Skip to contentSkip to conversation

dracut: Make mkinintrd-dracut.sh SUSE mkinitrd compatible

PATCH In review Thomas Renninger 2 participants 10 messages Sep 27, 2013 – Oct 4, 2013 3 messages not in the archive

lore
Share & tools
lore
#0 lore raw

Hi,

these patches implement most important SuSE specific /sbin/mkinitrd paramters:
<none> : Before gives a "usage" error -> now scans /boot for kernels
and builds corresponding inirtrds for them
-i -k : Pass a list of kernels and initrd targets
(not sure it was worth the hassle to be able to pass)
-b : Boot directory to search for kernel images
-d : Change root file system. Not tested whether dracut's behavior
matches exactly what our mkinitrd does.

If any of these parameters (including <none>) would have been called before, mkinitrd-dracut.sh would have bailed out with a "usage error" and an error code.
Or the other way around: Any valid mkinitrd-dracut.sh not resulting in an error, should work exactly the same way it did before.

Therefore I hope these can get in if the code is ok.

Thanks,

Thomas

[PATCH 1/6] mkinitrd-dracut.sh: Introduce -i -k parameters [PATCH 2/6] mkinitrd-dracut.sh: Enhance param parsing: Allow [PATCH 3/6] mkinitrd-dracut.sh: Implement --quiet|-q option [PATCH 4/6] mkinitrd-dracut.sh: Allow mkinitrd call without passing [PATCH 5/6] mkinitrd-dracut.sh: Also allow -d to specify the root_fs [PATCH 6/6] mkinitrd-dracut.sh: Build host images for

A message that is not in the archive (sent off-list or not yet received): 1380305940-64410-1-git-send-email-trenn-l3A5Bk7waGM@public.gmane.org

#2 lore raw

PATCH 1/6 mkinitrd-dracut.sh: Introduce -i -k parameters

In SUSE, one can pass a list of kernel files via -k parameter. For each an initrd is generated as passed via -i parameters.

Make the dracut mkinitrd wrapper compatible to those. For now only one kernel file and initrd target can be specified. This will get enhanced with a follow-up patch.

---
 mkinitrd-dracut.sh |   50 +++++++++++++++++++++++++++++++++++++++++---------
 1 files changed, 41 insertions(+), 9 deletions(-)
 mode change 100644 => 100755 mkinitrd-dracut.sh
mkinitrd-dracut.sh +41 -9
old mode 100644
new mode 100755
index ffea2d1..ace7725
@@ -1,6 +1,8 @@
 #!/bin/bash --norc
 kver=$(uname -r)
 
+boot_dir="/boot"
+
 error() { echo "$@" >&2; }
 
 usage () {
@@ -80,10 +82,27 @@ while (($# > 0)); do
         --looppath*) ;;
         --dsdt*) ;;
         --bootchart) ;;
-        *) if [[ ! $target ]]; then
-            target=$1
-            elif [[ ! $kernel ]]; then
-            kernel=$1
+	-b) read_arg boot_dir "$@" || shift
+	    if [ ! -d $boot_dir ];then
+		error "Boot directory $boot_dir does not exist"
+		exit 1
+	    fi
+	    ;;
+	-k) # Would be nice to get a list of images here
+	    read_arg kernel_images "$@" || shift
+	    for kernel_image in $kernel_images;do
+		kernels="$kernels ${kernel_image#*-}"
+	    done
+	    ;;
+	-i) read_arg initrd_images "$@" || shift
+	    for initrd_image in $initrd_images;do
+		targets="$targets $boot_dir/$initrd_images"
+	    done
+	    ;;
+        *) if [[ ! $targets ]]; then
+            targets=$1
+            elif [[ ! $kernels ]]; then
+            kernels=$1
             else
             usage
             fi;;
@@ -91,11 +110,24 @@ while (($# > 0)); do
     shift
 done
 
-[[ $target && $kernel ]] || usage
-[[ $img_vers ]] && target="$target-$kernel"
+[[ $targets && $kernels ]] || usage
+
+# We can have several targets/kernels, transform the list to an array
+targets=( $targets )
+[[ $kernels ]] && kernels=( $kernels )
 
