch/powerpc/kernel/head_8xx.S +0 -36
@@ -363,7 +363,6 @@ InstructionTLBMiss: #ifdef CONFIG_HUGETLB_PAGE mtcr r11 bt- 28, 10f /* bit 28 = Large page (8M) */ - bt- 29, 20f /* bit 29 = Large page (8M or 512k) */ #endif rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */ lwz r10, 0(r10) /* Get the pte */
@@ -414,23 +413,8 @@ InstructionTLBMiss: #ifdef CONFIG_HUGETLB_PAGE 10: /* 8M pages */ -#ifdef CONFIG_PPC_16K_PAGES - /* Extract level 2 index */ - rlwinm r10, r10, 32 - (PAGE_SHIFT_8M - PAGE_SHIFT), 32 + PAGE_SHIFT_8M - (PAGE_SHIFT << 1), 29 - /* Add level 2 base */ - rlwimi r10, r11, 0, 0, 32 + PAGE_SHIFT_8M - (PAGE_SHIFT << 1) - 1 -#else /* Level 2 base */ rlwinm r10, r11, 0, ~HUGEPD_SHIFT_MASK -#endif - lwz r10, 0(r10) /* Get the pte */ - b 4b - -20: /* 512k pages */ - /* Extract level 2 index */ - rlwinm r10, r10, 32 - (PAGE_SHIFT_512K - PAGE_SHIFT), 32 + PAGE_SHIFT_512K - (PAGE_SHIFT << 1), 29 - /* Add level 2 base */ - rlwimi r10, r11, 0, 0, 32 + PAGE_SHIFT_512K - (PAGE_SHIFT << 1) - 1 lwz r10, 0(r10) /* Get the pte */ b 4b #endif
@@ -475,7 +459,6 @@ DataStoreTLBMiss: #ifdef CONFIG_HUGETLB_PAGE mtcr r11 bt- 28, 10f /* bit 28 = Large page (8M) */ - bt- 29, 20f /* bit 29 = Large page (8M or 512k) */ #endif rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */ lwz r10, 0(r10) /* Get the pte */
@@ -537,22 +520,8 @@ DataStoreTLBMiss: #ifdef CONFIG_HUGETLB_PAGE 10: /* 8M pages */ /* Extract level 2 index */ -#ifdef CONFIG_PPC_16K_PAGES - rlwinm r10, r10, 32 - (PAGE_SHIFT_8M - PAGE_SHIFT), 32 + PAGE_SHIFT_8M - (PAGE_SHIFT << 1), 29 - /* Add level 2 base */ - rlwimi r10, r11, 0, 0, 32 + PAGE_SHIFT_8M - (PAGE_SHIFT << 1) - 1 -#else /* Level 2 base */ rlwinm r10, r11, 0, ~HUGEPD_SHIFT_MASK -#endif - lwz r10, 0(r10) /* Get the pte */ - b 4b - -20: /* 512k pages */ - /* Extract level 2 index */ - rlwinm r10, r10, 32 - (PAGE_SHIFT_512K - PAGE_SHIFT), 32 + PAGE_SHIFT_512K - (PAGE_SHIFT << 1), 29 - /* Add level 2 base */ - rlwimi r10, r11, 0, 0, 32 + PAGE_SHIFT_512K - (PAGE_SHIFT << 1) - 1 lwz r10, 0(r10) /* Get the pte */ b 4b #endif
@@ -773,12 +742,7 @@ FixupDAR:/* Entry point for dcbx workaround. */ /* concat physical page address(r11) and page offset(r10) */ 200: -#ifdef CONFIG_PPC_16K_PAGES - rlwinm r11, r11, 0, 0, 32 + PAGE_SHIFT_8M - (PAGE_SHIFT << 1) - 1 - rlwimi r11, r10, 32 - (PAGE_SHIFT_8M - 2), 32 + PAGE_SHIFT_8M - (PAGE_SHIFT << 1), 29 -#else rlwinm r11, r10, 0, ~HUGEPD_SHIFT_MASK -#endif lwz r11, 0(r11) /* Get the pte */ /* concat physical page address(r11) and page offset(r10) */ rlwimi r11, r10, 0, 32 - PAGE_SHIFT_8M, 31
arch/powerpc/mm/tlb_nohash.c +0 -3
@@ -97,9 +97,6 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { .shift = 14, }, #endif - [MMU_PAGE_512K] = { - .shift = 19, - }, [MMU_PAGE_8M] = { .shift = 23, },
Signature · 1 line
2.13.3
PATCH v6 11/20 powerpc/mm: Use hardware assistance in TLB handlers on the 8xx
In reply to Christophe LeroyToday, on the 8xx the TLB handlers do SW tablewalk by doing all the calculation in ASM, in order to match with the Linux page table structure.
The 8xx offers hardware assistance which allows significant size reduction of the TLB handlers, hence also reduces the time spent in the handlers.
However, using this HW assistance implies some constraints on the page table structure:
- Regardless of the main page size used (4k or 16k), the level 1 table (PGD) contains 1024 entries and each PGD entry covers a 4Mbytes area which is managed by a level 2 table (PTE) containing also 1024 entries each describing a 4k page.
- 16k pages require 4 identifical entries in the L2 table
- 512k pages PTE have to be spread every 128 bytes in the L2 table
- 8M pages PTE are at the address pointed by the L1 entry and each 8M page require 2 identical entries in the PGD.
This patch modifies the TLB handlers to use HW assistance for 4K PAGES.
