Skip to contentSkip to conversation

.config not updated after make clean

DISCUSSION Jan Beulich 2 participants 4 messages Dec 22, 2005 – Dec 26, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Sam,

since 'make clean' doesn't delete include/linux/autoconf.h (but obviously does delete .config.cmd), .config cannot get updated anymore if any of the Kconfig-s in the tree changes. Is there a particular reason that include/linux/autoconf.h only gets deleted by 'make mrproper', but not by 'make clean'? If that cannot be adjusted, I can't see how else to force proper re-generation of .config through the silentoldconfig target.

Thanks, Jan

#1 lore raw
Quoted 5 lines · Jan Beulich

Sam,

since 'make clean' doesn't delete include/linux/autoconf.h (but obviously does delete .config.cmd), .config cannot get updated anymore if any of the Kconfig-s in the tree changes.

Correct but thats unfortunate though.

Quoted 3 lines

Is there a particular
reason that include/linux/autoconf.h only gets deleted by 'make mrproper', but not by 'make clean'?

make clean is used to clean out all intermidiate files not needed for:
- building applications that users kernel headers directly
- building external modules

For the latter autoconf.h is needed in order to obtain the current kernel configuration.

Quoted 3 lines

If that cannot be adjusted, I can't
see how else to force proper re-generation of .config through the silentoldconfig target.

The current flow is something in the line of:

all Kconfig files => .config + include/linux/autoconf.h +.config.cmd include/linux/autoconf.h => include/config/* + include/config/MARKER

When we execute make clean we delete the .config.cmd file so we will not detect when a Kconfig file is changed - not good.

Since for reasons listed above we want to keep the autoconf.h around also after make clean a new approach is needed. We could keep the .config.cmd file but thats clearly not supposed to stay around after a make clean.

So I went for another solution and if .config.cmd - renamed to kconfig.dep - does not exists we execute make silentoldconfig

The reason for the rename is the clash with the normal kbuild .cmd file which caused it to have multiple targets if it was created.

Sam

Makefile +7 -5
index f4218b5..43ab980 100644
@@ -481,18 +481,20 @@ ifeq ($(dot-config),1)
 
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
--include .config.cmd
+-include .kconfig.dep
 
 include .config
 
 # If .config needs to be updated, it will be done via the dependency
 # that autoconf has on .config.
 # To avoid any implicit rule to kick in, define an empty command
-.config: ;
+.config .kconfig.dep: ;
 
 # If .config is newer than include/linux/autoconf.h, someone tinkered
-# with it and forgot to run make oldconfig
-include/linux/autoconf.h: .config
+# with it and forgot to run make oldconfig.
+# If kconfig.dep is missing then we are probarly in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/linux/autoconf.h: .kconfig.dep .config
 	$(Q)mkdir -p include/linux
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
@@ -981,7 +983,7 @@ endif # CONFIG_MODULES
 
 # Directories & files removed with 'make clean'
 CLEAN_DIRS  += $(MODVERDIR)
-CLEAN_FILES +=	vmlinux System.map \
+CLEAN_FILES +=	vmlinux System.map .kconfig.dep\
                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
 
 # Directories & files removed with 'make mrproper'
scripts/kconfig/util.c +1 -1
index 1fa4c0b..854d247 100644
@@ -33,7 +33,7 @@ int file_write_dep(const char *name)
 	FILE *out;
 
 	if (!name)
-		name = ".config.cmd";
+		name = ".kconfig.dep";
 	out = fopen("..config.tmp", "w");
 	if (!out)
 		return 1;
#2 lore raw

Looks better than any of the alternatives I had come to think of. Thanks, and assuming you're going to push this upwards... Jan

Quoted 1 line
Quoted 1 line
Quoted 1 line

Sam Ravnborg <[email protected]> 22.12.05 22:25:08 >>>

Quoted 4 lines · Jan Beulich

Sam,

since 'make clean' doesn't delete include/linux/autoconf.h (but obviously does delete .config.cmd), .config cannot get updated

anymore

Quoted 1 line

if any of the Kconfig-s in the tree changes.

Correct but thats unfortunate though.

Quoted 3 lines

Is there a particular
reason that include/linux/autoconf.h only gets deleted by 'make mrproper', but not by 'make clean'?

make clean is used to clean out all intermidiate files not needed for:
- building applications that users kernel headers directly
- building external modules

For the latter autoconf.h is needed in order to obtain the current kernel configuration.

Quoted 3 lines

If that cannot be adjusted, I can't
see how else to force proper re-generation of .config through the silentoldconfig target.

