automated hardware testing
Hi,
I just noticed this [1] and there are rumors that in the next release hardware testing will also work with yocto-autobuilder.
I do have a couple of boards deployer in my lab and build with autobuilder images for them.
The consoles of my boards are connected via conservers to ethernet and I can also remotely switch on/off power.
For the beagle bone white the setup is more complex in order to press the reset button remotely and turn on/off the power over the USB cable remotely.
My goal would be to build something with autobuilder, deploy to a board and run some tests.
Is this feasible with my current infrastructure? Can someone please guide me in the right directions.
Regards,
Robert
[1]
http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto-bsp/lib/oeqa/controllers/beaglebonetarget.py...I
read the system requirements label on a software package recently. It said "requires Windows NT or better". So I installed Unix. -- from a FAQ
My public pgp key is available,at:
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x90320BF1
Hi Robert,
Quoted 13 lines · On Wednesday 09 July 2014 12:33:15 Robert Berger wrote:
I just noticed this [1] and there are rumors that in the next release hardware testing will also work with yocto-autobuilder.
I do have a couple of boards deployer in my lab and build with autobuilder images for them.
The consoles of my boards are connected via conservers to ethernet and I can also remotely switch on/off power.
For the beagle bone white the setup is more complex in order to press the reset button remotely and turn on/off the power over the USB cable remotely.
Quoted 5 lines
My goal would be to build something with autobuilder, deploy to a board and run some tests.
Is this feasible with my current infrastructure? Can someone please guide me in the right directions.
Absolutely. As a starting point I'd recommend the following section of the manual:
Some of the capabilities in this area were added after 1.6, i.e. they are only in master.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Hi,
Quoted 5 lines · Paul Eggleton
Absolutely. As a starting point I'd recommend the following section of the manual:
Thanks!
Quoted 3 lines
Some of the capabilities in this area were added after 1.6, i.e. they are only in master.
I use a pretty recent yocto-autobuilder, but I guess I will need to update poky as well. Right?
Quoted 3 lines
Cheers,
Paul
Regards,
Robert
Quoted 6 lines · On Sunday 03 August 2014 11:41:50 [email protected] wrote:
Quoted 2 lines · Paul Eggleton
Some of the capabilities in this area were added after 1.6, i.e. they are only in master.
I use a pretty recent yocto-autobuilder, but I guess I will need to update poky as well. Right?
That is correct, yes. In fact this functionality is implemented within the build system rather than the autobuilder.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Hello Robert,
Sorry for the late reply, I missed this mail.
We do have an almost fully automated way of doing what you need. First of all, how do you want to run the automated tests? From the autobuilder as a build step OR from another machine (this will imply publishing the images on a http server).
To give you more info to chew on, what you have to do is http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#performing-automated-runtime-testing . The TEST_TARGET would have to be set to BeagleBoneTarget and other fields like TEST_SERIALCONTROL_CMD will also have to be set.
Regards,
Corneliu
Quoted 47 lines
-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Robert Berger
Sent: Wednesday, July 09, 2014 12:33 PM
To: [email protected]
Subject: [yocto] automated hardware testingHi,
I just noticed this [1] and there are rumors that in the next release hardware testing will also work with yocto-autobuilder.
I do have a couple of boards deployer in my lab and build with autobuilder images for them.
The consoles of my boards are connected via conservers to ethernet and I can also remotely switch on/off power.
For the beagle bone white the setup is more complex in order to press the reset button remotely and turn on/off the power over the USB cable remotely.
My goal would be to build something with autobuilder, deploy to a board and run some tests.
Is this feasible with my current infrastructure? Can someone please guide me in the right directions.
Regards,
Robert
[1]
http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto-
bsp/lib/oeqa/controllers/beaglebonetarget.py...I
read the system requirements label on a software package recently. It said "requires Windows NT or better". So I installed Unix. -- from a FAQMy public pgp key is available,at:
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x90320BF1--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi,
Quoted 8 lines · CorneliuX
Hello Robert,
Sorry for the late reply, I missed this mail.
We do have an almost fully automated way of doing what you need. First of all, how do you want to run the automated tests? From the autobuilder as a build step OR from another machine (this will imply publishing the images on a http server).
It's fine from the autobuilder as a build step.
Quoted 5 lines
To give you more info to chew on, what you have to do is
http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#performing-automated-runtime-testing
. TheTEST_TARGETwould have to be set to BeagleBoneTarget and other fields likeTEST_SERIALCONTROL_CMDwill also have to be set.
OK, Thanks!
I will be out of the office for the next couple of weeks which will give me time to read the "mega manual". What else would someone do on the beach;)
I'll certainly keep you updated about how things will go with autobuilder/auto hardware testing.
Quoted 4 lines
Regards,
Corneliu