split interleaved files in arecord when reaching 2GB
PATCH 1/1 split interleaved files in arecord when reaching 2GB
This patch will split files in chunks of aprox. 2GB in the interleaved recording mode of arecord. This is meant to overcome the 2GB filesize limit of .wav files, which is easily reached when recording multiple channels.
Signature · 3 lines
---> Dirk Jagdmann ^ doj / cubic ----> http://cubic.org/~doj -----> http://llg.cubic.org
aplay/aplay.c +110 -44
@@ -1981,33 +1981,6 @@snd_pcm_drain (handle); } -/* capturing raw data, this proc handels WAVE files and .VOCs (as one block) */ - -void capture_go (int fd,off64_t count,int rtype,char *name) -{ -size_t c; -off64_t cur; -ssize_t r, err; - -header (rtype, name); -set_params (); - -do { -for (cur = count; cur >0 ; cur -= r) { - c = (cur <= chunk_bytes) ? cur : chunk_bytes; - c = c *8 / bits_per_frame; -if ((size_t )(r =pcm_read (audiobuf, c)) != c) -break ; - r = r * bits_per_frame /8 ; -if ((err =write (fd, audiobuf, r)) != r) { -perror (name); -exit (EXIT_FAILURE ); - } -if (err >0 ) - fdcount += err; - } - }while (rtype ==FORMAT_RAW && !timelimit); -}/* * let's play or capture it (capture_type says VOC/WAVE/raw)
@@ -2068,20 +2041,16 @@close (fd); } -static void capture (char *name) +static void capture (char *name_) { - pbrec_count =LLONG_MAX ; -if (!name || !strcmp (name,"-" )) { - fd =fileno (stdout); - name ="stdout" ; - }else { -remove (name); -if ((fd =open64 (name,O_WRONLY |O_CREAT ,0644 )) ==-1 ) { -perror (name); -exit (EXIT_FAILURE ); - } - } - fdcount =0 ; +int tostdout=0 ;/* boolean which describes output stream */ +int filecount=0 ;/* number of files written */ +const unsigned wrthreshold=2000000000 ;/* threshold in bytes. If file becomes larger a new file is created */ +char *name=name_;/* current filename */ +char namebuf[PATH_MAX +1 ]; +off64_t cur;/* number of bytes to capture */ + +/* get number of bytes to capture */ pbrec_count =calc_count ();/* WAVE-file should be even (I'm not sure), but wasting one byte isn't a problem (this can only be in 8 bit mono) */
@@ -2091,10 +2060,107 @@ pbrec_count -= pbrec_count %2 ;if (pbrec_count ==0 ) pbrec_count -=2 ; -if (fmt_rec_table[file_type].start) - fmt_rec_table[file_type].start (fd, pbrec_count); -capture_go (fd, pbrec_count, file_type, name); - fmt_rec_table[file_type].end (fd); + + cur = pbrec_count; + +/* display verbose output to console */ +header (file_type, name); + +/* setup sound hardware */ +set_params (); + +/* write to stdout? */ +if (!name || !strcmp (name,"-" )) { + fd =fileno (stdout); + name ="stdout" ; + tostdout=1 ; + fdcount =0 ; + } + +do { +/* open a file to write */ +if (!tostdout) { + +/* upon the second file we start the numbering scheme */ +if (filecount) + { +/* get a copy of the original filename */ +char *s; +char buf[PATH_MAX +1 ]; +strncpy (buf, name_,sizeof (buf)); + +/* separate extension from filename */ + s=buf+strlen (buf); +while (s>buf && *s!='.' && *s!='/' ) + --s; +if (*s=='.' ) + *s++=0 ; +else if (*s=='/' ) + s=buf+strlen (buf); + +/* upon first jump to this if block rename the first file */ +if (filecount==1 ) { +if (*s) +snprintf (namebuf,sizeof (namebuf),"%s-01.%s" , buf, s); +else +snprintf (namebuf,sizeof (namebuf),"%s-01" , buf); +remove (namebuf); +rename (name, namebuf); + filecount=2 ; + } + +/* name of the current file */ +if (*s) +snprintf (namebuf,sizeof (namebuf),"%s-%02i.