Skip to contentSkip to conversation

Error in "15.10 Example of full nat solution with QoS"?

LARTC Sean Dwyer 2 participants 3 messages Oct 6, 2005 – Oct 9, 2005

lore
Share & tools
lore

Sean Dwyer

author
#0 lore raw

Near the end of section 15.10, the following commands are shown for prioritizing SYN packets:

   iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x1
   iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN

Shouldn't the "-I" option really be "-A"? Like so:

   iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x1
   iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN

Won't using "-I" cause these entries to be inserted at the top of the chain, putting the RETURN before the MARK is set? Maybe I'm missing something.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

author
#1 lore raw
Quoted 5 lines · Sean Dwyer

Near the end of section 15.10, the following commands are shown for prioritizing SYN packets:

  iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x1
  iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN
Quoted 7 lines

Shouldn't the "-I" option really be "-A"? Like so:

  iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x1
  iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN

Won't using "-I" cause these entries to be inserted at the top of the chain, putting the RETURN before the MARK is set? Maybe I'm missing something.

Does anybody who maintains lartc.org read this mailing list?

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to Sean Dwyer
Quoted 9 lines · Sean Dwyer
Quoted 7 lines · Sean Dwyer

Near the end of section 15.10, the following commands are shown for prioritizing SYN packets:

iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x1 iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN

Shouldn't the "-I" option really be "-A"? Like so:

Quoted 8 lines
Quoted 5 lines

iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x1 iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN

Won't using "-I" cause these entries to be inserted at the top of the chain, putting the RETURN before the MARK is set? Maybe I'm missing something.

Does anybody who maintains lartc.org read this mailing list?

I doubt if Bert reads every or maybe any post - I agree about the -I being wrong. The LARTC hasn't been changed for a while but will be someday I guess. There is going to be a wiki soon - there is already a new one for Linux-net http://linux-net.osdl.org/ .

Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc