Skip to contentSkip to conversation

Help: Device protect error

U-Boot-Users Zhen Wang 2 participants 2 messages Nov 9, 2005 – Nov 10, 2005

lore
Share & tools
lore

Zhen Wang

author
#0 lore raw

Hi wd,

I wrote in my last post:
I found that I misunderstood the abbreviation 'cfi' as 'Compact Flash
Interface' after I checked out cfi_flash.c. I will try to drive my flash memory with it tonight. Thanks a lot.
And sorry for sent it to the list in HTML format, so I decide to use
this gmail email account instead.
Now I can erase the 28F320C3B correctly with cfi_flash.c included.
Thank you very much.
I meant to boot a compressed uClinux zImage with u-boot. And I saw
someone else had succeeded in booting zImage by configuring bootcmd as 'tftpboot\; go 0x0c480000', but I wonder how to configure the tftp download file name i.e. zImage and tftp download address i.e. 0x0c480000(SDRAM address).
Any hints would be appreciated.

Best regards,
Zhen Wang

#1 lore raw
Quoted 5 lines · In message <[email protected]> you wrote:

'tftpboot\; go 0x0c480000', but I wonder how to configure the tftp download file name i.e. zImage and tftp download address i.e. 0x0c480000(SDRAM address).
Any hints would be appreciated.

I suggest you start reading the manual?

Best regards,

Wolfgang Denk

Signature · 6 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
In any group of employed individuals the only naturally  early  riser
is  _always_  the office manager, who will _always_ leave reproachful
little notes ... on the desks of their subordinates.
                                - Terry Pratchett, _Lords and Ladies_