savagefb: Driver updates

1. Fallback to firmware EDID if chipset has no DDC/I2C support or if I2C probing failed

2. Add fb_blank hook

3. Fix savagefb_suspend/resume to enable driver to successfully suspend and resume from S3, memory or disk

---

savagefb-i2c.c    |   16 ++++--
savagefb.h        |   13 ++++-
savagefb_driver.c |  139 +++++++++++++++++++++++++++++++++++++++++++++++-------
3 files changed, 147 insertions(+), 21 deletions(-)

@@ -259,8 +259,9 @@ static u8 *savage_do_probe_i2c_edid(stru

	return buf;
}

-int savagefb_probe_i2c_connector(struct savagefb_par *par, u8 **out_edid) +int savagefb_probe_i2c_connector(struct fb_info *info, u8 **out_edid) {

+	struct savagefb_par *par = info->par;
	u8 *edid = NULL;
	int i;

@@ -270,12 +271,19 @@ int savagefb_probe_i2c_connector(struct

		if (edid)
			break;
	}

+
+ if (!edid) {
+ /* try to get from firmware */
+ edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ if (edid)
+ memcpy(edid, fb_firmware_edid(info->device),
+ EDID_LENGTH);
+ }
+

	if (out_edid)
		*out_edid = edid;

- if (!edid)
- return 1;

- return 0;
+ return (edid) ? 0 : 1;
}

MODULE_LICENSE("GPL");

@@ -60,6 +60,7 @@
 

#define S3_SAVAGE_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000))

+#define S3_MOBILE_TWISTER_SERIES(chip) ((chip==S3_TWISTER) || (chip == S3_PROSAVAGEDDR))

/* Chip tags. These are used to group the adapters into
* related families.
@@ -73,6 +74,8 @@ typedef enum {
S3_PROSAVAGE,
S3_SUPERSAVAGE,
S3_SAVAGE2000,
+ S3_PROSAVAGEDDR,
+ S3_TWISTER,
S3_LAST
} savage_chipset;

@@ -128,6 +131,10 @@ typedef enum {
#define BCI_CMD_SET_ROP(cmd, rop) ((cmd) |= ((rop & 0xFF) << 16))
#define BCI_CMD_SEND_COLOR 0x00008000

+#define DISP_CRT     1
+#define DISP_LCD     2
+#define DISP_DFP     3
+
struct xtimings {
	unsigned int Clock;
	unsigned int HDisplay;
@@ -166,6 +173,10 @@ struct savagefb_par {
	struct savagefb_i2c_chan chan;
	unsigned char   *edid;
	u32 pseudo_palette[16];
+	int pm_state;
+	int display_type;
+	int dvi;
+	int crtonly;
	int dacSpeedBpp;
	int maxClock;
	int minClock;
@@ -338,7 +349,7 @@ do {                       \
	} \
}

-extern int savagefb_probe_i2c_connector(struct savagefb_par *par, +extern int savagefb_probe_i2c_connector(struct fb_info *info,

					u8 **out_edid);

extern void savagefb_create_i2c_busses(struct fb_info *info); extern void savagefb_delete_i2c_busses(struct fb_info *info);

@@ -1400,6 +1400,58 @@ static int savagefb_pan_display (struct 

	return 0;
}

+static int savagefb_blank(int blank, struct fb_info *info) +{
+ struct savagefb_par *par = info->par;
+ u8 sr8 = 0, srd = 0;
+
+ if (par->display_type == DISP_CRT) {
+ vga_out8(0x3c4, 0x08);
+ sr8 = vga_in8(0x3c5);
+ sr8 |= 0x06;
+ vga_out8(0x3c5, sr8);
+ vga_out8(0x3c4, 0x0d);
+ srd = vga_in8(0x3c5);
+ srd &= 0x03;
+
+ switch (blank) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ srd |= 0x10;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ srd |= 0x40;
+ break;
+ case FB_BLANK_POWERDOWN:
+ srd |= 0x50;
+ break;
+ }
+
+ vga_out8(0x3c4, 0x0d);
+ vga_out8(0x3c5, srd);
+ }
+
+ if (par->display_type == DISP_LCD ||
+ par->display_type == DISP_DFP) {
+ switch(blank) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ vga_out8(0x3c4, 0x31); /* SR31 bit 4 - FP enable */
+ vga_out8(0x3c5, vga_in8(0x3c5) | 0x10);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ vga_out8(0x3c4, 0x31); /* SR31 bit 4 - FP enable */
+ vga_out8(0x3c5, vga_in8(0x3c5) & ~0x10);
+ break;
+ }
+ }
+
+ return (blank == FB_BLANK_NORMAL) ? 1 : 0;
+}

static struct fb_ops savagefb_ops = {
.owner = THIS_MODULE,
@@ -1407,6 +1459,7 @@ static struct fb_ops savagefb_ops = {
.fb_set_par = savagefb_set_par,
.fb_setcolreg = savagefb_setcolreg,
.fb_pan_display = savagefb_pan_display,
+ .fb_blank = savagefb_blank,
#if defined(CONFIG_FB_SAVAGE_ACCEL)
.fb_fillrect = savagefb_fillrect,
.fb_copyarea = savagefb_copyarea,
@@ -1583,8 +1636,7 @@ static int __devinit savage_init_hw (str

	static unsigned char RamSavage4[] =  { 2, 4, 8, 12, 16, 32, 64, 32 };
	static unsigned char RamSavageMX[] = { 2, 8, 4, 16, 8, 16, 4, 16 };
	static unsigned char RamSavageNB[] = { 0, 2, 4, 8, 16, 32, 2, 2 };