-if [[ $basicmodules ]]; then
+for ((i=0 ; $i<${#targets[@]} ; i++)); do
+
+    if [[ $img_vers ]];then
+	target="${targets[$i]}-${kernels[$i]}"
+    else
+	target="${targets[$i]}"
+    fi
+    kernel="${kernels[$i]}"
+
+    if [[ $basicmodules ]]; then
         dracut $dracut_args --add-drivers "$basicmodules" "$target" "$kernel"
-else
+    else
         dracut $dracut_args "$target" "$kernel"
-fi
+    fi
+done
Signature · 1 line
1.7.6.1
#3 lore raw

PATCH 2/6 mkinitrd-dracut.sh: Enhance param parsing: Allow multiple arguments per param

In reply to a message not in the archive

Currently --with parameter had to be passed as: --with="mod1 mod2". Now one can pass: --with "mod1 mod2" or even --with mod1 mod2.

---
 mkinitrd-dracut.sh |   43 +++++++++++++++++++++++++------------------
 1 files changed, 25 insertions(+), 18 deletions(-)
mkinitrd-dracut.sh +25 -18
index ace7725..d8e92f3 100755
@@ -26,36 +26,43 @@ read_arg() {
     # $1 = arg name
     # $2 = arg value
     # $3 = arg parameter
-    local rematch='^[^=]*=(.*)$'
+    param="$1"
+    local rematch='^[^=]*=(.*)$' result
     if [[ $2 =~ $rematch ]]; then
-        read "$1" <<< "${BASH_REMATCH[1]}"
-    elif [[ $3 != -* ]]; then
-        # Only read next arg if it not an arg itself.
-        read "$1" <<< "$3"
-        # There is no way to shift our callers args, so
-        # return 1 to indicate they should do it instead.
-        return 1
+        read "$param" <<< "${BASH_REMATCH[1]}"
+    else
+	for ((i=3; $i <= $#; i++)); do
+            # Only read next arg if it not an arg itself.
+            if [[ ${@:$i:1} = -* ]];then
+		break
+            fi
+            result="$result ${@:$i:1}"
+            # There is no way to shift our callers args, so
+            # return "no of args" to indicate they should do it instead.
+	done
+	read "$1" <<< "$result"
+        return $(($i - 3))
     fi
 }
 
 while (($# > 0)); do
     case ${1%%=*} in
-        --with-usb) read_arg usbmodule "$@" || shift
+        --with-usb) read_arg usbmodule "$@" || shift $?
             basicmodules="$basicmodules ${usbmodule:-usb-storage}"
             unset usbmodule;;
-        --with-avail) read_arg modname "$@" || shift
+        --with-avail) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
-        --with) read_arg modname "$@" || shift
+        --with) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --version)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
         -v|--verbose) dracut_args="${dracut_args} -v";;
         -f|--force) dracut_args="${dracut_args} -f";;
-        --preload) read_arg modname "$@" || shift
+        --preload) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --image-version) img_vers=yes;;
-        --rootfs) read_arg rootfs "$@" || shift
+        --rootfs) read_arg rootfs "$@" || shift $?
             dracut_args="${dracut_args} --filesystems $rootfs";;
         --nocompress) dracut_args="$dracut_args --no-compress";;
         --help) usage -n;;
@@ -82,24 +89,24 @@ while (($# > 0)); do
         --looppath*) ;;
         --dsdt*) ;;
         --bootchart) ;;
-	-b) read_arg boot_dir "$@" || shift
+	-b) read_arg boot_dir "$@" || shift $?
 	    if [ ! -d $boot_dir ];then
 		error "Boot directory $boot_dir does not exist"
 		exit 1
 	    fi
 	    ;;
 	-k) # Would be nice to get a list of images here
-	    read_arg kernel_images "$@" || shift
+	    read_arg kernel_images "$@" || shift $?
 	    for kernel_image in $kernel_images;do
 		kernels="$kernels ${kernel_image#*-}"
 	    done
 	    ;;
-	-i) read_arg initrd_images "$@" || shift
+	-i) read_arg initrd_images "$@" || shift $?
 	    for initrd_image in $initrd_images;do
-		targets="$targets $boot_dir/$initrd_images"
+		targets="$targets $boot_dir/$initrd_image"
 	    done
 	    ;;
-        *) if [[ ! $targets ]]; then
+        *)  if [[ ! $targets ]]; then
             targets=$1
             elif [[ ! $kernels ]]; then
             kernels=$1
Signature · 1 line
1.7.6.1
#4 lore raw

PATCH 3/6 mkinitrd-dracut.sh: Implement --quiet|-q option

In reply to a message not in the archive

Dracut is rather verbose. This optional parameter is to limit the output to the essential: For each generated initrd show the kernel, target and possibly additional options passed to dracut.