Before that patch, the mean time spent in TLB miss handlers is:
- ITLB miss: 80 ticks
- DTLB miss: 62 ticks
After that patch, the mean time spent in TLB miss handlers is:
- ITLB miss: 72 ticks
- DTLB miss: 54 ticks
So the improvement is 10% for ITLB and 13% for DTLB misses
--- arch/powerpc/kernel/head_8xx.S | 97 +++++++++++++----------------------------- arch/powerpc/mm/8xx_mmu.c | 4 +- 2 files changed, 32 insertions(+), 69 deletions(-)
arch/powerpc/kernel/head_8xx.S +30 -67
@@ -292,7 +292,7 @@ SystemCall: . = 0x1100 /* * For the MPC8xx, this is a software tablewalk to load the instruction - * TLB. The task switch loads the M_TW register with the pointer to the first + * TLB. The task switch loads the M_TWB register with the pointer to the first * level table. * If we discover there is no second level table (value is zero) or if there * is an invalid pte, we load that into the TLB, which causes another fault
@@ -314,7 +314,7 @@ SystemCall: InstructionTLBMiss: mtspr SPRN_SPRG_SCRATCH0, r10 mtspr SPRN_SPRG_SCRATCH1, r11 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE) +#ifdef ITLB_MISS_KERNEL mtspr SPRN_SPRG_SCRATCH2, r12 #endif
@@ -323,12 +323,11 @@ InstructionTLBMiss: */ mfspr r10, SPRN_SRR0 /* Get effective address of fault */ INVALIDATE_ADJACENT_PAGES_CPU15(r11, r10) + mtspr SPRN_MD_EPN, r10 /* Only modules will cause ITLB Misses as we always * pin the first 8MB of kernel memory */ -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE) - mfcr r12 -#endif #ifdef ITLB_MISS_KERNEL + mfcr r12 #if defined(SIMPLE_KERNEL_ADDRESS) && defined(CONFIG_PIN_TLB_TEXT) andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ #else
@@ -341,7 +340,7 @@ InstructionTLBMiss: #endif #endif #endif - mfspr r11, SPRN_M_TW /* Get level 1 table */ + mfspr r11, SPRN_M_TWB /* Get level 1 table */ #ifdef ITLB_MISS_KERNEL #if defined(SIMPLE_KERNEL_ADDRESS) && defined(CONFIG_PIN_TLB_TEXT) beq+ 3f
@@ -351,23 +350,17 @@ InstructionTLBMiss: #ifndef CONFIG_PIN_TLB_TEXT blt cr7, ITLBMissLinear #endif - lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha + rlwinm r11, r11, 0, 20, 31 + oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha 3: #endif - /* Insert level 1 index */ - rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ - /* Extract level 2 index */ - rlwinm r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 -#ifdef CONFIG_HUGETLB_PAGE - mtcr r11 - bt- 28, 10f /* bit 28 = Large page (8M) */ -#endif - rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */ + mtspr SPRN_MD_TWC, r11 + mfspr r10, SPRN_MD_TWC lwz r10, 0(r10) /* Get the pte */ -4: -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE) + +#ifdef ITLB_MISS_KERNEL mtcr r12 #endif /* Load the MI_TWC with the attributes for this "segment." */
@@ -392,7 +385,7 @@ InstructionTLBMiss: /* Restore registers */ 0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE) +#ifdef ITLB_MISS_KERNEL mfspr r12, SPRN_SPRG_SCRATCH2 #endif rfi
@@ -405,20 +398,12 @@ InstructionTLBMiss: stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE) +#ifdef ITLB_MISS_KERNEL mfspr r12, SPRN_SPRG_SCRATCH2 #endif rfi #endif -#ifdef CONFIG_HUGETLB_PAGE -10: /* 8M pages */ - /* Level 2 base */ - rlwinm r10, r11, 0, ~HUGEPD_SHIFT_MASK - lwz r10, 0(r10) /* Get the pte */ - b 4b -#endif - . = 0x1200 DataStoreTLBMiss: mtspr SPRN_SPRG_SCRATCH0, r10
@@ -432,7 +417,7 @@ DataStoreTLBMiss: mfspr r10, SPRN_MD_EPN rlwinm r11, r10, 16, 0xfff8 cmpli cr0, r11, PAGE_OFFSET@h - mfspr r11, SPRN_M_TW /* Get level 1 table */ + mfspr r11, SPRN_M_TWB /* Get level 1 table */ blt+ 3f rlwinm r11, r10, 16, 0xfff8 #ifndef CONFIG_PIN_TLB_IMMR
@@ -445,24 +430,16 @@ DataStoreTLBMiss: patch_site 0b, patch__dtlbmiss_immr_jmp #endif blt cr7, DTLBMissLinear - lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha + mfspr r11, SPRN_M_TWB /* Get level 1 table */ + rlwinm r11, r11, 0, 20, 31 + oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha 3: - - /* Insert level 1 index */ - rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ - /* We have a pte table, so load fetch the pte from the table. - */ - /* Extract level 2 index */ - rlwinm r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 -#ifdef CONFIG_HUGETLB_PAGE - mtcr r11 - bt- 28, 10f /* bit 28 = Large page (8M) */ -#endif - rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */ + mtspr SPRN_MD_TWC, r11 + mfspr r10, SPRN_MD_TWC lwz r10, 0(r10) /* Get the pte */ -4: + mtcr r12 /* Insert the Guarded flag into the TWC from the Linux PTE.
@@ -517,15 +494,6 @@ DataStoreTLBMiss: rfi #endif -#ifdef CONFIG_HUGETLB_PAGE -10: /* 8M pages */ - /* Extract level 2 index */ - /* Level 2 base */ - rlwinm r10, r11, 0, ~HUGEPD_SHIFT_MASK - lwz r10, 0(r10) /* Get the pte */ - b 4b -#endif - /* This is an instruction TLB error on the MPC8xx. This could be due * to many reasons, such as executing guarded memory or illegal instruction * addresses. There is nothing to do but handle a big time error fault.
@@ -696,9 +664,10 @@ FixupDAR:/* Entry point for dcbx workaround. */ mtspr SPRN_SPRG_SCRATCH2, r10 /* fetch instruction from memory. */ mfspr r10, SPRN_SRR0 + mtspr SPRN_MD_EPN, r10 rlwinm r11, r10, 16, 0xfff8 cmpli cr0, r11, PAGE_OFFSET@h - mfspr r11, SPRN_M_TW /* Get level 1 table */ + mfspr r11, SPRN_M_TWB /* Get level 1 table */ blt+ 3f rlwinm r11, r10, 16, 0xfff8
@@ -708,17 +677,17 @@ FixupDAR:/* Entry point for dcbx workaround. */ /* create physical page address from effective address */ tophys(r11, r10) blt- cr7, 201f - lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha - /* Insert level 1 index */ -3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 + mfspr r11, SPRN_M_TWB /* Get level 1 table */ + rlwinm r11, r11, 0, 20, 31 + oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha +3: lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ + mtspr SPRN_MD_TWC, r11 mtcr r11 + mfspr r11, SPRN_MD_TWC + lwz r11, 0(r11) /* Get the pte */ bt 28,200f /* bit 28 = Large page (8M) */ bt 29,202f /* bit 29 = Large page (8M or 512K) */ - rlwinm r11, r11,0,0,19 /* Extract page descriptor page address */ - /* Insert level 2 index */ - rlwimi r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 - lwz r11, 0(r11) /* Get the pte */ /* concat physical page address(r11) and page offset(r10) */ rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31 201: lwz r11,0(r11)
@@ -740,18 +709,12 @@ FixupDAR:/* Entry point for dcbx workaround. */ 141: mfspr r10,SPRN_SPRG_SCRATCH2 b DARFixed /* Nope, go back to normal TLB processing */ - /* concat physical page address(r11) and page offset(r10) */ 200: - rlwinm r11, r10, 0, ~HUGEPD_SHIFT_MASK - lwz r11, 0(r11) /* Get the pte */ /* concat physical page address(r11) and page offset(r10) */ rlwimi r11, r10, 0, 32 - PAGE_SHIFT_8M, 31 b 201b 202: - rlwinm r11, r11, 0, 0, 32 + PAGE_SHIFT_512K - (PAGE_SHIFT << 1) - 1 - rlwimi r11, r10, 32 - (PAGE_SHIFT_512K - 2), 32 + PAGE_SHIFT_512K - (PAGE_SHIFT << 1), 29 - lwz r11, 0(r11) /* Get the pte */ /* concat physical page address(r11) and page offset(r10) */ rlwimi r11, r10, 0, 32 - PAGE_SHIFT_512K, 31 b 201b
@@ -867,7 +830,7 @@ start_here: lis r6, swapper_pg_dir@ha tophys(r6,r6) - mtspr SPRN_M_TW, r6 + mtspr SPRN_M_TWB, r6 bl early_init /* We have to do this with MMU on */
arch/powerpc/mm/8xx_mmu.c +2 -2
@@ -174,12 +174,12 @@ void set_context(unsigned long id, pgd_t *pgd) *(ptr +1 ) = pgd;#endif -/* Register M_TW will contain base address of level 1 table minus the +/* Register M_TWB will contain base address of level 1 table minus the * lower part of the kernel PGDIR base address, so that all accesses to * level 1 table are done relative to lower part of kernel PGDIR base * address. */ -mtspr (SPRN_M_TW ,__pa (pgd) - offset); +mtspr (SPRN_M_TWB ,__pa (pgd) - offset);/* Update context */ mtspr (SPRN_M_CASID , id -1 );
Signature · 1 line
2.13.3
PATCH v6 12/20 powerpc/mm: Enable 512k hugepage support with HW assistance on the 8xx
In reply to Christophe LeroyFor using 512k pages with hardware assistance, the PTEs have to be spread every 128 bytes in the L2 table.