The current flow is something in the line of:

all Kconfig files => .config + include/linux/autoconf.h +.config.cmd include/linux/autoconf.h => include/config/* + include/config/MARKER

When we execute make clean we delete the .config.cmd file so we will not detect when a Kconfig file is changed - not good.

Since for reasons listed above we want to keep the autoconf.h around also after make clean a new approach is needed. We could keep the .config.cmd file but thats clearly not supposed to stay around after a make clean.

So I went for another solution and if .config.cmd - renamed to kconfig.dep - does not exists we execute make silentoldconfig

The reason for the rename is the clash with the normal kbuild .cmd file which caused it to have multiple targets if it was created.

Sam

Makefile +5 -4
index f4218b5..43ab980 100644
@@ -481,18 +481,20 @@ ifeq ($(dot-config),1)
 
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
--include .config.cmd
+-include .kconfig.dep
 
 include .config
 
 # If .config needs to be updated, it will be done via the dependency
 # that autoconf has on .config.
 # To avoid any implicit rule to kick in, define an empty command
-.config: ;
+.config .kconfig.dep: ;
 
 # If .config is newer than include/linux/autoconf.h, someone tinkered
-# with it and forgot to run make oldconfig
-include/linux/autoconf.h: .config
+# with it and forgot to run make oldconfig.
+# If kconfig.dep is missing then we are probarly in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig

files
+include/linux/autoconf.h: .kconfig.dep .config
$(Q)mkdir -p include/linux
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
@@ -981,7 +983,7 @@ endif # CONFIG_MODULES

# Directories & files removed with 'make clean' CLEAN_DIRS += $(MODVERDIR)
-CLEAN_FILES += vmlinux System.map \
+CLEAN_FILES += vmlinux System.map .kconfig.dep\
.tmp_kallsyms* .tmp_version .tmp_vmlinux*
.tmp_System.map

# Directories & files removed with 'make mrproper'

scripts/kconfig/util.c +1 -1
index 1fa4c0b..854d247 100644
@@ -33,7 +33,7 @@ int file_write_dep(const char *name)
 	FILE *out;
 
 	if (!name)
-		name = ".config.cmd";
+		name = ".kconfig.dep";
 	out = fopen("..config.tmp", "w");
 	if (!out)
 		return 1;
#3 lore raw
Quoted 1 line

Thanks, and assuming you're going to push this upwards... Jan

Hi Jan - just pushed atteched patch.
Slightly simplified compared to first version.

Sam

kbuild: always run 'make silentoldconfig' when tree is cleaned

If the file .kconfig.d is missing then make sure to run 'make silentoldconfig', since we have no way to detect if a Kconfig file has been updated.

-kconfig.d is created by kconfig and is removed as part of 'make clean' so the situation is likely to occur in reality.

Jan Beulich <[email protected]> reported this bug.

---
commit 752625cff3eba81cbc886988d5b420064c033948
tree 10281d9345281b3d118aa8b29b3fb21e1ea10655
parent 54e08a2392e99ba9e48ce1060e0b52a39118419c
author Sam Ravnborg <[email protected]> Mon, 26 Dec 2005 23:34:03 +0100 committer Sam Ravnborg <[email protected]> Mon, 26 Dec 2005 23:34:03 +0100

 Makefile               |   10 ++++++----
 scripts/kconfig/util.c |    2 +-
 2 files changed, 7 insertions(+), 5 deletions(-)
Makefile +6 -4
index 922c763..d3598ef 100644
@@ -477,18 +477,20 @@ ifeq ($(dot-config),1)
 
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
--include .config.cmd
+-include .kconfig.d
 
 include .config
 
 # If .config needs to be updated, it will be done via the dependency
 # that autoconf has on .config.
 # To avoid any implicit rule to kick in, define an empty command
-.config: ;
+.config .kconfig.d: ;
 
 # If .config is newer than include/linux/autoconf.h, someone tinkered
-# with it and forgot to run make oldconfig
-include/linux/autoconf.h: .config
+# with it and forgot to run make oldconfig.
+# If kconfig.d is missing then we are probarly in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/linux/autoconf.h: .kconfig.d .config
 	$(Q)mkdir -p include/linux
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
scripts/kconfig/util.c +1 -1
index 1fa4c0b..a711007 100644
@@ -33,7 +33,7 @@ int file_write_dep(const char *name)
 	FILE *out;
 
 	if (!name)
-		name = ".config.cmd";
+		name = ".kconfig.d";
 	out = fopen("..config.tmp", "w");
 	if (!out)
 		return 1;