Cannot pvmove, Insufficient suitable contiguous allocatable extents
Hi,
I have been using LVM2 for a while now and I am very pleased with it. However, I have currently run into a srtange limitation that I do not understand. I have a vg named 'data' and I would like to migrate the data off of one of its partitions. Unfortunately the pvmove command will not let me, despite the fact that I have plenty of free extents. When I run pvmove, I get:
pvmove /dev/hdc3
Insufficient suitable contiguous allocatable extents
for logical volume pvmove0: 6250 more required
Unable to allocate temporary LV for pvmove.
The pvdisplay for /dev/hdc3 gives:
--- Physical volume ---
PV Name /dev/hdc3 VG Name data PV Size 33.30 GB / not usable 0 Allocatable yes PE Size (KByte) 4096 Total PE 8526 Free PE 484 Allocated PE 8042
PV UUID
AheuvH-YyXp-83Hl-23JI-y7Kc-eTXt-rMLEm5
Only 8042 allocated PEs, tet, the vgdisplay data gives:
--- Volume group ---
VG Name data
System ID
Format lvm2 Metadata Areas 9 Metadata Sequence No 80 VG Access read/write VG Status resizable MAX LV 0 Cur LV 26 Open LV 22 Max PV 0 Cur PV 9 Act PV 9 VG Size 71.46 GB PE Size 4.00 MB Total PE 18293 Alloc PE / Size 9061 / 35.39 GB Free PE / Size 9232 / 36.06 GB
VG UUID
XLN0qj-39pm-RhwL-Ragk-KJoP-UZ0R-OWDSmA
As you can see, there are at least 9232 free extents, more
than the 8042 allocated PEs from /dev/hdc3.
And a lvdisplay shows that all my logical volumes have:
Allocation inherit
So, why is it looking for contiguous PEs? What does the inherit signify (I know it is not contiguous, but it hardly seems like the opposite?)
How can I get the data off of my /dev/hdc3 partition?
Thanks for any insights,
-Martin
____________________________________________________________________________________
Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com