Skip to contentSkip to conversation

LSI LOGIC I/O Error on 2.6.12.6

DISCUSSION Robert Hancock 1 participant 1 message Oct 30, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 10 lines · govind

Hi,

We are trying to make use of a LSI LOGICS SAS drives in a customized Linux distribution of 2.6.12.6 kernel version. We are hitting upon an I/O Error on trying to access the drives. Have anybody faced this problem?

The following are the details:
sdb: Current: sense key=0x3

    ASC=0x11 ASCQ=0x0
Quoted 8 lines

end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
SCSI error : <1 0 8 0> return code = 0x8000002
sdb: Current: sense key=0x3

    ASC=0x11 ASCQ=0x0

end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table

Sense 0x3, ASC 0x11, ASCQ 0x00 seems to be "Unrecovered Read Error". Are you sure that drive for sdb is not faulty?

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/