%s" , buf, filecount, s); +else +snprintf (namebuf,sizeof (namebuf),"%s-%02i" , buf, filecount); + name=namebuf; + + } + +/* open a new file */ +remove (name); +if ((fd =open64 (name,O_WRONLY |O_CREAT ,0644 )) ==-1 ) { +perror (name); +exit (EXIT_FAILURE ); + } + fdcount =0 ; + filecount++; + } + +/* setup sample header */ +if (fmt_rec_table[file_type].start) + fmt_rec_table[file_type].start (fd, pbrec_count); + +/* capture */ +do { +ssize_t r=0 ; +for (; cur >0 && fdcount<wrthreshold; cur -= r) { +ssize_t err; +size_t c = (cur <= chunk_bytes) ? cur : chunk_bytes; + c = c *8 / bits_per_frame; +if ((size_t )(r =pcm_read (audiobuf, c)) != c) +break ; + r = r * bits_per_frame /8 ; +if ((err =write (fd, audiobuf, r)) != r) { +perror (name); +exit (EXIT_FAILURE ); + } +if (err >0 ) + fdcount += err; + } +/* exit conditions: +1) format_raw and a timelimit +2) all requested samples/bytes have been captured (cur>0) +3) filesize threshold was reached (fdcount<wrthreshold) +*/ + }while (file_type ==FORMAT_RAW && !timelimit && cur>0 && fdcount<wrthreshold); + +/* finish sample container */ + fmt_rec_table[file_type].end (fd); + +/* repeat the loop when format is raw without timelimit or filesize threshold was reached */ + }while ((file_type ==FORMAT_RAW && !timelimit) || fdcount>=wrthreshold); }void playbackv_go (int * fds,unsigned int channels,size_t loaded,off64_t count,int rtype,char **names)
aplay/aplay.1 +2 -1
@@ -10,7 +10,8 @@ .SH DESCRIPTION \fBarecord\fP is a command-line soundfile recorder for the ALSA soundcard driver. It supports several file formats and multiple soundcards with -multiple devices. +multiple devices. If recording with interleaved mode samples the file is +automatically split before the 2GB filesize. \fBaplay\fP is much the same, only it plays instead of recording. For supported soundfile formats, the sampling rate, bit depth, and so
aplay/arecord.1 +2 -1
@@ -10,7 +10,8 @@ .SH DESCRIPTION \fBarecord\fP is a command-line soundfile recorder for the ALSA soundcard driver. It supports several file formats and multiple soundcards with -multiple devices. +multiple devices. If recording with interleaved mode samples the file is +automatically split before the 2GB filesize. \fBaplay\fP is much the same, only it plays instead of recording. For supported soundfile formats, the sampling rate, bit depth, and so
At Sat, 03 Dec 2005 12:00:49 +0100,
Quoted 5 lines · Dirk Jagdmann
This patch will split files in chunks of aprox. 2GB in the interleaved recording mode of arecord. This is meant to overcome the 2GB filesize limit of .wav files, which is easily reached when recording multiple channels.
It's a nice idea. But, I prefer this as an option. For example, there is no 2GB limit for the raw format. We can set this on automatically for WAV format, though...
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
Quoted 3 lines
It's a nice idea. But, I prefer this as an option. For example, there is no 2GB limit for the raw format. We can set this on automatically for WAV format, though...
You're right. it makes no sense to split raw and au files. I have modified my patch to work with the fileformat table fmt_rec_table my adding a variable max_filesize. File split is set to ~2GB for wav, ~16MB for voc and LLONG_MAX for au and raw (which should not be reached in practice).