--- arch/powerpc/include/asm/hugetlb.h | 4 +++- arch/powerpc/mm/hugetlbpage.c | 13 +++++++++++++ arch/powerpc/mm/tlb_nohash.c | 3 +++ 3 files changed, 19 insertions(+), 1 deletion(-)
arch/powerpc/include/asm/hugetlb.h +3 -1
@@ -75,7 +75,9 @@ static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr,unsigned long idx =0 ;pte_t *dir =hugepd_page (hpd); -#ifndef CONFIG_PPC_FSL_BOOK3E +#ifdef CONFIG_PPC_8xx + idx = (addr & ((1UL << pdshift) -1 )) >>PAGE_SHIFT ; +#elif !defined(CONFIG_PPC_FSL_BOOK3E ) idx = (addr & ((1UL << pdshift) -1 )) >>hugepd_shift (hpd);#endif
arch/powerpc/mm/hugetlbpage.c +13 -0
@@ -67,7 +67,11 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, cachep =PGT_CACHE (PTE_T_ORDER ); num_hugepd =1 << (pshift - pdshift); }else { +#ifdef CONFIG_PPC_8xx + cachep =PGT_CACHE (PTE_SHIFT ); +#else cachep =PGT_CACHE (pdshift - pshift); +#endif num_hugepd =1 ; }
@@ -333,8 +337,13 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshifif (shift >= pdshift)hugepd_free (tlb, hugepte); else +#ifdef CONFIG_PPC_8xx +pgtable_free_tlb (tlb, hugepte, +get_hugepd_cache_index (PTE_SHIFT )); +#else pgtable_free_tlb (tlb, hugepte,get_hugepd_cache_index (pdshift - shift)); +#endif } static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
@@ -702,7 +711,11 @@ static int __init hugetlbpage_init(void)* use pgt cache for hugepd. */ if (pdshift > shift) +#ifdef CONFIG_PPC_8xx +pgtable_cache_add (PTE_SHIFT ); +#else pgtable_cache_add (pdshift - shift); +#endif #if defined(CONFIG_PPC_FSL_BOOK3E ) || defined(CONFIG_PPC_8xx) elsepgtable_cache_add (PTE_T_ORDER );
arch/powerpc/mm/tlb_nohash.c +3 -0
@@ -97,6 +97,9 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { .shift = 14, }, #endif + [MMU_PAGE_512K] = { + .shift = 19, + }, [MMU_PAGE_8M] = { .shift = 23, },
Signature · 1 line
2.13.3
PATCH v6 13/20 powerpc/8xx: don't use r12/SPRN_SPRG_SCRATCH2 in TLB Miss handlers
In reply to Christophe LeroyThis patch reworks the TLB Miss handler in order to not use r12 register, hence avoiding having to save it into SPRN_SPRG_SCRATCH2.
In the DAR Fixup code we can now use SPRN_M_TW, freeing SPRN_SPRG_SCRATCH2.
Then SPRN_SPRG_SCRATCH2 may be used for something else in the future.
--- arch/powerpc/kernel/head_8xx.S | 110 ++++++++++++++++++----------------------- 1 file changed, 49 insertions(+), 61 deletions(-)
arch/powerpc/kernel/head_8xx.S +49 -61
@@ -302,91 +302,88 @@ SystemCall: */ #ifdef CONFIG_8xx_CPU15 -#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr) \ - addi tmp, addr, PAGE_SIZE; \ - tlbie tmp; \ - addi tmp, addr, -PAGE_SIZE; \ - tlbie tmp +#define INVALIDATE_ADJACENT_PAGES_CPU15(addr) \ + addi addr, addr, PAGE_SIZE; \ + tlbie addr; \ + addi addr, addr, -(PAGE_SIZE << 1); \ + tlbie addr; \ + addi addr, addr, PAGE_SIZE #else -#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr) +#define INVALIDATE_ADJACENT_PAGES_CPU15(addr) #endif InstructionTLBMiss: mtspr SPRN_SPRG_SCRATCH0, r10 +#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) mtspr SPRN_SPRG_SCRATCH1, r11 -#ifdef ITLB_MISS_KERNEL - mtspr SPRN_SPRG_SCRATCH2, r12 #endif /* If we are faulting a kernel address, we have to use the * kernel page tables. */ mfspr r10, SPRN_SRR0 /* Get effective address of fault */ - INVALIDATE_ADJACENT_PAGES_CPU15(r11, r10) + INVALIDATE_ADJACENT_PAGES_CPU15(r10) mtspr SPRN_MD_EPN, r10 /* Only modules will cause ITLB Misses as we always * pin the first 8MB of kernel memory */ #ifdef ITLB_MISS_KERNEL - mfcr r12 + mfcr r11 #if defined(SIMPLE_KERNEL_ADDRESS) && defined(CONFIG_PIN_TLB_TEXT) - andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ + cmpi cr0, r10, 0 /* Address >= 0x80000000 */ #else - rlwinm r11, r10, 16, 0xfff8 - cmpli cr0, r11, PAGE_OFFSET@h + rlwinm r10, r10, 16, 0xfff8 + cmpli cr0, r10, PAGE_OFFSET@h #ifndef CONFIG_PIN_TLB_TEXT /* It is assumed that kernel code fits into the first 8M page */ -0: cmpli cr7, r11, (PAGE_OFFSET + 0x0800000)@h +0: cmpli cr7, r10, (PAGE_OFFSET + 0x0800000)@h patch_site 0b, patch__itlbmiss_linmem_top #endif #endif #endif - mfspr r11, SPRN_M_TWB /* Get level 1 table */ + mfspr r10, SPRN_M_TWB /* Get level 1 table */ #ifdef ITLB_MISS_KERNEL #if defined(SIMPLE_KERNEL_ADDRESS) && defined(CONFIG_PIN_TLB_TEXT) - beq+ 3f + bge+ 3f #else blt+ 3f #endif #ifndef CONFIG_PIN_TLB_TEXT blt cr7, ITLBMissLinear #endif - rlwinm r11, r11, 0, 20, 31 - oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha + rlwinm r10, r10, 0, 20, 31 + oris r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha 3: #endif - lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ + lwz r10, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */ + mtspr SPRN_MI_TWC, r10 /* Set segment attributes */ - mtspr SPRN_MD_TWC, r11 + mtspr SPRN_MD_TWC, r10 mfspr r10, SPRN_MD_TWC lwz r10, 0(r10) /* Get the pte */ #ifdef ITLB_MISS_KERNEL - mtcr r12 + mtcr r11 #endif - /* Load the MI_TWC with the attributes for this "segment." */ - mtspr SPRN_MI_TWC, r11 /* Set segment attributes */ - #ifdef CONFIG_SWAP rlwinm r11, r10, 32-5, _PAGE_PRESENT and r11, r11, r10 rlwimi r10, r11, 0, _PAGE_PRESENT #endif - li r11, RPN_PATTERN | 0x200 /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 20 and 23 must be clear. * Software indicator bits 22, 24, 25, 26, and 27 must be * set. All other Linux PTE bits control the behavior * of the MMU. */ - rlwimi r11, r10, 4, 0x0400 /* Copy _PAGE_EXEC into bit 21 */ - rlwimi r10, r11, 0, 0x0ff0 /* Set 22, 24-27, clear 20,23 */ + rlwimi r10, r10, 0, 0x0f00 /* Clear bits 20-23 */ + rlwimi r10, r10, 4, 0x0400 /* Copy _PAGE_EXEC into bit 21 */ + ori r10, r10, RPN_PATTERN | 0x200 /* Set 22 and 24-27 */ mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ /* Restore registers */ 0: mfspr r10, SPRN_SPRG_SCRATCH0 +#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) mfspr r11, SPRN_SPRG_SCRATCH1 -#ifdef ITLB_MISS_KERNEL - mfspr r12, SPRN_SPRG_SCRATCH2 #endif rfi patch_site 0b, patch__itlbmiss_exit_1