---
 mkinitrd-dracut.sh |   21 ++++++++++++++++++---
 1 files changed, 18 insertions(+), 3 deletions(-)
mkinitrd-dracut.sh +18 -3
index d8e92f3..803abc0 100755
@@ -2,6 +2,7 @@
 kver=$(uname -r)
 
 boot_dir="/boot"
+quiet=0
 
 error() { echo "$@" >&2; }
 
@@ -89,6 +90,7 @@ while (($# > 0)); do
         --looppath*) ;;
         --dsdt*) ;;
         --bootchart) ;;
+	--quiet|-q) quiet=1;;
 	-b) read_arg boot_dir "$@" || shift $?
 	    if [ ! -d $boot_dir ];then
 		error "Boot directory $boot_dir does not exist"
@@ -123,6 +125,7 @@ done
 targets=( $targets )
 [[ $kernels ]] && kernels=( $kernels )
 
+echo "Creating: target|kernel|dracut args|basicmodules "
 for ((i=0 ; $i<${#targets[@]} ; i++)); do
 
     if [[ $img_vers ]];then
@@ -132,9 +135,21 @@ for ((i=0 ; $i<${#targets[@]} ; i++)); do
     fi
     kernel="${kernels[$i]}"
 
-    if [[ $basicmodules ]]; then
-        dracut $dracut_args --add-drivers "$basicmodules" "$target" "$kernel"
+    # Duplicate code: No way found how to redirect output based on $quiet
+    if [[ $quiet == 1 ]];then
+	echo "$target|$kernel|$dracut_args|$basicmodules"
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel" &>/dev/null
+	else
+            dracut $dracut_args "$target" "$kernel" &>/dev/null
+	fi
     else
-        dracut $dracut_args "$target" "$kernel"
+	if [[ $basicmodules ]]; then
+            dracut $dracut_args --add-drivers "$basicmodules" "$target" \
+		"$kernel"
+	else
+            dracut $dracut_args "$target" "$kernel"
+	fi
     fi
 done
Signature · 1 line
1.7.6.1
#5 lore raw

PATCH 4/6 mkinitrd-dracut.sh: Allow mkinitrd call without passing any parameters

In reply to a message not in the archive

Before this gave a "usage" error.
Now boot_dir (by default /boot) is scanned for available kernels and sane initrd default targets get defined and the corresponding initramfs files are generated.

---
 mkinitrd-dracut.sh |   64 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 63 insertions(+), 1 deletions(-)
mkinitrd-dracut.sh +63 -1
index 803abc0..eeb6dda 100755
@@ -46,6 +46,67 @@ read_arg() {
     fi
 }
 
+# Taken over from SUSE mkinitrd
+default_kernel_images() {
+    local regex kernel_image kernel_version version_version initrd_image
+    local qf='%{NAME}-%{VERSION}-%{RELEASE}\n'
+
+    case "$(uname -m)" in
+        s390|s390x)
+            regex='image'
+            ;;
+        ppc|ppc64)
+            regex='vmlinux'
+            ;;
+        i386|x86_64)
+            regex='vmlinuz'
+            ;;
+        arm*)
+            regex='[uz]Image'
+            ;;
+        aarch64)
+            regex='Image'
+            ;;
+        *)  regex='vmlinu.'
+            ;;
+    esac
+
+    # user mode linux                                                              
+    if grep -q UML /proc/cpuinfo; then
+            regex='linux'
+    fi
+
+    kernel_images=""
+    initrd_images=""
+    for kernel_image in $(ls $boot_dir \
+            | sed -ne "\|^$regex\(-[0-9.]\+-[0-9]\+-[a-z0-9]\+$\)\?|p" \
+            | grep -v kdump$ ) ; do
+
+        # Note that we cannot check the RPM database here -- this
+        # script is itself called from within the binary kernel
+        # packages, and rpm does not allow recursive calls.
+
+        [ -L "$boot_dir/$kernel_image" ] && continue
+        [ "${kernel_image%%.gz}" != "$kernel_image" ] && continue
+        kernel_version=$(/usr/bin/get_kernel_version \
+                         $boot_dir/$kernel_image 2> /dev/null)
+        initrd_image=$(echo $kernel_image | sed -e "s|${regex}|initrd|")
+        if [ "$kernel_image" != "$initrd_image" -a \
+             -n "$kernel_version" -a \
+             -d "/lib/modules/$kernel_version" ]; then
+                kernel_images="$kernel_images $boot_dir/$kernel_image"
+                initrd_images="$initrd_images $boot_dir/$initrd_image"
+        fi
+    done
+    for kernel_image in $kernel_images;do
+	kernels="$kernels ${kernel_image#*-}"
+    done
+    for initrd_image in $initrd_images;do
+	targets="$targets $initrd_image"
+    done
+
+}
+
 while (($# > 0)); do
     case ${1%%=*} in
         --with-usb) read_arg usbmodule "$@" || shift $?
@@ -119,7 +180,8 @@ while (($# > 0)); do
     shift
 done
 
