ide: failed opcode errors, thousands of them, 2.6.13-15
This is using a SUSE Linux 10.0 build. I installed a new DVD burner, and now get 1 error per second in
the kernel ring buffer:
Nov 13 23:31:18 linux kernel: hdc: packet command error: status=0x51 {
DriveReady SeekComplete Error }
Nov 13 23:31:18 linux kernel: hdc: packet command error: error=0x54 {
AbortedCommand LastFailedSense=0x05 }
Nov 13 23:31:18 linux kernel: ide: failed opcode was: unknown
Nov 13 23:31:19 linux udevd[2297]: get_netlink_msg: no ACTION in payload
found, skip event 'mount'
Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: RRIP_1991A
Nov 13 23:31:19 linux kernel: hdc: packet command error: status=0x51 {
DriveReady SeekComplete Error }
Nov 13 23:31:19 linux kernel: hdc: packet command error: error=0x54 {
AbortedCommand LastFailedSense=0x05 }
Nov 13 23:31:19 linux kernel: ide: failed opcode was: unknown
Nov 13 23:31:20 linux kernel: hdc: packet command error: status=0x51 {
DriveReady SeekComplete Error }
Nov 13 23:31:20 linux kernel: hdc: packet command error: error=0x54 {
AbortedCommand LastFailedSense=0x05 }
Nov 13 23:31:20 linux kernel: ide: failed opcode was: unknownThis is similar to report:
http://lkml.org/lkml/2005/9/21/300 DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15
Like the first reporter, I also have a LITEON SOHW-1693S DVD burner. Curiously enough mine works fine (burns and reads DVD's just fine). DMA on or DMA off makes no difference.
Note the HDIO_GETGEO error below.
Is there anything else I can probe to help track down this issue?
linux:/home/bryce # lspci
...
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
linux:/home/bryce # hdparm /dev/hdc/dev/hdc:
IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
linux:/home/bryce # hdparm -iI /dev/hdc
/dev/hdc:
Model=LITE-ON DVDRW SOHW-1693S, FwRev=KS0B, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no
Drive conforms to: device does not report version:
* signifies the current active mode
ATAPI CD-ROM, with removable media
Model Number: LITE-ON DVDRW SOHW-1693S
Serial Number:
Firmware Revision: KS0B
Standards:
Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
Supported: CD-ROM ATAPI-2
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(cannot be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=227ns IORDY flow control=120ns
linux:/home/bryce # uname -a
Linux linux 2.6.13-15-default #1 Tue Sep 13 14:56:15 UTC 2005 i686 athlon i386 GNU/Linux
Quoted 29 lines · Bryce Nesbitt
This is using a SUSE Linux 10.0 build. I installed a new DVD burner, and now get 1 error per second in
the kernel ring buffer:Nov 13 23:31:18 linux kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } Nov 13 23:31:18 linux kernel: hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } Nov 13 23:31:18 linux kernel: ide: failed opcode was: unknown Nov 13 23:31:19 linux udevd[2297]: get_netlink_msg: no ACTION in payload found, skip event 'mount' Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: RRIP_1991A Nov 13 23:31:19 linux kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } Nov 13 23:31:19 linux kernel: hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } Nov 13 23:31:19 linux kernel: ide: failed opcode was: unknown Nov 13 23:31:20 linux kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } Nov 13 23:31:20 linux kernel: hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } Nov 13 23:31:20 linux kernel: ide: failed opcode was: unknownThis is similar to report:
http://lkml.org/lkml/2005/9/21/300 DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15
Quoted 5 lines
Like the first reporter, I also have a LITEON SOHW-1693S DVD burner. Curiously enough mine works fine (burns and reads DVD's just fine). DMA on or DMA off makes no difference.
Note theHDIO_GETGEOerror below.
Is there anything else I can probe to help track down this issue?
Try latest _vanilla_ kernel (2.6.15-rc1), if it still doesn't work please fill the bug on http://bugme.osdl.org.
Quoted 54 lines
linux:/home/bryce # lspci
...
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)linux:/home/bryce # hdparm
/dev/hdc/dev/hdc:IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off)readahead = 256 (on)
HDIO_GETGEOfailed: Invalid argumentlinux:/home/bryce # hdparm -iI
/dev/hdc
/dev/hdc:Model=LITE-ON DVDRW SOHW-1693S, FwRev=KS0B, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no
Drive conforms to: device does not report version:* signifies the current active mode
ATAPI CD-ROM, with removable media
Model Number: LITE-ON DVDRW SOHW-1693S
Serial Number:
Firmware Revision: KS0B
Standards:
Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
Supported: CD-ROM ATAPI-2
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(cannot be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=227ns IORDY flow control=120nslinux:/home/bryce # uname -a
Linux linux 2.6.13-15-default #1 Tue Sep 13 14:56:15 UTC 2005 i686 athlon i386 GNU/Linux
Quoted 25 lines · Bartlomiej Zolnierkiewicz
Quoted 24 lines · Bryce Nesbitt
This is using a SUSE Linux 10.0 build. I installed a new DVD burner, and now get 1 error per second in
the kernel ring buffer:Nov 13 23:31:18 linux kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } Nov 13 23:31:18 linux kernel: hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } Nov 13 23:31:18 linux kernel: ide: failed opcode was: unknown Nov 13 23:31:19 linux udevd[2297]: get_netlink_msg: no ACTION in payload found, skip event 'mount' Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: RRIP_1991A Nov 13 23:31:19 linux kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } Nov 13 23:31:19 linux kernel: hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } Nov 13 23:31:19 linux kernel: ide: failed opcode was: unknown Nov 13 23:31:20 linux kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } Nov 13 23:31:20 linux kernel: hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } Nov 13 23:31:20 linux kernel: ide: failed opcode was: unknown
Quoted 3 lines
Quoted 3 lines
This is similar to report:
http://lkml.org/lkml/2005/9/21/300 DMA broken in mainline 2.6.13.2 _AND_ opensuse vendor 2.6.13-15
This bug is confirmed to be fixed in 2.6.14 by the original reported.
Quoted 8 lines
Quoted 5 lines
Like the first reporter, I also have a LITEON SOHW-1693S DVD burner. Curiously enough mine works fine (burns and reads DVD's just fine). DMA on or DMA off makes no difference.
Note theHDIO_GETGEOerror below.
Is there anything else I can probe to help track down this issue?Try latest _vanilla_ kernel (2.6.15-rc1), if it still doesn't work please fill the bug on http://bugme.osdl.org.