power led flashing on omap5912
Quoted 2 lines · Tushar
i am using a omap5912 board. when i boot the kernel image, the power led starts flashing. can anyone tell if this behavior ok.
Yes, it is ok.
It shows you that kernel is basically alive and reached a dedicated boot stage. E.g. I2C works and TPS power chip is initialized correctly. This is controlled by drivers/i2c/chips/tps65010.c in tps_init()
/* Let LED1 (D9) blink */tps65010_set_led(LED1, BLINK);
Dirk