-
- int videoRam, videoRambytes;
+ int videoRam, videoRambytes, dvi;

	DBG("savage_init_hw");

@@ -1705,6 +1757,30 @@ static int __devinit savage_init_hw (str

	printk (KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n",
		par->MCLK);

+ /* check for DVI/flat panel */
+ dvi = 0;
+
+ if (par->chip == S3_SAVAGE4) {
+ unsigned char sr30 = 0x00;
+
+ vga_out8(0x3c4, 0x30);
+ /* clear bit 1 */
+ vga_out8(0x3c5, vga_in8(0x3c5) & ~0x02);
+ sr30 = vga_in8(0x3c5);
+ if (sr30 & 0x02 /*0x04 */) {
+ dvi = 1;
+ printk("savagefb: Digital Flat Panel Detected\n");
+ }
+ }
+
+ if (S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+ (S3_MOBILE_TWISTER_SERIES(par->chip) && !par->crtonly))
+ par->display_type = DISP_LCD;
+ else if (dvi || (par->chip == S3_SAVAGE4 && par->dvi))
+ par->display_type = DISP_DFP;
+ else
+ par->display_type = DISP_CRT;
+

	/* Check LCD panel parrmation */

	if (par->chip == S3_SAVAGE_MX) {
@@ -1759,7 +1835,8 @@ static int __devinit savage_init_hw (str
			par->SavagePanelWidth = panelX;
			par->SavagePanelHeight = panelY;

- }
+ } else

+			par->display_type = DISP_CRT;
	}

	savage_get_default_par (par);
@@ -1845,15 +1922,15 @@ static int __devinit savage_init_fb_info
		snprintf (info->fix.id, 16, "ProSavageKM");
		break;
	case FB_ACCEL_S3TWISTER_P:
-		par->chip = S3_PROSAVAGE;
+		par->chip = S3_TWISTER;
		snprintf (info->fix.id, 16, "TwisterP");
		break;
	case FB_ACCEL_S3TWISTER_K:
-		par->chip = S3_PROSAVAGE;
+		par->chip = S3_TWISTER;
		snprintf (info->fix.id, 16, "TwisterK");
		break;
	case FB_ACCEL_PROSAVAGE_DDR:
-		par->chip = S3_PROSAVAGE;
+		par->chip = S3_PROSAVAGEDDR;
		snprintf (info->fix.id, 16, "ProSavageDDR");
		break;
	case FB_ACCEL_PROSAVAGE_DDRK:
@@ -1959,7 +2036,8 @@ static int __devinit savagefb_probe (str
	INIT_LIST_HEAD(&info->modelist);
#if defined(CONFIG_FB_SAVAGE_I2C)
	savagefb_create_i2c_busses(info);
-	savagefb_probe_i2c_connector(par, &par->edid);
+	savagefb_probe_i2c_connector(info, &par->edid);
+	kfree(par->edid);
	fb_edid_to_monspecs(par->edid, &info->monspecs);
	fb_videomode_to_modelist(info->monspecs.modedb,
				 info->monspecs.modedb_len,

@@ -2111,13 +2189,30 @@ static int savagefb_suspend (struct pci_

	DBG("savagefb_suspend");

+
+ par->pm_state = state.event;
+
+ /*
+ * For PM_EVENT_FREEZE, do not power down so the console
+ * can remain active.
+ */
+ if (state.event == PM_EVENT_FREEZE) {
+ dev->dev.power.power_state = state;
+ return 0;
+ }
+

	acquire_console_sem();

- fb_set_suspend(info, pci_choose_state(dev, state));
- savage_disable_mmio(par);
- release_console_sem();
+ fb_set_suspend(info, 1);
+
+ if (info->fbops->fb_sync)
+ info->fbops->fb_sync(info);

+ savagefb_blank(FB_BLANK_POWERDOWN, info);
+ savage_disable_mmio(par);

+	pci_save_state(dev);
	pci_disable_device(dev);
	pci_set_power_state(dev, pci_choose_state(dev, state));

+ release_console_sem();

	return 0;
}
@@ -2127,22 +2222,34 @@ static int savagefb_resume (struct pci_d
	struct fb_info *info =
		(struct fb_info *)pci_get_drvdata(dev);
	struct savagefb_par *par = (struct savagefb_par *)info->par;

+ int cur_state = par->pm_state;

	DBG("savage_resume");

- pci_set_power_state(dev, 0);
- pci_restore_state(dev);
- if(pci_enable_device(dev))
- DBG("err");
+ par->pm_state = PM_EVENT_ON;

- SavagePrintRegs();
+ /*
+ * The adapter was not powered down coming back from a
+ * PM_EVENT_FREEZE.
+ */
+ if (cur_state == PM_EVENT_FREEZE) {
+ pci_set_power_state(dev, PCI_D0);
+ return 0;
+ }

	acquire_console_sem();

+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+
+ if(pci_enable_device(dev))
+ DBG("err");
+

+	pci_set_master(dev);
	savage_enable_mmio(par);
	savage_init_hw(par);
	savagefb_set_par (info);
-
+	savagefb_blank(FB_BLANK_UNBLANK, info);
	fb_set_suspend (info, 0);
	release_console_sem();

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf