ARM: multi_v7_defconfig: Enable some drivers for LS1021A
Subsystems (2)
PATCH v2 1/1 ARM: multi_v7_defconfig: Enable some drivers for LS1021A
This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled.
---
Changes since v1:
- Make some drivers as loadable modules.
arch/arm/configs/multi_v7_defconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm/configs/multi_v7_defconfig +14 -0
@@ -128,6 +128,7 @@ CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_NEON=y
@@ -182,8 +183,11 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_FSL_QUADSPI=m CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y CONFIG_ATMEL_TCLIB=y
@@ -210,6 +214,7 @@ CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_GIANFAR=y CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y
@@ -226,6 +231,7 @@ CONFIG_MARVELL_PHY=y CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y CONFIG_MICREL_PHY=y CONFIG_FIXED_PHY=y CONFIG_USB_PEGASUS=y
@@ -312,6 +318,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_IMX=m CONFIG_I2C_MV64XXX=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y
@@ -330,6 +337,7 @@ CONFIG_SPI=y CONFIG_SPI_ATMEL=m CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y +CONFIG_SPI_FSL_DSPI=m CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y
@@ -405,6 +413,7 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y
@@ -525,6 +534,7 @@ CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=m CONFIG_SND_ATMEL_SOC=m CONFIG_SND_ATMEL_SOC_WM8904=m +CONFIG_SND_SOC_FSL_SAI=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_RSRC_CARD=m
@@ -537,6 +547,7 @@ CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y
@@ -577,6 +588,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_AT91=y +CONFIG_MMC_SDHCI_OF_ESDHC=m CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y
@@ -653,6 +665,7 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_FSL_EDMA=m CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SH_DMAE=y
@@ -712,6 +725,7 @@ CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_TCB=m +CONFIG_PWM_FSL_FTM=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m
Signature · 1 line
2.1.0.27.g96db324
PATCH v2 1/1 ARM: multi_v7_defconfig: Enable some drivers for LS1021A
Quoted 9 lines · On Wednesday 09 December 2015 16:41:39 Alison Wang wrote:
This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled.
Signed-off-by Alison Wang <[email protected]>---
Changes since v1:
- Make some drivers as loadable modules.
Shawn, do you want to pick this up and send it back through the imx tree?
If you have no other defconfig changes for 4.5, we can also just add it to arm-soc.
Arnd
PATCH v2 1/1 ARM: multi_v7_defconfig: Enable some drivers for LS1021A
Quoted 11 lines · Arnd Bergmann
Quoted 9 lines · On Wednesday 09 December 2015 16:41:39 Alison Wang wrote:
This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled.
Signed-off-by Alison Wang <[email protected]>---
Changes since v1:
- Make some drivers as loadable modules.
Quoted 7 lines
Acked-by Arnd Bergmann <[email protected]>Shawn, do you want to pick this up and send it back through the imx tree?
If you have no other defconfig changes for 4.5, we can also just add it to arm-soc.
Arnd,
I was told by Olof to stay away from multi_v7_defconfig as it's not i.MX specific. So please apply it directly to arm-soc.
Shawn
PATCH v2 1/1 ARM: multi_v7_defconfig: Enable some drivers for LS1021A
Quoted 17 lines · On Friday 11 December 2015 19:42:33 Shawn Guo wrote:
Quoted 16 lines · Arnd Bergmann
Quoted 9 lines · On Wednesday 09 December 2015 16:41:39 Alison Wang wrote:
This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled.
Signed-off-by Alison Wang <[email protected]>---
Changes since v1:
- Make some drivers as loadable modules.Acked-by Arnd Bergmann <[email protected]>Shawn, do you want to pick this up and send it back through the imx tree?
Quoted 7 lines
Quoted 2 lines
If you have no other defconfig changes for 4.5, we can also just add it to arm-soc.
Arnd,
I was told by Olof to stay away from
multi_v7_defconfigas it's not i.MX specific. So please apply it directly to arm-soc.
Ok, I should discuss this with Olof, as I've been giving the opposite advice in the past. ;-)
Arnd
Arnd Bergmann
AppliedPATCH v2 1/1 ARM: multi_v7_defconfig: Enable some drivers for LS1021A
In reply to Alison WangQuoted 6 lines · On Wednesday 09 December 2015 16:41:39 Alison Wang wrote:
This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled.
Signed-off-by Alison Wang <[email protected]>
Applied to next/defconfig, thanks!
Arnd