How can I expand a physical volume ?
Hi !
My first post here !
I've recently added a fourth Scsi Hard disk to my
Proliant ML350 configured as follow :
SmartArray Controller 641 with 3 72Gb Scsi h.disks.(raid5)
I installed on my Centos 4.2 the HP Array configuration Utility and did the following steps:
1) Expanded my array
2) Expanded my logical Volume
Everything ok . Now I can see 4 physical drives
and a new total space increased of 72gb(obviously..)
The problem is that the operating doesen't seem to recognize the new free space . Here is the output of various command I tried :
--LVDISPLAY
LV Name /dev/VolGroup00/LogVol00
VG Name VolGroup00
LV UUID 0QlVVm-W4ZY-tSLv-syu6-qS6J-b2u9-2Ed13l
LV Write Access read/write
LV Status available
# open 1 LV Size 133,56 GB Current LE 4274 Segments 1 Allocation inherit Read ahead sectors 0 Block device 253:0 ******************** FDISK -l Disk /dev/cciss/c0d0: 218.5 GB, 218501038080 bytes 255 heads, 63 sectors/track, 26564 cylinders Units = cilindri of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System/dev/cciss/c0d0p1 * 1 13 104391 83 Linux/dev/cciss/c0d0p2 14 17709 142143120 8e Linux LVM
**********************************
root@mail init.d]# pvdisplay
--- Physical volume ---
PV Name /dev/cciss/c0d0p2
VG Name VolGroup00
PV Size 135,53 GB / not usable 0
Allocatable yes
PE Size (KByte) 32768
Total PE 4337
Free PE 1
Allocated PE 4336
PV UUID XAEWQR-s1qj-Cj5K-gv0W-9ndt-lroN-35ZvNE
..........
[root@mail init.d]# vgdisplay -v
Finding all volume groups
Finding volume group "VolGroup00"
--- Volume group ---
VG Name VolGroup00
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 1
Act PV 1
VG Size 135,53 GB
PE Size 32,00 MB
Total PE 4337
Alloc PE / Size 4336 / 135,50 GB
Free PE / Size 1 / 32,00 MB
VG UUID hVHrwV-Dt53-wbGa-ZwHQ-ZWcX-t5Tm-vQIVUu
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol00
VG Name VolGroup00
LV UUID 0QlVVm-W4ZY-tSLv-syu6-qS6J-b2u9-2Ed13l
LV Write Access read/write
LV Status available
# open 1 LV Size 133,56 GB Current LE 4274 Segments 1 Allocation inherit Read ahead sectors 0 Block device 253:0
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol01
VG Name VolGroup00
LV UUID Apww83-TFLq-KqM9-zwEt-zPAW-a3J8-EPP8j7
LV Write Access read/write
LV Status available
# open 1 LV Size 1,94 GB Current LE 62 Segments 1 Allocation inherit Read ahead sectors 0 Block device 253:1
--- Physical volumes ---
PV Name /dev/cciss/c0d0p2
PV UUID XAEWQR-s1qj-Cj5K-gv0W-9ndt-lroN-35ZvNE
PV Status allocatable
Total PE / Free PE 4337 / 1
It's clear that I have to expand the physical space but the only command I know ,PVRESIZE, is not yet implemented but I know there is a workaround for it .
My last idea is to backup data and reinstall everything but , honestly , I'd prefer an alternative solution . Consider that this server is already working in a production environment...... The workaround is based on using vgcfgbackup , edit the config file and vgcfgrestore . I know it's a very dangerous operation and since I'm a very newbie to linux , I couldn't understand how to modify the parameter pe_count (as indicated by the workaround) of the backed up /etc/lvm/backup/VolGroup00 file . Here below u'll find the content of the above mentioned file. How should I modify the pe_count value in order to use these added 72Gbs of new free space ? Many many thanks in advance .
Max ( Italy )
*******************
# Generated by LVM2: Wed Dec 21 11:50:55 2005
contents = "Text Format Volume Group"
version = 1
description = "Created *after* executing 'vgcfgbackup'"
creation_host = "mail.laferspa.com" # Linux mail.laferspa.com 2.6.9-22.0.1.ELsmp #1 SMP Thu Oct 27 13:14:25 CDT 2005 i686creation_time = 1135162255 # Wed Dec 21 11:50:55 2005
VolGroup00 {
id = "hVHrwV-Dt53-wbGa-ZwHQ-ZWcX-t5Tm-vQIVUu"
seqno = 3
status = ["RESIZEABLE", "READ", "WRITE"]
extent_size = 65536 # 32 Megabytes
max_lv = 0
max_pv = 0
physical_volumes {
pv0 {
id = "XAEWQR-s1qj-Cj5K-gv0W-9ndt-lroN-35ZvNE"
device = "/dev/cciss/c0d0p2" # Hint only
status = ["ALLOCATABLE"]
pe_start = 384
pe_count = 4337 # 135,531 Gigabytes
}}
logical_volumes {
LogVol00 {
id = "0QlVVm-W4ZY-tSLv-syu6-qS6J-b2u9-2Ed13l"
status = ["READ", "WRITE", "VISIBLE"]
segment_count = 1
segment1 {
start_extent = 0
extent_count = 4274 # 133,562 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
"pv0", 0
]
}
}
LogVol01 {
id = "Apww83-TFLq-KqM9-zwEt-zPAW-a3J8-EPP8j7"
status = ["READ", "WRITE", "VISIBLE"]
segment_count = 1
segment1 {
start_extent = 0
extent_count = 62 # 1,9375 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
"pv0", 4274
]
}
} }
}
Quoted 5 lines · Massimiliano
Hi !
