SAL calling conventions + locking
The SAL specification does say that the SAL procedures should be called with interrupts enabled if we call them in virtual mode.
Here is the simplified CPEI handler control flow:
ia64_mca_cpe_int_handler():
/* SAL spec states this should run w/ interrupts enabled */ local_irq_enable(); ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE): ia64_log_get(): IA64_LOG_LOCK(): spin_lock_irqsave(): ia64_sal_get_state_info(); IA64_LOG_UNLOCK() salinfo_log_wakeup() if (rh->severity = sal_log_severity_corrected) ia64_sal_clear_state_info();
Despite the note "SAL spec ... w/ interrupts enabled" the interrupts are disabled before "ia64_sal_get_state_info()" is invoked.
Can someone please tell me:
- why the spec. requires to call the SAL with interrupts enabled,
- why Linux calls the SAL with interrupts disabled,
- what happens if the SAL is called with interrupts disabled?
The second issue is:
The lock of the log is released before "salinfo_log_wakeup()" could record the existence of the current log. Two more logs can arrive and overwrite the current log without even indicting the loss of the information. (E.g. CPEI-s with interrupt redirection, CMCI-s on multiple CPUs.) Should not we keep the log lock at least while "salinfo_log_wakeup()" executes?
Thanks.
Zoltan Menyhart
Quoted 4 lines
Can someone please tell me:
- why the spec. requires to call the SAL with interrupts enabled,
- why Linux calls the SAL with interrupts disabled,
- what happens if the SAL is called with interrupts disabled?
A quick scan of the SAL spec didn't come up with text to match that comment. On the contrary in chapter 8 on calling conventions table 8-2 on requirements for PSR says that the "i" bit is preserved across SAL calls (with a footnote "b" remarking that SAL procedures may not enable interrupts if they are disabled on entry). This appears to be very clear that the call can be made either with interrupts enabled or disabled.
Section 9.1.1 on invoking runtime services in virtual mode does say that "the normal operating system environment is with translation on and interrupts enabled but operating system may choose to call SAL runtime services in physical mode". This is perhaps a bit hazy, but I don't see that this should be interpreted as a requirement that interrupts be enabled when calling in virtual mode.
The SAL_GET_STATE_INFO only says that it is callable in either virtual or physical mode.
So I think that the comment is wrong, and the SAL spec does not require that this be called with interrupts enabled.
-Tony