-[[ $targets && $kernels ]] || usage
+[[ $targets && $kernels ]] || default_kernel_images
+[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage)
 
 # We can have several targets/kernels, transform the list to an array
 targets=( $targets )
Signature · 1 line
1.7.6.1
#6 lore raw

PATCH 5/6 mkinitrd-dracut.sh: Also allow -d to specify the root_fs and -s dummy

In reply to a message not in the archive

-d is the SUSE mkinitrd version option to pass the rootfs.
-s is to enable splash which may not be needed, but some callers rely on it, not to return an error.

Make this wrapper compatible to it.

---
 mkinitrd-dracut.sh |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
mkinitrd-dracut.sh +2 -1
index eeb6dda..f7b53f1 100755
@@ -124,7 +124,7 @@ while (($# > 0)); do
         --preload) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --image-version) img_vers=yes;;
-        --rootfs) read_arg rootfs "$@" || shift $?
+        --rootfs|-d) read_arg rootfs "$@" || shift $?
             dracut_args="${dracut_args} --filesystems $rootfs";;
         --nocompress) dracut_args="$dracut_args --no-compress";;
         --help) usage -n;;
@@ -151,6 +151,7 @@ while (($# > 0)); do
         --looppath*) ;;
         --dsdt*) ;;
         --bootchart) ;;
+	-s) ;;
 	--quiet|-q) quiet=1;;
 	-b) read_arg boot_dir "$@" || shift $?
 	    if [ ! -d $boot_dir ];then
Signature · 1 line
1.7.6.1
#7 lore raw

PATCH 6/6 mkinitrd-dracut.sh: Build host images for default_kernel_images and -i/-k paths

In reply to a message not in the archive

default_kernel_images and -i/-k paths are new (SuSE) code paths and would have resulted in usage errors before.

There we want to build host only images for faster building and smaller images.
Also force creation (overriding) of initrd images in these code paths.

---
 mkinitrd-dracut.sh |   14 +++++++++++---
 1 files changed, 11 insertions(+), 3 deletions(-)
mkinitrd-dracut.sh +11 -3
index f7b53f1..a1519ea 100755
@@ -3,6 +3,8 @@ kver=$(uname -r)
 
 boot_dir="/boot"
 quiet=0
+host_only=0
+force=0
 
 error() { echo "$@" >&2; }
 
@@ -104,7 +106,8 @@ default_kernel_images() {
     for initrd_image in $initrd_images;do
 	targets="$targets $initrd_image"
     done
-
+    host_only=1
+    force=1
 }
 
 while (($# > 0)); do
@@ -119,8 +122,8 @@ while (($# > 0)); do
         --version)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
-        -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
+        -v|--verbose) dracut_args="${dracut_args} -v --keep";;
+        -f|--force) force=1;;
         --preload) read_arg modname "$@" || shift $?
             basicmodules="$basicmodules $modname";;
         --image-version) img_vers=yes;;
@@ -164,6 +167,8 @@ while (($# > 0)); do
 	    for kernel_image in $kernel_images;do
 		kernels="$kernels ${kernel_image#*-}"
 	    done
+	    host_only=1
+	    force=1
 	    ;;
 	-i) read_arg initrd_images "$@" || shift $?
 	    for initrd_image in $initrd_images;do
@@ -188,6 +193,9 @@ done
 targets=( $targets )
 [[ $kernels ]] && kernels=( $kernels )
 