@@ -397,9 +394,8 @@ InstructionTLBMiss: addi r10, r10, 1 stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) mfspr r10, SPRN_SPRG_SCRATCH0 +#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) mfspr r11, SPRN_SPRG_SCRATCH1 -#ifdef ITLB_MISS_KERNEL - mfspr r12, SPRN_SPRG_SCRATCH2 #endif rfi #endif
@@ -408,40 +404,37 @@ InstructionTLBMiss: DataStoreTLBMiss: mtspr SPRN_SPRG_SCRATCH0, r10 mtspr SPRN_SPRG_SCRATCH1, r11 - mtspr SPRN_SPRG_SCRATCH2, r12 - mfcr r12 + mfcr r11 /* If we are faulting a kernel address, we have to use the * kernel page tables. */ mfspr r10, SPRN_MD_EPN - rlwinm r11, r10, 16, 0xfff8 - cmpli cr0, r11, PAGE_OFFSET@h - mfspr r11, SPRN_M_TWB /* Get level 1 table */ - blt+ 3f - rlwinm r11, r10, 16, 0xfff8 + rlwinm r10, r10, 16, 0xfff8 + cmpli cr0, r10, PAGE_OFFSET@h #ifndef CONFIG_PIN_TLB_IMMR - cmpli cr0, r11, VIRT_IMMR_BASE@h + cmpli cr6, r10, VIRT_IMMR_BASE@h #endif -0: cmpli cr7, r11, (PAGE_OFFSET + 0x1800000)@h +0: cmpli cr7, r10, (PAGE_OFFSET + 0x1800000)@h patch_site 0b, patch__dtlbmiss_linmem_top + + mfspr r10, SPRN_M_TWB /* Get level 1 table */ + blt+ 3f #ifndef CONFIG_PIN_TLB_IMMR -0: beq- DTLBMissIMMR +0: beq- cr6, DTLBMissIMMR patch_site 0b, patch__dtlbmiss_immr_jmp #endif blt cr7, DTLBMissLinear - mfspr r11, SPRN_M_TWB /* Get level 1 table */ - rlwinm r11, r11, 0, 20, 31 - oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha + rlwinm r10, r10, 0, 20, 31 + oris r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha 3: - lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ + mtcr r11 + lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */ mtspr SPRN_MD_TWC, r11 mfspr r10, SPRN_MD_TWC lwz r10, 0(r10) /* Get the pte */ - mtcr r12 - /* Insert the Guarded flag into the TWC from the Linux PTE. * It is bit 27 of both the Linux PTE and the TWC (at least * I got that right :-). It will be better when we can put
@@ -479,7 +472,6 @@ DataStoreTLBMiss: 0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r12, SPRN_SPRG_SCRATCH2 rfi patch_site 0b, patch__dtlbmiss_exit_1
@@ -490,7 +482,6 @@ DataStoreTLBMiss: stw r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0) mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r12, SPRN_SPRG_SCRATCH2 rfi #endif
@@ -598,7 +589,7 @@ InstructionBreakpoint: * not enough space in the DataStoreTLBMiss area. */ DTLBMissIMMR: - mtcr r12 + mtcr r11 /* Set 512k byte guarded page and mark it valid */ li r10, MD_PS512K | MD_GUARDED | MD_SVALID mtspr SPRN_MD_TWC, r10
@@ -613,16 +604,15 @@ DTLBMissIMMR: 0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r12, SPRN_SPRG_SCRATCH2 rfi patch_site 0b, patch__dtlbmiss_exit_2 DTLBMissLinear: - mtcr r12 + mtcr r11 /* Set 8M byte page and mark it valid */ li r11, MD_PS8MEG | MD_SVALID mtspr SPRN_MD_TWC, r11 - rlwinm r10, r10, 0, 0x0f800000 /* 8xx supports max 256Mb RAM */ + rlwinm r10, r10, 20, 0x0f800000 /* 8xx supports max 256Mb RAM */ ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ _PAGE_PRESENT mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
@@ -632,24 +622,22 @@ DTLBMissLinear: 0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r12, SPRN_SPRG_SCRATCH2 rfi patch_site 0b, patch__dtlbmiss_exit_3 #ifndef CONFIG_PIN_TLB_TEXT ITLBMissLinear: - mtcr r12 + mtcr r11 /* Set 8M byte page and mark it valid */ li r11, MI_PS8MEG | MI_SVALID mtspr SPRN_MI_TWC, r11 - rlwinm r10, r10, 0, 0x0f800000 /* 8xx supports max 256Mb RAM */ + rlwinm r10, r10, 20, 0x0f800000 /* 8xx supports max 256Mb RAM */ ori r10, r10, 0xf0 | MI_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ _PAGE_PRESENT mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ 0: mfspr r10, SPRN_SPRG_SCRATCH0 mfspr r11, SPRN_SPRG_SCRATCH1 - mfspr r12, SPRN_SPRG_SCRATCH2 rfi patch_site 0b, patch__itlbmiss_exit_2 #endif
@@ -661,7 +649,7 @@ ITLBMissLinear: /* define if you don't want to use self modifying code */ #define NO_SELF_MODIFYING_CODE FixupDAR:/* Entry point for dcbx workaround. */ - mtspr SPRN_SPRG_SCRATCH2, r10 + mtspr SPRN_M_TW, r10 /* fetch instruction from memory. */ mfspr r10, SPRN_SRR0 mtspr SPRN_MD_EPN, r10
@@ -706,7 +694,7 @@ FixupDAR:/* Entry point for dcbx workaround. */ beq+ 142f cmpwi cr0, r10, 1964 /* Is icbi? */ beq+ 142f -141: mfspr r10,SPRN_SPRG_SCRATCH2 +141: mfspr r10,SPRN_M_TW b DARFixed /* Nope, go back to normal TLB processing */ 200:
@@ -741,7 +729,7 @@ modified_instr: bne+ 143f subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */ 143: mtdar r10 /* store faulting EA in DAR */ - mfspr r10,SPRN_SPRG_SCRATCH2 + mfspr r10,SPRN_M_TW b DARFixed /* Go back to normal TLB handling */ #else mfctr r10
@@ -795,7 +783,7 @@ modified_instr: mfdar r11 mtctr r11 /* restore ctr reg from DAR */ mtdar r10 /* save fault EA to DAR */ - mfspr r10,SPRN_SPRG_SCRATCH2 + mfspr r10,SPRN_M_TW b DARFixed /* Go back to normal TLB handling */ /* special handling for r10,r11 since these are modified already */
Signature · 1 line
2.13.3
PATCH v6 14/20 powerpc/8xx: regroup TLB handler routines
In reply to Christophe LeroyAs this is running with MMU off, the CPU only does speculative fetch for code in the same page.