Signature · 3 lines
---> Dirk Jagdmann ^ doj / cubic ----> http://cubic.org/~doj -----> http://llg.cubic.org
aplay/aplay.c +114 -48
@@ -124,11 +124,12 @@void (*start) (int fd,size_t count);void (*end) (int fd);char *what; +long long max_filesize; } fmt_rec_table[] = { - { NULL, end_raw, N_("raw data") }, - { begin_voc, end_voc, N_("VOC") }, - { begin_wave, end_wave, N_("WAVE") }, - { begin_au, end_au, N_("Sparc Audio")} + { NULL, end_raw, N_("raw data"), LLONG_MAX }, + { begin_voc, end_voc, N_("VOC"), 16000000 }, + { begin_wave, end_wave, N_("WAVE"), 2000000000 }, + { begin_au, end_au, N_("Sparc Audio"), LLONG_MAX } }; #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
@@ -1985,33 +1986,6 @@snd_pcm_drain (handle); } -/* capturing raw data, this proc handels WAVE files and .VOCs (as one block) */ - -void capture_go (int fd,off64_t count,int rtype,char *name) -{ -size_t c; -off64_t cur; -ssize_t r, err; - -header (rtype, name); -set_params (); - -do { -for (cur = count; cur >0 ; cur -= r) { - c = (cur <= chunk_bytes) ? cur : chunk_bytes; - c = c *8 / bits_per_frame; -if ((size_t )(r =pcm_read (audiobuf, c)) != c) -break ; - r = r * bits_per_frame /8 ; -if ((err =write (fd, audiobuf, r)) != r) { -perror (name); -exit (EXIT_FAILURE ); - } -if (err >0 ) - fdcount += err; - } - }while (rtype ==FORMAT_RAW && !timelimit); -}/* * let's play or capture it (capture_type says VOC/WAVE/raw)
@@ -2072,20 +2046,15 @@close (fd); } -static void capture (char *name) +static void capture (char *name_) { - pbrec_count =LLONG_MAX ; -if (!name || !strcmp (name,"-" )) { - fd =fileno (stdout); - name ="stdout" ; - }else { -remove (name); -if ((fd =open64 (name,O_WRONLY |O_CREAT ,0644 )) ==-1 ) { -perror (name); -exit (EXIT_FAILURE ); - } - } - fdcount =0 ; +int tostdout=0 ;/* boolean which describes output stream */ +int filecount=0 ;/* number of files written */ +char *name=name_;/* current filename */ +char namebuf[PATH_MAX +1 ]; +off64_t cur;/* number of bytes to capture */ + +/* get number of bytes to capture */ pbrec_count =calc_count ();/* WAVE-file should be even (I'm not sure), but wasting one byte isn't a problem (this can only be in 8 bit mono) */
@@ -2095,10 +2064,107 @@ pbrec_count -= pbrec_count %2 ;if (pbrec_count ==0 ) pbrec_count -=2 ; -if (fmt_rec_table[file_type].start) - fmt_rec_table[file_type].start (fd, pbrec_count); -capture_go (fd, pbrec_count, file_type, name); - fmt_rec_table[file_type].end (fd); + + cur = pbrec_count; + +/* display verbose output to console */ +header (file_type, name); + +/* setup sound hardware */ +set_params (); + +/* write to stdout? */ +if (!name || !strcmp (name,"-" )) { + fd =fileno (stdout); + name ="stdout" ; + tostdout=1 ; + fdcount =0 ; + } + +do { +/* open a file to write */ +if (!tostdout) { + +/* upon the second file we start the numbering scheme */ +if (filecount) + { +/* get a copy of the original filename */ +char *s; +char buf[PATH_MAX +1 ]; +strncpy (buf, name_,sizeof (buf)); + +/* separate extension from filename */ + s=buf+strlen (buf); +while (s>buf && *s!='.' && *s!='/' ) + --s; +if (*s=='.' ) + *s++=0 ; +else if (*s=='/' ) + s=buf+strlen (buf); + +/* upon first jump to this if block rename the first file */ +if (filecount==1 ) { +if (*s) +snprintf (namebuf,sizeof (namebuf),"%s-01.