Skip to contentSkip to conversation

PlugSched-6.1.5 for 2.6.14, 2.6.15-rc2 and 2.6.15-rc2-mm1

RFC Peter Williams 2 participants 5 messages Nov 24, 2005 – Dec 4, 2005

lore
Share & tools
lore
#0 lore raw

This version has a modified (hopefully improved) configuration mechanism.

A patch for 2.6.15-rc2-mm1 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc2-mm1.patch?download>

and a patch to upgrade the 6.1.4 versions for 2.6.14 and 2.6.15-rc2 to 6.1.5 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.4-to-6.1.5-for-2.6.15-rc2.patch?download>

Very Brief Documentation:

You can select a default scheduler at kernel build time. If you wish to boot with a scheduler other than the default it can be selected at boot time by adding:

cpusched=<scheduler>

to the boot command line where <scheduler> is one of: ingosched, nicksched, staircase, spa_no_frills, spa_ws, spa_svr or zaphod. If you don't change the default when you build the kernel the default scheduler will be ingosched (which is the normal scheduler).

The scheduler in force on a running system can be determined by the contents of:

/proc/scheduler

Control parameters for the scheduler can be read/set via files in:

/sys/cpusched/<scheduler>/

Peter

Signature · 4 lines
Peter Williams                                   [email protected]

"Learning, n. The kind of ignorance distinguishing the studious."
 -- Ambrose Bierce
#1 lore raw
Quoted 28 lines · Peter Williams

This version has a modified (hopefully improved) configuration mechanism.

A patch for 2.6.15-rc2-mm1 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc2-mm1.patch?download>

and a patch to upgrade the 6.1.4 versions for 2.6.14 and 2.6.15-rc2 to 6.1.5 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.4-to-6.1.5-for-2.6.15-rc2.patch?download>

Very Brief Documentation:

You can select a default scheduler at kernel build time. If you wish to boot with a scheduler other than the default it can be selected at boot time by adding:

cpusched=<scheduler>

to the boot command line where <scheduler> is one of: ingosched, nicksched, staircase, spa_no_frills, spa_ws, spa_svr or zaphod. If you don't change the default when you build the kernel the default scheduler will be ingosched (which is the normal scheduler).

The scheduler in force on a running system can be determined by the contents of:

Quoted 7 lines

/proc/scheduler

Control parameters for the scheduler can be read/set via files in:

/sys/cpusched/<scheduler>/

Peter

Patches for 2.6.15-rc3 available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc3.patch?download>

and 2.6.15-rc3-mm1 at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc3-mm1.patch?download>

Signature · 4 lines
Peter Williams                                   [email protected]

"Learning, n. The kind of ignorance distinguishing the studious."
 -- Ambrose Bierce
#2 lore raw
Quoted 34 lines · Peter Williams
Quoted 32 lines · Peter Williams

This version has a modified (hopefully improved) configuration mechanism.

A patch for 2.6.15-rc2-mm1 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc2-mm1.patch?download>

and a patch to upgrade the 6.1.4 versions for 2.6.14 and 2.6.15-rc2 to 6.1.5 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.4-to-6.1.5-for-2.6.15-rc2.patch?download>

Very Brief Documentation:

You can select a default scheduler at kernel build time. If you wish to boot with a scheduler other than the default it can be selected at boot time by adding:

cpusched=<scheduler>

to the boot command line where <scheduler> is one of: ingosched, nicksched, staircase, spa_no_frills, spa_ws, spa_svr or zaphod. If you don't change the default when you build the kernel the default scheduler will be ingosched (which is the normal scheduler).

The scheduler in force on a running system can be determined by the contents of:

/proc/scheduler

Control parameters for the scheduler can be read/set via files in:

Quoted 8 lines
Quoted 3 lines

/sys/cpusched/<scheduler>/

Peter

Patches for 2.6.15-rc3 available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc3.patch?download>

This patch will also successfully apply to 2.6.15-rc4.

Quoted 7 lines

and 2.6.15-rc3-mm1 at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc3-mm1.patch?download>

Signature · 4 lines
Peter Williams                                   [email protected]

"Learning, n. The kind of ignorance distinguishing the studious."
 -- Ambrose Bierce
#3 lore raw

Hi,

On 01/12/05, Peter Williams <[email protected]> wrote:
[snip]

Quoted 1 line

This patch will also successfully apply to 2.6.15-rc4.

here are my benchmarks:
http://stud.wsi.edu.pl/~piotrowskim/research/linux/plugsched/
(spa_ws, spa_svr and zaphod will be soon).

(athlon 2400 xp, 512 mb ram, 2.6.15-rc3-mm1)

I have some problems with interbench on that machine, ib stops on

ubuntu:/usr/src/tmp/interbench-0.29# ./interbench
loops_per_ms unknown; benchmarking...
.

All kernbench resoults should be +/- 02/12/2005 01:30 UTC.

Regards,
Michal Piotrowski

#4 lore raw
In reply to Peter Williams
Quoted 42 lines · Peter Williams
Quoted 40 lines · Peter Williams
Quoted 35 lines · Peter Williams

This version has a modified (hopefully improved) configuration mechanism.

A patch for 2.6.15-rc2-mm1 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc2-mm1.patch?download>

and a patch to upgrade the 6.1.4 versions for 2.6.14 and 2.6.15-rc2 to 6.1.5 is available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.4-to-6.1.5-for-2.6.15-rc2.patch?download>

Very Brief Documentation:

You can select a default scheduler at kernel build time. If you wish to boot with a scheduler other than the default it can be selected at boot time by adding:

cpusched=<scheduler>

to the boot command line where <scheduler> is one of: ingosched, nicksched, staircase, spa_no_frills, spa_ws, spa_svr or zaphod. If you don't change the default when you build the kernel the default scheduler will be ingosched (which is the normal scheduler).

The scheduler in force on a running system can be determined by the contents of:

/proc/scheduler

Control parameters for the scheduler can be read/set via files in:

/sys/cpusched/<scheduler>/

Peter

Quoted 7 lines
Quoted 3 lines

Patches for 2.6.15-rc3 available at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc3.patch?download>

This patch will also successfully apply to 2.6.15-rc4.

And 2.6.15-rc5.

Quoted 10 lines
Quoted 8 lines

and 2.6.15-rc3-mm1 at:

<http://prdownloads.sourceforge.net/cpuse/plugsched-6.1.5-for-2.6.15-rc3-mm1.patch?download>

Signature · 4 lines
Peter Williams                                   [email protected]

"Learning, n. The kind of ignorance distinguishing the studious."
 -- Ambrose Bierce