Following the significant size reduction of TLB handler routines, the side handlers can be brought back close to the main part, ie in the same page.
--- arch/powerpc/kernel/head_8xx.S | 112 ++++++++++++++++++++--------------------- 1 file changed, 54 insertions(+), 58 deletions(-)
arch/powerpc/kernel/head_8xx.S +54 -58
@@ -400,6 +400,23 @@ InstructionTLBMiss: rfi #endif +#ifndef CONFIG_PIN_TLB_TEXT +ITLBMissLinear: + mtcr r11 + /* Set 8M byte page and mark it valid */ + li r11, MI_PS8MEG | MI_SVALID + mtspr SPRN_MI_TWC, r11 + rlwinm r10, r10, 20, 0x0f800000 /* 8xx supports max 256Mb RAM */ + ori r10, r10, 0xf0 | MI_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ + _PAGE_PRESENT + mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ + +0: mfspr r10, SPRN_SPRG_SCRATCH0 + mfspr r11, SPRN_SPRG_SCRATCH1 + rfi + patch_site 0b, patch__itlbmiss_exit_2 +#endif + . = 0x1200 DataStoreTLBMiss: mtspr SPRN_SPRG_SCRATCH0, r10
@@ -485,6 +502,43 @@ DataStoreTLBMiss: rfi #endif +DTLBMissIMMR: + mtcr r11 + /* Set 512k byte guarded page and mark it valid */ + li r10, MD_PS512K | MD_GUARDED | MD_SVALID + mtspr SPRN_MD_TWC, r10 + mfspr r10, SPRN_IMMR /* Get current IMMR */ + rlwinm r10, r10, 0, 0xfff80000 /* Get 512 kbytes boundary */ + ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ + _PAGE_PRESENT | _PAGE_NO_CACHE + mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ + + li r11, RPN_PATTERN + mtspr SPRN_DAR, r11 /* Tag DAR */ + +0: mfspr r10, SPRN_SPRG_SCRATCH0 + mfspr r11, SPRN_SPRG_SCRATCH1 + rfi + patch_site 0b, patch__dtlbmiss_exit_2 + +DTLBMissLinear: + mtcr r11 + /* Set 8M byte page and mark it valid */ + li r11, MD_PS8MEG | MD_SVALID + mtspr SPRN_MD_TWC, r11 + rlwinm r10, r10, 20, 0x0f800000 /* 8xx supports max 256Mb RAM */ + ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ + _PAGE_PRESENT + mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ + + li r11, RPN_PATTERN + mtspr SPRN_DAR, r11 /* Tag DAR */ + +0: mfspr r10, SPRN_SPRG_SCRATCH0 + mfspr r11, SPRN_SPRG_SCRATCH1 + rfi + patch_site 0b, patch__dtlbmiss_exit_3 + /* This is an instruction TLB error on the MPC8xx. This could be due * to many reasons, such as executing guarded memory or illegal instruction * addresses. There is nothing to do but handle a big time error fault.
@@ -584,64 +638,6 @@ InstructionBreakpoint: . = 0x2000 -/* - * Bottom part of DataStoreTLBMiss handlers for IMMR area and linear RAM. - * not enough space in the DataStoreTLBMiss area. - */ -DTLBMissIMMR: - mtcr r11 - /* Set 512k byte guarded page and mark it valid */ - li r10, MD_PS512K | MD_GUARDED | MD_SVALID - mtspr SPRN_MD_TWC, r10 - mfspr r10, SPRN_IMMR /* Get current IMMR */ - rlwinm r10, r10, 0, 0xfff80000 /* Get 512 kbytes boundary */ - ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ - _PAGE_PRESENT | _PAGE_NO_CACHE - mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ - - li r11, RPN_PATTERN - mtspr SPRN_DAR, r11 /* Tag DAR */ - -0: mfspr r10, SPRN_SPRG_SCRATCH0 - mfspr r11, SPRN_SPRG_SCRATCH1 - rfi - patch_site 0b, patch__dtlbmiss_exit_2 - -DTLBMissLinear: - mtcr r11 - /* Set 8M byte page and mark it valid */ - li r11, MD_PS8MEG | MD_SVALID - mtspr SPRN_MD_TWC, r11 - rlwinm r10, r10, 20, 0x0f800000 /* 8xx supports max 256Mb RAM */ - ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ - _PAGE_PRESENT - mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ - - li r11, RPN_PATTERN - mtspr SPRN_DAR, r11 /* Tag DAR */ - -0: mfspr r10, SPRN_SPRG_SCRATCH0 - mfspr r11, SPRN_SPRG_SCRATCH1 - rfi - patch_site 0b, patch__dtlbmiss_exit_3 - -#ifndef CONFIG_PIN_TLB_TEXT -ITLBMissLinear: - mtcr r11 - /* Set 8M byte page and mark it valid */ - li r11, MI_PS8MEG | MI_SVALID - mtspr SPRN_MI_TWC, r11 - rlwinm r10, r10, 20, 0x0f800000 /* 8xx supports max 256Mb RAM */ - ori r10, r10, 0xf0 | MI_SPS16K | _PAGE_SH | _PAGE_DIRTY | \ - _PAGE_PRESENT - mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ - -0: mfspr r10, SPRN_SPRG_SCRATCH0 - mfspr r11, SPRN_SPRG_SCRATCH1 - rfi - patch_site 0b, patch__itlbmiss_exit_2 -#endif - /* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions * by decoding the registers used by the dcbx instruction and adding them. * DAR is set to the calculated address.
Signature · 1 line
2.13.3
PATCH v6 15/20 powerpc/mm: don't use pte_alloc_one_kernel() before slab is available
In reply to Christophe LeroyIn the same way as PPC64, let's handle pte allocation directly in kernel_map_page() when slab is not available.
The new function early_pte_alloc_kernel() is put in as inline in platforms pgalloc.h, this will allow to have different ones later. It is not an issue because early_pte_alloc_kernel() is called only once from map_kernel_page() and is inlined anyway.
