Skip to contentSkip to conversation

USB OHCI issue

U-Boot-Users Mohammed Amine SAYA 2 participants 2 messages Nov 29, 2005

lore
Share & tools
lore
#0 lore raw

Hi all,
I am trying to port usb_ohci code (u-boot-1.1.3 version) from cpu/arm920t/s3c24x0 to our chip.
I added low_level specific functions and It seems to work correctly with a low
speed device (mouse...).
Things get a little more compilcated when I use a disk-on-key. when I perform a : usb start

U-Boot> usb start
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
Device NOT ready
Request Sense returned 00 00 00
0 Storage Device(s) found

But when I perform a usb tree I get this :
U-Boot> usb tree

Device Tree:
1 Hub (12MBit/s, 0mA)
| OHCI Root Hub
|
+-2 Mass Storage (12MBit/s, 94mA)

       M-Sys DiskOnKey 2730C3409173AB63

or a usb info :

U-Boot> usb info
1: Hub, USB Revision 1.10
- OHCI Root Hub
- Class: Hub
- PacketSize: 8 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 0.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Settings 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms

2: Mass Storage, USB Revision 2.0
- M-Sys DiskOnKey 2730C3409173AB63
- Class: (from Interface) Mass Storage
- PacketSize: 64 Configurations: 1
- Vendor: 0x08ec Product 0x0012 Version 2.0
Configuration: 1
- Interfaces: 1 Bus Powered 94mA
Interface: 0
- Alternate Settings 0, Endpoints: 2
- Class Mass Storage, Transp. SCSI, Bulk only
- Endpoint 1 In Bulk MaxPacket 64
- Endpoint 2 Out Bulk MaxPacket 64

But when I perform a usb storage I get this :

U-Boot> usb storage
No storage devices, perhaps not 'usb start'ed..?

Do you know why all this mess around the disk-on-key ?

Do you know how to solve this ?

Should I try code from cvs instead of that of 1.1.3 version ?

Best regards,

Amine.

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

I am trying to port usb_ohci code (u-boot-1.1.3 version) from cpu/arm920t/s3c24x0 to our chip.

...

Quoted 1 line

Should I try code from cvs instead of that of 1.1.3 version ?

Yes, definitely.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Dealing with failure is easy: work hard to improve. Success  is  also
easy  to  handle:  you've  solved  the  wrong  problem.  Work hard to
improve.