Skip to contentSkip to conversation

em64t speedstep technology not supported in kernel yet?

DISCUSSION Richard Wohlstadter 2 participants 2 messages Sep 29, 2005

lore
Share & tools
lore
#0 lore raw

Hello all,

We recently had Intel give our company a roadmap presentation where they told us that their enhanced speedstep technology was supported by linux kernels 2.6.9+. I have since tried to get cpufreq speedstep driver to work with no luck on our em64t Xeon 3.6g processors. Intel even has a webpage describing the technology and how to get it working at url: http://www.intel.com/cd/ids/developer/asmo-na/eng/195910.htm?prn=Y

I made a bugzilla report to redhat [Bug 169290] and got a reply that none of the Xeon's were supported yet on speedstep because they cannot find documentation detailing the tables of frequencies these CPUs support.

The only processor I have had luck with so far is a 32-bit Xeon with the p4-clockmod driver(which does not appear to be present in the x86-64 kernel).

Anyone have any knowledge regarding cpufreq and when the em64t's are going have a linux driver supporting the speedstep technology? If it is an issue of Intel not providing the neccessary info, maybe I can press the issue with the gentlemen that came to my office and stated support was there already.

Thanks for any info and advice. Please CC my on any replies since I am not on the list.

Rich Wohlstadter
Genome Sequencing Center
Washington Univ. of St. Louis

#1 lore raw
Quoted 3 lines · Richard Wohlstadter

Hello all,

We recently had Intel give our company a roadmap presentation where they told us that their enhanced speedstep technology was supported by linux kernels 2.6.9+. I have since tried to get cpufreq speedstep driver to work with no luck on our em64t Xeon 3.6g processors. Intel even has a webpage describing the technology and how to get it working at url: http://www.intel.com/cd/ids/developer/asmo-na/eng/195910.htm?prn=Y

I think this is a BIOS problem; the BIOS needs to provide the proper ACPI frequency/voltage tables for cpufreq to use. You might want to harass your system/motherboard vendor.

Alternately maybe you can find someone who can give you the secret table and then you can just hardcode it into the driver.

Quoted 1 line

The only processor I have had luck with so far is a 32-bit Xeon with the p4-clockmod driver(which does not appear to be present in the x86-64 kernel).

Beware that p4-clockmod won't increase the power efficiency of your system. (As an aside, clock modulation is so simple that you can do it from userspace in a few lines of C if you modprobe msr. This works on x86-64.)

Wes Felter - [email protected]