--- arch/powerpc/include/asm/book3s/32/pgalloc.h | 15 +++++++++++++++ arch/powerpc/include/asm/nohash/32/pgalloc.h | 15 +++++++++++++++ arch/powerpc/mm/pgtable_32.c | 20 +++++++------------- 3 files changed, 37 insertions(+), 13 deletions(-)
arch/powerpc/include/asm/book3s/32/pgalloc.h +15 -0
@@ -4,6 +4,7 @@#include <linux/threads.h> #include <linux/slab.h> +#include <linux/memblock.h> /* * Functions that deal with pagetables that could be at any level of
@@ -137,4 +138,18 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, {pgtable_free_tlb (tlb,page_address (table),0 ); } + +static inline pte_t *early_pte_alloc_kernel (pmd_t *pmdp,unsigned long va) +{ +if (!pmd_present (*pmdp)) { +pte_t *ptep =__va (memblock_alloc (PAGE_SIZE ,PAGE_SIZE )); + +if (!ptep) +return NULL ; + +clear_page (ptep); +pmd_populate_kernel (&init_mm, pmdp, ptep); + } +return pte_offset_kernel (pmdp, va); +}#endif /* _ASM_POWERPC_BOOK3S_32_PGALLOC_H */
arch/powerpc/include/asm/nohash/32/pgalloc.h +15 -0
@@ -4,6 +4,7 @@#include <linux/threads.h> #include <linux/slab.h> +#include <linux/memblock.h> /* * Functions that deal with pagetables that could be at any level of
@@ -139,4 +140,18 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,tlb_flush_pgtable (tlb, address); pgtable_free_tlb(tlb, page_address(table), 0); } + +static inline pte_t *early_pte_alloc_kernel (pmd_t *pmdp,unsigned long va) +{ +if (!pmd_present (*pmdp)) { +pte_t *ptep =__va (memblock_alloc (PAGE_SIZE ,PAGE_SIZE )); + +if (!ptep) +return NULL ; + +clear_page (ptep); +pmd_populate_kernel (&init_mm, pmdp, ptep); + } +return pte_offset_kernel (pmdp, va); +}#endif /* _ASM_POWERPC_PGALLOC_32_H */
arch/powerpc/mm/pgtable_32.c +7 -13
@@ -43,18 +43,9 @@ EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */extern char etext[], _stext[], _sinittext[], _einittext[]; -__ref pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long address) +pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long address) { -pte_t *pte; - -if (slab_is_available ()) { - pte = (pte_t *)__get_free_page (GFP_KERNEL |__GFP_ZERO); - }else { - pte =__va (memblock_alloc (PAGE_SIZE ,PAGE_SIZE )); -if (pte) -clear_page (pte); - } -return pte; +return (pte_t *)__get_free_page (GFP_KERNEL | __GFP_ZERO); }pgtable_t pte_alloc_one (struct mm_struct *mm,unsigned long address)
@@ -222,7 +213,7 @@ void iounmap(volatile void __iomem *addr) }EXPORT_SYMBOL (iounmap); -int map_kernel_page (unsigned long va,phys_addr_t pa,pgprot_t prot) +__ref int map_kernel_page (unsigned long va,phys_addr_t pa,pgprot_t prot) {pmd_t *pd;pte_t *pg;
@@ -231,7 +222,10 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot)/* Use upper 10 bits of VA to index the first level map */ pd =pmd_offset (pud_offset (pgd_offset_k (va), va), va);/* Use middle 10 bits of VA to index the second-level map */ - pg =pte_alloc_kernel (pd, va); +if (slab_is_available ()) + pg =pte_alloc_kernel (pd, va); +else + pg =early_pte_alloc_kernel (pd, va);if (pg !=0 ) { err =0 ;/* The PTE should never be already set nor present in the
Signature · 1 line
2.13.3
PATCH v6 16/20 powerpc/mm: inline pte_alloc_one() and pte_alloc_one_kernel() in PPC32
In reply to Christophe LeroyAs in PPC64, inline pte_alloc_one() and pte_alloc_one_kernel() in PPC32. This will allow to switch nohash/32 to pte_fragment without impacting hash/32.
--- arch/powerpc/include/asm/book3s/32/pgalloc.h | 22 ++++++++++++++++++++-- arch/powerpc/include/asm/nohash/32/pgalloc.h | 22 ++++++++++++++++++++-- arch/powerpc/mm/pgtable_32.c | 21 --------------------- 3 files changed, 40 insertions(+), 25 deletions(-)
arch/powerpc/include/asm/book3s/32/pgalloc.h +20 -2
@@ -80,8 +80,26 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp,#define pmd_pgtable (pmd) pmd_page(pmd)#endif -extern pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long addr); -extern pgtable_t pte_alloc_one (struct mm_struct *mm,unsigned long addr); +static inline pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long address) +{ +return (pte_t *)__get_free_page (GFP_KERNEL | __GFP_ZERO); +} + +static inline pgtable_t pte_alloc_one (struct mm_struct *mm,unsigned long address) +{ +struct page *ptepage; + +gfp_t flags =GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT; + + ptepage =alloc_pages (flags,0 ); +if (!ptepage) +return NULL ; +if (!pgtable_page_ctor (ptepage)) { +__free_page (ptepage); +return NULL ; + } +return ptepage; +}static inline void pte_free_kernel (struct mm_struct *mm,pte_t *pte) {
arch/powerpc/include/asm/nohash/32/pgalloc.h +20 -2
@@ -81,8 +81,26 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp,#define pmd_pgtable (pmd) pmd_page(pmd)#endif -extern pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long addr); -extern pgtable_t pte_alloc_one (struct mm_struct *mm,unsigned long addr); +static inline pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long address) +{ +return (pte_t *)__get_free_page (GFP_KERNEL | __GFP_ZERO); +} + +static inline pgtable_t pte_alloc_one (struct mm_struct *mm,unsigned long address) +{ +struct page *ptepage; + +gfp_t flags =GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT; + + ptepage =alloc_pages (flags,0 ); +if (!ptepage) +return NULL ; +if (!pgtable_page_ctor (ptepage)) { +__free_page (ptepage); +return NULL ; + } +return ptepage; +}static inline void pte_free_kernel (struct mm_struct *mm,pte_t *pte) {
arch/powerpc/mm/pgtable_32.c +0 -21
@@ -43,27 +43,6 @@ EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */extern char etext[], _stext[], _sinittext[], _einittext[]; -pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long address) -{ -return (pte_t *)__get_free_page (GFP_KERNEL | __GFP_ZERO); -} - -pgtable_t pte_alloc_one (struct mm_struct *mm,unsigned long address) -{ -struct page *ptepage; - -gfp_t flags =GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT; - - ptepage =alloc_pages (flags,0 ); -if (!ptepage) -return NULL ; -if (!pgtable_page_ctor (ptepage)) { -__free_page (ptepage); -return NULL ; - } -return ptepage; -} -void __iomem *ioremap (phys_addr_t addr,unsigned long size) {
