USB module crash
hi list,
last night (i think again) usb module(s) crashed. the running usb devices are a avm fritz usb dsl 2 and a usb mouse. i do not think this is avm related (cdslusb2 module), maybe an acpi/power management error?
please loook at the included stack trace.
can someone tell me (by looking at the trace), what could be the problem here?
hardware:
asus a8v deluxe (via k8t800 chipset) / socket 939 / amd64 3000+
cool and quiet was active in bios, but no module was loaded (powernow_k8), acpi/apic is enabled.
Nov 25 02:26:40 media kernel: [<c029b1ec>] kref_get+0x3c/0x40 Nov 25 02:26:40 media kernel: [<f89a2f9c>] usb_get_urb+0xc/0x10 [usbcore] Nov 25 02:26:40 media kernel: [<f89a212a>] hcd_submit_urb+0xda/0x1f0 [usbcore] Nov 25 02:26:40 media kernel: [<f89a31b6>] usb_submit_urb+0x216/0x3e0 [usbcore] Nov 25 02:26:40 media kernel: [<f89a31b6>] usb_submit_urb+0x216/0x3e0 [usbcore] Nov 25 02:26:40 media kernel: [<fa59e2cb>] LeaveCritical+0xb/0x10 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa60943e>] usb_write+0xee/0xf0 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa609494>] usb_read+0x54/0xa0 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa6095c1>] os_usb_submit_tx+0x61/0x80 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa609d65>] OSHWTxBuffer+0x65/0x80 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa5e7e00>] Block_TxHandler+0x0/0x10 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa5e7e71>] Block_TxSend+0x21/0x70 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa5e84cc>] Block_RxHandler+0x42c/0x500 [fcdslusb2] Nov 25 02:26:40 media kernel: [<fa609110>] rx_handler+0xc0/0xd0 [fcdslusb2] Nov 25 02:26:40 media kernel: [<c011b72a>] tasklet_action+0x3a/0x60 Nov 25 02:26:40 media kernel: [<c011b492>] __do_softirq+0x42/0x90 Nov 25 02:26:40 media kernel: [<c011b506>] do_softirq+0x26/0x30 Nov 25 02:26:40 media kernel: [<c0104a2e>] do_IRQ+0x1e/0x30 Nov 25 02:26:40 media kernel: [<c0103516>] common_interrupt+0x1a/0x20 Nov 25 02:26:40 media kernel: [<c02e1bf3>] acpi_processor_idle+0x0/0x27f Nov 25 02:26:40 media kernel: [<c02e1cf4>] acpi_processor_idle+0x101/0x27f Nov 25 02:26:40 media kernel: [<c0100ca2>] cpu_idle+0x42/0x60 Nov 25 02:26:40 media kernel: [<c04a281f>] start_kernel+0x16f/0x1b0 Nov 25 02:26:40 media kernel: [<c04a2380>] unknown_bootoption+0x0/0x1d0
greetings,
manuel.
Quoted 1 line · Manuel Hartl
fcdslusb2
where is that module from? I can't find it in the kernel source....
hi
Quoted 4 lines
Quoted 2 lines
fcdslusb2
where is that module from? I can't find it in the kernel source....
it isnt. it is from AVM.
ftp://ftp.avm.de/cardware/fritzcrd.dsl_usb/linux/suse.93/ (despite its name, it is usable for other distributions, too)
if its a very bad idea to ask for help for modules, that are not part of the kernel source, please tell me at least, what kind of error that is (if someone can...)
is it the modules fault? is it acpi related? ....
greets,
manuel.
Quoted 10 lines · Manuel Hartl
hi list,
last night (i think again) usb module(s) crashed. the running usb devices are a avm fritz usb dsl 2 and a usb mouse. i do not think this is avm related (cdslusb2 module), maybe an acpi/power management error?
please loook at the included stack trace.
can someone tell me (by looking at the trace), what could be the problem here?
Quoted 8 lines
hardware:
asus a8v deluxe (via k8t800 chipset) / socket 939 / amd64 3000+ cool and quiet was active in bios, but no module was loaded (powernow_k8), acpi/apic is enabled.Nov 25 02:26:40 media kernel: [<c029b1ec>] kref_get+0x3c/0x40
Are you _sure_ this is an oops, and not just a kernel warning?
Can you provide the whole message that the kernel spit out?
And if this is not for a driver that is in the kernel tree, it's a bit hard for us to help you out here, try asking the authors of the driver itself, as that is the code that is causing problems here.
good luck,
greg k-h