palm & bluez

HCI Event: Command Complete (0x0e) plen 10

HCI Event: Disconn Complete (0x05) plen 4

I'm trying to pair my palm tungsten e2 with a 2.6.11-gentoo-r9 box. I currently use a bluetooth keyboard & mouse, so bluez is working on the gentoo box. I can discover the palm from linux..

myth1 ~ # hcitool scan
Scanning ...

        00:07:E0:71:37:54       vsailer

and the palm discovers the bluetooth dongle. On the palm I attempt to pair, typing in a passkey, which I then type on the gentoo box but back on the palm I get "Unable to add Myth1 BlueZ(0) to your trusted device list". hcidump gives me....

< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23

    bdaddr 00:07:E0:71:37:54 len 1 pin '1'

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

    PIN Code Request Reply (0x01|0x000d) ncmd 1
    status 0x00 bdaddr 00:07:E0:71:37:54

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 47 reason 0x13
Reason: Remote User Terminated Connection

I know it appears the problem is with the palm, but I'm not sure what else to try here. Didn't find much in the palm newsgroups.

Hi Dave,

Quoted 12 lines

I'm trying to pair my palm tungsten e2 with a 2.6.11-gentoo-r9 box. I currently use a bluetooth keyboard & mouse, so bluez is working on the gentoo box. I can discover the palm from linux..

myth1 ~ # hcitool scan
Scanning ...

       00:07:E0:71:37:54       vsailer

and the palm discovers the bluetooth dongle. On the palm I attempt to pair, typing in a passkey, which I then type on the gentoo box but back on the palm I get "Unable to add Myth1 BlueZ(0) to your trusted device list". hcidump gives me....

< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:07:E0:71:37:54 len 1 pin '1'

Quoted 10 lines

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:07:E0:71:37:54

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 47 reason 0x13
Reason: Remote User Terminated Connection

I know it appears the problem is with the palm, but I'm not sure what else to try here. Didn't find much in the palm newsgroups.

I have no idea, because as you correctly said, the Palm is at fault here (if your PIN code was '1' on both sides).

However don't try to pair at all. If an authentication is really needed you will asked for the PIN code at that time. Simply start to use your Palm.

Regards

Marcel

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Quoted 41 lines · Marcel Holtmann

Hi Dave,

Quoted 12 lines

I'm trying to pair my palm tungsten e2 with a 2.6.11-gentoo-r9 box. I currently use a bluetooth keyboard & mouse, so bluez is working on the gentoo box. I can discover the palm from linux..

myth1 ~ # hcitool scan
Scanning ...

       00:07:E0:71:37:54       vsailer

and the palm discovers the bluetooth dongle. On the palm I attempt to pair, typing in a passkey, which I then type on the gentoo box but back on the palm I get "Unable to add Myth1 BlueZ(0) to your trusted device list". hcidump gives me....

< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:07:E0:71:37:54 len 1 pin '1'

Quoted 9 lines

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:07:E0:71:37:54

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 47 reason 0x13
Reason: Remote User Terminated Connection

I know it appears the problem is with the palm, but I'm not sure what else to try here. Didn't find much in the palm newsgroups.

I have no idea, because as you correctly said, the Palm is at fault here (if your PIN code was '1' on both sides).

However don't try to pair at all. If an authentication is really needed you will asked for the PIN code at that time. Simply start to use your Palm.

Regards

Marcel

Quoted 12 lines

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

I'm just learning the palm, but it appears you need to set up the bluetooth connection in order to do anything with it. No matter anyway, now I can't even get the palm to see the dongle or the linux box to discover the palm. Arghhh! What have I done? (the palm still has bluetooth on and the device is discoverable).

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Quoted 59 lines · dave sailer

Quoted 42 lines · Marcel Holtmann

Hi Dave,

Quoted 12 lines

I'm trying to pair my palm tungsten e2 with a 2.6.11-gentoo-r9 box. I currently use a bluetooth keyboard & mouse, so bluez is working on the gentoo box. I can discover the palm from linux..

myth1 ~ # hcitool scan
Scanning ...

       00:07:E0:71:37:54       vsailer

and the palm discovers the bluetooth dongle. On the palm I attempt to pair, typing in a passkey, which I then type on the gentoo box but back on the palm I get "Unable to add Myth1 BlueZ(0) to your trusted device list". hcidump gives me....

< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:07:E0:71:37:54 len 1 pin '1'

Quoted 9 lines

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:07:E0:71:37:54

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 47 reason 0x13
Reason: Remote User Terminated Connection

I know it appears the problem is with the palm, but I'm not sure what else to try here. Didn't find much in the palm newsgroups.

I have no idea, because as you correctly said, the Palm is at fault here (if your PIN code was '1' on both sides).

However don't try to pair at all. If an authentication is really needed you will asked for the PIN code at that time. Simply start to use your Palm.

Regards

Marcel

Quoted 12 lines

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

I'm just learning the palm, but it appears you need to set up the bluetooth connection in order to do anything with it. No matter anyway, now I can't even get the palm to see the dongle or the linux box to discover the palm. Arghhh! What have I done? (the palm still has bluetooth on and the device is discoverable).

Quoted 10 lines

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

ok, after resetting (turning off/on did not do it) the palm, I'm back to where I was. The devices discover eachother but the connection is failing at the palm. As I said, it appears I need to get a "trusted device" established on the palm before continuing.

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Quoted 75 lines · dave sailer

Quoted 60 lines · dave sailer

Quoted 43 lines · Marcel Holtmann

Hi Dave,

Quoted 12 lines

I'm trying to pair my palm tungsten e2 with a 2.6.11-gentoo-r9 box. I currently use a bluetooth keyboard & mouse, so bluez is working on the gentoo box. I can discover the palm from linux..

myth1 ~ # hcitool scan
Scanning ...

       00:07:E0:71:37:54       vsailer

and the palm discovers the bluetooth dongle. On the palm I attempt to pair, typing in a passkey, which I then type on the gentoo box but back on the palm I get "Unable to add Myth1 BlueZ(0) to your trusted device list". hcidump gives me....

< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:07:E0:71:37:54 len 1 pin '1'

Quoted 9 lines

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:07:E0:71:37:54

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 47 reason 0x13
Reason: Remote User Terminated Connection

I know it appears the problem is with the palm, but I'm not sure what else to try here. Didn't find much in the palm newsgroups.

I have no idea, because as you correctly said, the Palm is at fault here (if your PIN code was '1' on both sides).

However don't try to pair at all. If an authentication is really needed you will asked for the PIN code at that time. Simply start to use your Palm.

Regards

Marcel

Quoted 12 lines

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

I'm just learning the palm, but it appears you need to set up the bluetooth connection in order to do anything with it. No matter anyway, now I can't even get the palm to see the dongle or the linux box to discover the palm. Arghhh! What have I done? (the palm still has bluetooth on and the device is discoverable).

Quoted 10 lines

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

ok, after resetting (turning off/on did not do it) the palm, I'm back to where I was. The devices discover eachother but the connection is failing at the palm. As I said, it appears I need to get a "trusted device" established on the palm before continuing.

Quoted 10 lines

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

I've tried this on both linux & windows xp with the same result. Is this problem related to "profiles" (http://www.bluetooth.com/help/trouble.asp). Seems likely since my dongle is for a microsoft keyboard & mouse. But surely "profiles" isn't a hardware issue, is it? How do I address this on the linux box?

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users