Signature · 1 line
2.13.3
PATCH v6 17/20 powerpc/book3s32: Remove CONFIG_BOOKE dependent code
In reply to Christophe LeroyBOOK3S/32 cannot be BOOKE, so remove useless code
--- arch/powerpc/include/asm/book3s/32/pgalloc.h | 18 ------------------ arch/powerpc/include/asm/book3s/32/pgtable.h | 14 -------------- 2 files changed, 32 deletions(-)
arch/powerpc/include/asm/book3s/32/pgalloc.h +0 -18
@@ -48,8 +48,6 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)#define __pmd_free_tlb (tlb,x,a) do { } while (0)/* #define pgd_populate(mm, pmd, pte) BUG() */ -#ifndef CONFIG_BOOKE -static inline void pmd_populate_kernel (struct mm_struct *mm,pmd_t *pmdp,pte_t *pte) {
@@ -63,22 +61,6 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp, }#define pmd_pgtable (pmd) pmd_page(pmd) -#else - -static inline void pmd_populate_kernel (struct mm_struct *mm,pmd_t *pmdp, -pte_t *pte) -{ - *pmdp =__pmd ((unsigned long )pte | _PMD_PRESENT); -} - -static inline void pmd_populate (struct mm_struct *mm,pmd_t *pmdp, -pgtable_t pte_page) -{ - *pmdp =__pmd ((unsigned long )lowmem_page_address (pte_page) | _PMD_PRESENT); -} - -#define pmd_pgtable (pmd) pmd_page(pmd) -#endif static inline pte_t *pte_alloc_one_kernel (struct mm_struct *mm,unsigned long address) {
arch/powerpc/include/asm/book3s/32/pgtable.h +0 -14
@@ -334,24 +334,10 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,#define __HAVE_ARCH_PTE_SAME#define pte_same (A ,B ) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) -/* -* Note that on Book E processors, the pmd contains the kernel virtual -* (lowmem) address of the pte page. The physical address is less useful -* because everything runs with translation enabled (even the TLB miss -* handler). On everything else the pmd contains the physical address -* of the pte page. -- paulus -*/ -#ifndef CONFIG_BOOKE #define pmd_page_vaddr (pmd) \ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))#define pmd_page (pmd) \ pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) -#else -#define pmd_page_vaddr (pmd) \ - ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) -#define pmd_page (pmd) \ - pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT)) -#endif /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k (address) pgd_offset(&init_mm, address)
Signature · 1 line
2.13.3
PATCH v6 18/20 powerpc/mm: Extend pte_fragment functionality to nohash/32
In reply to Christophe LeroyIn order to allow the 8xx to handle pte_fragments, this patch extends the use of pte_fragments to nohash/32 platforms.
--- arch/powerpc/include/asm/mmu_context.h | 2 +- arch/powerpc/include/asm/nohash/32/mmu-40x.h | 1 + arch/powerpc/include/asm/nohash/32/mmu-44x.h | 1 + arch/powerpc/include/asm/nohash/32/mmu-8xx.h | 1 + arch/powerpc/include/asm/nohash/32/mmu.h | 4 ++- arch/powerpc/include/asm/nohash/32/pgalloc.h | 52 +++++++++++++--------------- arch/powerpc/include/asm/nohash/32/pgtable.h | 11 ++++-- arch/powerpc/include/asm/nohash/mmu-book3e.h | 1 + arch/powerpc/mm/Makefile | 3 ++ arch/powerpc/mm/mmu_context_nohash.c | 14 ++++++++ 10 files changed, 57 insertions(+), 33 deletions(-)
arch/powerpc/include/asm/mmu_context.h +1 -1
@@ -223,7 +223,7 @@ static inline int arch_dup_mmap(struct mm_struct *oldmm,return 0 ; } -#ifndef CONFIG_PPC_BOOK3S_64 +#if defined(CONFIG_PPC_BOOK3E_64 ) || defined(CONFIG_PPC_BOOK3S_32 )static inline void arch_exit_mmap (struct mm_struct *mm) { }
arch/powerpc/include/asm/nohash/32/mmu-40x.h +1 -0
@@ -58,6 +58,7 @@ typedef struct {unsigned int id;unsigned int active;unsigned long vdso_base; + void *pte_frag; } mm_context_t;#endif /* !__ASSEMBLY__ */
arch/powerpc/include/asm/nohash/32/mmu-44x.h +1 -0
@@ -109,6 +109,7 @@ typedef struct {unsigned int id;unsigned int active;unsigned long vdso_base; + void *pte_frag; } mm_context_t;#endif /* !__ASSEMBLY__ */
arch/powerpc/include/asm/nohash/32/mmu-8xx.h +1 -0
@@ -179,6 +179,7 @@ typedef struct {unsigned int id;unsigned int active;unsigned long vdso_base; +void *pte_frag;#ifdef CONFIG_PPC_MM_SLICES u16 user_psize;/* page size index */ unsigned char low_slices_psize[SLICE_ARRAY_SIZE ];
arch/powerpc/include/asm/nohash/32/mmu.h +3 -1
@@ -2,6 +2,8 @@#ifndef _ASM_POWERPC_NOHASH_32_MMU_H_#define _ASM_POWERPC_NOHASH_32_MMU_H_ +#include <asm/page.h> +#if defined(CONFIG_40x)/* 40x-style software loaded TLB */ #include <asm/nohash/32/mmu-40x.h>
@@ -17,7 +19,7 @@#endif #ifndef __ASSEMBLY__ -typedef struct page *pgtable_t ; +typedef pte_t *pgtable_t ;#endif #endif /* _ASM_POWERPC_NOHASH_32_MMU_H_ */
arch/powerpc/include/asm/nohash/32/pgalloc.h +24 -28
108 lines not on this page · raw message
arch/powerpc/include/asm/nohash/32/pgtable.h +8 -3
@@ -20,6 +20,10 @@ extern int icache_44x_need_flush;#endif /* __ASSEMBLY__ */ #define PTE_INDEX_SIZE PTE_SHIFT +#define PTE_FRAG_NR 1 +#define PTE_FRAG_SIZE_SHIFT PAGE_SHIFT +#define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT) +#define PMD_INDEX_SIZE 0#define PUD_INDEX_SIZE 0#define PGD_INDEX_SIZE (32 - PGDIR_SHIFT)
@@ -339,12 +343,12 @@ static inline int pte_young(pte_t pte)*/ #ifndef CONFIG_BOOKE #define pmd_page_vaddr (pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + ((unsigned long)__va(pmd_val(pmd) & ~(PTE_TABLE_SIZE - 1)))#define pmd_page (pmd) \ pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)#else #define pmd_page_vaddr (pmd) \ - ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) + ((unsigned long)(pmd_val(pmd) & ~(PTE_TABLE_SIZE - 1)))#define pmd_page (pmd) \ pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))#endif
@@ -363,7 +367,8 @@ static inline int pte_young(pte_t pte) (pmd_bad (*(dir)) ?NULL : (pte_t *)pmd_page_vaddr (*(dir)) + \ pte_index(addr))#define pte_offset_map (dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir))) + pte_index(addr)) + ((pte_t *)(kmap_atomic(pmd_page(*(dir))) + \ + (pmd_page_vaddr(*(dir)) & ~PAGE_MASK)) + pte_index(addr))#define pte_unmap (pte) kunmap_atomic(pte)/*