%s" , buf, s); +else +snprintf (namebuf,sizeof (namebuf),"%s-01" , buf); +remove (namebuf); +rename (name, namebuf); + filecount=2 ; + } + +/* name of the current file */ +if (*s) +snprintf (namebuf,sizeof (namebuf),"%s-%02i.%s" , buf, filecount, s); +else +snprintf (namebuf,sizeof (namebuf),"%s-%02i" , buf, filecount); + name=namebuf; + + } + +/* open a new file */ +remove (name); +if ((fd =open64 (name,O_WRONLY |O_CREAT ,0644 )) ==-1 ) { +perror (name); +exit (EXIT_FAILURE ); + } + fdcount =0 ; + filecount++; + } + +/* setup sample header */ +if (fmt_rec_table[file_type].start) + fmt_rec_table[file_type].start (fd, pbrec_count); + +/* capture */ +do { +ssize_t r=0 ; +for (; cur >0 && fdcount<fmt_rec_table[file_type].max_filesize; cur -= r) { +ssize_t err; +size_t c = (cur <= chunk_bytes) ? cur : chunk_bytes; + c = c *8 / bits_per_frame; +if ((size_t )(r =pcm_read (audiobuf, c)) != c) +break ; + r = r * bits_per_frame /8 ; +if ((err =write (fd, audiobuf, r)) != r) { +perror (name); +exit (EXIT_FAILURE ); + } +if (err >0 ) + fdcount += err; + } +/* exit conditions: +1) format_raw and a timelimit +2) all requested samples/bytes have been captured (cur>0) +3) filesize threshold was reached (fdcount<wrthreshold) +*/ + }while (file_type ==FORMAT_RAW && !timelimit && cur>0 && fdcount<fmt_rec_table[file_type].max_filesize); + +/* finish sample container */ + fmt_rec_table[file_type].end (fd); + +/* repeat the loop when format is raw without timelimit or filesize threshold was reached */ + }while ((file_type ==FORMAT_RAW && !timelimit) || fdcount>=fmt_rec_table[file_type].max_filesize); }void playbackv_go (int * fds,unsigned int channels,size_t loaded,off64_t count,int rtype,char **names)
aplay/aplay.1 +2 -1
@@ -10,7 +10,8 @@ .SH DESCRIPTION \fBarecord\fP is a command-line soundfile recorder for the ALSA soundcard driver. It supports several file formats and multiple soundcards with -multiple devices. +multiple devices. If recording with interleaved mode samples the file is +automatically split before the 2GB filesize. \fBaplay\fP is much the same, only it plays instead of recording. For supported soundfile formats, the sampling rate, bit depth, and so
aplay/arecord.1 +2 -1
@@ -10,7 +10,8 @@ .SH DESCRIPTION \fBarecord\fP is a command-line soundfile recorder for the ALSA soundcard driver. It supports several file formats and multiple soundcards with -multiple devices. +multiple devices. If recording with interleaved mode samples the file is +automatically split before the 2GB filesize. \fBaplay\fP is much the same, only it plays instead of recording. For supported soundfile formats, the sampling rate, bit depth, and so
At Tue, 06 Dec 2005 00:24:45 +0100,
Quoted 10 lines · Dirk Jagdmann
Quoted 4 lines
It's a nice idea. But, I prefer this as an option. For example, there is no 2GB limit for the raw format. We can set this on automatically for WAV format, though...
You're right. it makes no sense to split raw and au files. I have modified my patch to work with the fileformat table
fmt_rec_tablemy adding a variablemax_filesize. File split is set to ~2GB for wav, ~16MB for voc andLLONG_MAXfor au and raw (which should not be reached in practice).
Thanks. Applied to CVS.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click