+[[ $host_only == 1 ]] && dracut_args="${dracut_args} -H"
+[[ $force == 1 ]]     && dracut_args="${dracut_args} -f"
+
 echo "Creating: target|kernel|dracut args|basicmodules "
 for ((i=0 ; $i<${#targets[@]} ; i++)); do
 
Signature · 1 line
1.7.6.1

A message that is not in the archive (sent off-list or not yet received): 1380305940-64410-7-git-send-email-trenn-l3A5Bk7waGM@public.gmane.org

#9 lore raw

Re: [PATCH 6/6] mkinitrd-dracut.sh: Build host images for default_kernel_images and -i/-k paths

Quoted 36 lines · Thomas Renninger

default_kernel_images and -i/-k paths are new (SuSE) code paths and would have resulted in usage errors before.

There we want to build host only images for faster building and smaller images.
Also force creation (overriding) of initrd images in these code paths.

---
 mkinitrd-dracut.sh |   14 +++++++++++---
 1 files changed, 11 insertions(+), 3 deletions(-)
mkinitrd-dracut.sh +4 -1
index f7b53f1..a1519ea 100755
@@ -3,6 +3,8 @@ kver=$(uname -r)
 
 boot_dir="/boot"
 quiet=0
+host_only=0
+force=0
 
 error() { echo "$@" >&2; }
 
@@ -104,7 +106,8 @@ default_kernel_images() {
     for initrd_image in $initrd_images;do
 	targets="$targets $initrd_image"
     done
-
+    host_only=1
+    force=1
 }
 
 while (($# > 0)); do

mkinitrd-dracut.sh while (($# > 0)); do · line 125

Quoted 6 lines
mkinitrd-dracut.sh +1 -2
@@ -119,8 +122,8 @@ while (($# > 0)); do
         --version)
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
-        -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
+        -v|--verbose) dracut_args="${dracut_args} -v --keep";;

do you really want to keep the entire files in /var/tmp/<tmpdir> for --verbose?

A message that is not in the archive (sent off-list or not yet received): [email protected]

#11 lore raw

Re: [PATCH 6/6] mkinitrd-dracut.sh: Build host images for default_kernel_images and -i/-k paths

Quoted 1 line · Harald Hoyer

On 09/27/2013 08:19 PM, Thomas Renninger wrote:

...

Quoted 7 lines
Quoted 7 lines
mkinitrd-dracut.sh +0 -0
@@ -119,8 +122,8 @@ while (($# > 0)); do
 
         --version)
 
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
 
Quoted 6 lines

mkinitrd-dracut.sh while (($# > 0)); do · line 125

Quoted 3 lines
mkinitrd-dracut.sh +1 -2
-        -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
+        -v|--verbose) dracut_args="${dracut_args} -v --keep";;

do you really want to keep the entire files in /var/tmp/<tmpdir> for --verbose?

No, that was not intended.
What about the rest? If it is ok, I would re-post this series.

Thanks,

Thomas

#12 lore raw

Re: [PATCH 6/6] mkinitrd-dracut.sh: Build host images for default_kernel_images and -i/-k paths

Quoted 16 lines · Thomas Renninger
Quoted 1 line · Harald Hoyer

On 09/27/2013 08:19 PM, Thomas Renninger wrote:

...

Quoted 7 lines
Quoted 7 lines
mkinitrd-dracut.sh +0 -0
@@ -119,8 +122,8 @@ while (($# > 0)); do
 
         --version)
 
             echo "mkinitrd: dracut compatibility wrapper"
             exit 0;;
 
Quoted 6 lines

mkinitrd-dracut.sh while (($# > 0)); do · line 125

Quoted 3 lines
mkinitrd-dracut.sh +1 -2
-        -v|--verbose) dracut_args="${dracut_args} -v";;
-        -f|--force) dracut_args="${dracut_args} -f";;
+        -v|--verbose) dracut_args="${dracut_args} -v --keep";;

do you really want to keep the entire files in /var/tmp/<tmpdir> for --verbose?

Quoted 6 lines

No, that was not intended.
What about the rest? If it is ok, I would re-post this series.

Thanks,

Thomas

Pushed all + removed the "--keep"