arch/powerpc/include/asm/nohash/mmu-book3e.h +1 -0
@@ -230,6 +230,7 @@ typedef struct {unsigned int id;unsigned int active;unsigned long vdso_base; +void *pte_frag; } mm_context_t;/* Page size definitions, common between 32 and 64-bit
arch/powerpc/mm/Makefile +3 -0
@@ -18,6 +18,9 @@ obj-$(CONFIG_PPC_BOOK3E_64) += pgtable-book3e.o obj-$(CONFIG_PPC_BOOK3S_64) += pgtable-hash64.o hash_utils_64.o slb.o \ $(hash64-y) mmu_context_book3s64.o \ pgtable-book3s64.o pgtable-frag.o +ifndef CONFIG_PPC_BOOK3S_32 +obj-$(CONFIG_PPC32) += pgtable-frag.o +endif obj-$(CONFIG_PPC_RADIX_MMU) += pgtable-radix.o tlb-radix.o obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o mmu_context_hash32.o obj-$(CONFIG_PPC_STD_MMU) += tlb_hash$(BITS).o
arch/powerpc/mm/mmu_context_nohash.c +14 -0
@@ -51,6 +51,7 @@#include <asm/mmu_context.h> #include <asm/tlbflush.h> +#include <asm/pgalloc.h> #include "mmu_decl.h"
@@ -385,6 +386,7 @@ int init_new_context(struct task_struct *t, struct mm_struct *mm)#endif mm->context.id =MMU_NO_CONTEXT ; mm->context.active =0 ; + mm->context.pte_frag =NULL ;return 0 ; }
@@ -487,3 +489,15 @@ void __init mmu_context_init(void) nr_free_contexts =LAST_CONTEXT -FIRST_CONTEXT +1 ; } +#ifdef CONFIG_PPC32 +void arch_exit_mmap (struct mm_struct *mm) +{ +void *frag; + + frag = mm->context.pte_frag; +if (frag) +pte_frag_destroy (frag); + +return ; +} +#endif
Signature · 1 line
2.13.3
PATCH v6 19/20 powerpc/8xx: Remove PTE_ATOMIC_UPDATES
In reply to Christophe Leroycommit 1bc54c03117b9 ("powerpc: rework 4xx PTE access and TLB miss") introduced non atomic PTE updates and started the work of removing PTE updates in TLB miss handlers, but kept PTE_ATOMIC_UPDATES for the 8xx with the following comment:
/* Until my rework is finished, 8xx still needs atomic PTE updates */
commit fe11dc3f9628e ("powerpc/8xx: Update TLB asm so it behaves as linux mm expects") removed all PTE updates done in TLB miss handlers
Therefore, atomic PTE updates are not needed anymore for the 8xx
--- arch/powerpc/include/asm/nohash/32/pte-8xx.h | 3 --- 1 file changed, 3 deletions(-)
arch/powerpc/include/asm/nohash/32/pte-8xx.h +0 -3
@@ -65,9 +65,6 @@#define _PTE_NONE_MASK 0 -/* Until my rework is finished, 8xx still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 -#ifdef CONFIG_PPC_16K_PAGES #define _PAGE_PSIZE _PAGE_SPS#else
Signature · 1 line
2.13.3
PATCH v6 20/20 powerpc/mm: reintroduce 16K pages with HW assistance on 8xx
In reply to Christophe LeroyUsing this HW assistance implies some constraints on the page table structure:
- Regardless of the main page size used (4k or 16k), the level 1 table (PGD) contains 1024 entries and each PGD entry covers a 4Mbytes area which is managed by a level 2 table (PTE) containing also 1024 entries each describing a 4k page.
- 16k pages require 4 identifical entries in the L2 table
- 512k pages PTE have to be spread every 128 bytes in the L2 table
- 8M pages PTE are at the address pointed by the L1 entry and each 8M page require 2 identical entries in the PGD.
In order to use hardware assistance with 16K pages, this patch does the following modifications:
- Make PGD size independent of the main page size
- In 16k pages mode, redefine pte_t as a struct with 4 elements, and populate those 4 elements in __set_pte_at() and pte_update()
- Adapt the size of the hugepage tables.
--- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/nohash/32/pgtable.h | 18 +++++++++++++++++- arch/powerpc/include/asm/nohash/pgtable.h | 4 ++++ arch/powerpc/include/asm/pgtable-types.h | 4 ++++ 4 files changed, 26 insertions(+), 2 deletions(-)
arch/powerpc/Kconfig +1 -1
@@ -690,7 +690,7 @@ config PPC_4K_PAGES config PPC_16K_PAGES bool "16k page size" - depends on 44x + depends on 44x || PPC_8xx config PPC_64K_PAGES bool "64k page size"
arch/powerpc/include/asm/nohash/32/pgtable.h +17 -1
@@ -19,9 +19,15 @@ extern int icache_44x_need_flush;#endif /* __ASSEMBLY__ */ +#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES ) +#define PTE_INDEX_SIZE (PTE_SHIFT - 2) +#define PTE_FRAG_NR 4 +#define PTE_FRAG_SIZE_SHIFT 12 +#else #define PTE_INDEX_SIZE PTE_SHIFT#define PTE_FRAG_NR 1#define PTE_FRAG_SIZE_SHIFT PAGE_SHIFT +#endif #define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT)#define PMD_INDEX_SIZE 0
@@ -52,7 +58,11 @@ extern int icache_44x_need_flush;* -Matt */ /* PGDIR_SHIFT determines what a top-level page table entry can map */ +#ifdef CONFIG_PPC_8xx +#define PGDIR_SHIFT 22 +#else #define PGDIR_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#endif #define PGDIR_SIZE (1UL << PGDIR_SHIFT)#define PGDIR_MASK (~(PGDIR_SIZE-1))
@@ -236,7 +246,13 @@ static inline unsigned long pte_update(pte_t *p, : "cc" );#else /* PTE_ATOMIC_UPDATES */ unsigned long old =pte_val (*p); - *p =__pte ((old & ~clr) | set); +unsigned long new = (old & ~clr) | set; + +#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES ) + p->pte = p->pte1 = p->pte2 = p->pte3 = new; +#else + *p =__pte (new); +#endif #endif /* !PTE_ATOMIC_UPDATES */ #ifdef CONFIG_44x
arch/powerpc/include/asm/nohash/pgtable.h +4 -0
@@ -209,7 +209,11 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,/* Anything else just stores the PTE normally. That covers all 64-bit * cases, and 32-bit non-hash with 32-bit PTEs. */ +#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES ) + ptep->pte = ptep->pte1 = ptep->pte2 = ptep->pte3 =pte_val (pte); +#else *ptep = pte; +#endif /* * With hardware tablewalk, a sync is needed to ensure that
arch/powerpc/include/asm/pgtable-types.h +4 -0
@@ -3,7 +3,11 @@#define _ASM_POWERPC_PGTABLE_TYPES_H/* PTE level */ +#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES ) +typedef struct {pte_basic_t pte, pte1, pte2, pte3; }pte_t ; +#else typedef struct {pte_basic_t pte; }pte_t ; +#endif #define __pte (x) ((pte_t) { (x) })static inline pte_basic_t pte_val (pte_t x) {
Signature · 1 line
2.13.3