Skip to contentSkip to conversation

scsi error "sense key: No Sense" with usb flash drive

DISCUSSION Carl-Daniel Hailfinger 1 participant 1 message Sep 7, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

upon insertion of my new 2048 MB usb flash drive, the kernel (vanilla 2.6.13) spat out the following errors:

usb 4-2: new high speed USB device using ehci_hcd and address 7 scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
Vendor: TinyDisk Model: 2005-08-04 Rev: 0.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 4096000 512-byte hdwr sectors (2097 MB)
sda: Write Protect is on
sda: Mode Sense: 0b 00 80 00
sda: assuming drive cache: write through
ioctl_internal_command: <1 0 0 0> return code = 8000002
: Current: sense key: No Sense
Additional sense: No additional sense information
SCSI device sda: 4096000 512-byte hdwr sectors (2097 MB)
sda: Write Protect is on
sda: Mode Sense: 0b 00 80 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
ioctl_internal_command: <1 0 0 0> return code = 8000002
: Current: sense key: No Sense
Additional sense: No additional sense information
ioctl_internal_command: <1 0 0 0> return code = 8000002
: Current: sense key: No Sense
Additional sense: No additional sense information
ioctl_internal_command: <1 0 0 0> return code = 8000002
: Current: sense key: No Sense
Additional sense: No additional sense information
ioctl_internal_command: <1 0 0 0> return code = 8000002
: Current: sense key: No Sense
Additional sense: No additional sense information

This error only happens with this specific flash drive. p35:~ # lsusb -v

Bus 004 Device 007: ID 0457:0151 Silicon Integrated Systems Corp. Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0457 Silicon Integrated Systems Corp.
  idProduct          0x0151
  bcdDevice            1.00
  iManufacturer           0
  iProduct                2 USB Mass Storage Device
  iSerial                 3 0000000000000F
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 bytes 512 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 bytes 512 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 bytes 64 once
bInterval 8

Is this just a quirky usb flash drive or do the errors indicate a bigger problem?

Regards,
Carl-Daniel

Signature · 1 line
http://www.hailfinger.org/