My first post here !
I've recently added a fourth Scsi Hard disk to my Proliant ML350 configured as follow :
SmartArray Controller 641 with 3 72Gb Scsi h.disks.(raid5)
Quoted 8 lines
I installed on my Centos 4.2 the HP Array configuration Utility and did the following steps:
1) Expanded my array
2) Expanded my logical Volume
Everything ok . Now I can see 4 physical drives
and a new total space increased of 72gb(obviously..)
The problem is that the operating doesen't seem to recognize the new free space .
If by "operating system", you mean that the filesystem isn't any bigger, then all you need to do is re-size the filesystem (using 'resize2fs') to take advantage of the new space.
Quoted 6 lines
**********************************
root@mail init.d]# pvdisplay
--- Physical volume ---
PV Name/dev/cciss/c0d0p2
VG Name VolGroup00
PV Size 135,53 GB / not usable 0
Ok.
Quoted 7 lines
[root@mail init.d]# vgdisplay -v
Finding all volume groups
Finding volume group "VolGroup00"
--- Volume group ---
VG Name VolGroup00
Alloc PE / Size 4336 / 135,50 GB
Free PE / Size 1 / 32,00 MB
So all your PE's are allocated, and I think you're all set to do the filesystem re-size. I don't think you want to be messing with pvresize.
--Matt
Quoted 1 line · Massimiliano
Hi !
two ways, either create a new partition with the free space, pvcreate it and vgextend your volume group
or
edit your partition table and make the 2nd partition bigger. (you might need to reboot here)
then
Quoted 10 lines
How should I modify the
pe_countvalue in order to use these added 72Gbs of new free space ?*******************
# Generated by LVM2: Wed Dec 21 11:50:55 2005contents = "Text Format Volume Group"
version = 1description = "Created *after* executing 'vgcfgbackup'"
Quoted 8 lines
creation_host= "mail.laferspa.com" # Linux mail.laferspa.com 2.6.9-22.0.1.ELsmp #1 SMP Thu Oct 27 13:14:25 CDT 2005 i686creation_time= 1135162255 # Wed Dec 21 11:50:55 2005VolGroup00 {
id = "hVHrwV-Dt53-wbGa-ZwHQ-ZWcX-t5Tm-vQIVUu"
seqno = 3
status = ["RESIZEABLE", "READ", "WRITE"]
extent_size= 65536 # 32 Megabytes
^ this is how big is an extent in sectors (512 byte units)
Quoted 5 lines
max_lv= 0
max_pv= 0
physical_volumes{
Quoted 7 lines
pv0 {
id = "XAEWQR-s1qj-Cj5K-gv0W-9ndt-lroN-35ZvNE"
device = "/dev/cciss/c0d0p2" # Hint only
status = ["ALLOCATABLE"]
pe_start = 384
pe_count = 4337 # 135,531 Gigabytesthis is the number of extents your physical volume is the size in sectors is pe_count * extent_size (4337 * 65536 = 284229632) now look at /proc/partitions.
you have the size in bytes for your partition
multiply it by 2 and divide it by extent_size, and you get the new pe
count
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \
Luca Berra ha scritto:
Quoted 11 lines · Massimiliano
Quoted 2 lines
Hi !
two ways, either create a new partition with the free space, pvcreate it and vgextend your volume group
or
edit your partition table and make the 2nd partition bigger. (you might need to reboot here)
then
Did what you suggested (following the first solution) . Now vgdisplay shows me :
VG Name VolGroup00
System ID
Format lvm2 Metadata Areas 2 Metadata Sequence No 12 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 2 Act PV 2 VG Size 203,34 GB PE Size 32,00 MB Total PE 6507 Alloc PE / Size 4336 / 135,50 GB Free PE / Size 2171 / 67,84 GB VG UUID hVHrwV-Dt53-wbGa-ZwHQ-ZWcX-t5Tm-vQIVUu
How can I Allocate now the Free PE /Size ? The filesystem available space is still 135 GB... Thanks
Max (Italy)
Quoted 15 lines · Massimiliano
Luca Berra ha scritto:
Quoted 11 lines · Massimiliano
Quoted 2 lines
Hi !
two ways, either create a new partition with the free space, pvcreate it and vgextend your volume group
or
edit your partition table and make the 2nd partition bigger. (you might need to reboot here)
thenDid what you suggested (following the first solution) . Now vgdisplay
....
Quoted 1 line
How can I Allocate now the Free PE /Size ? The filesystem available space is still 135 GB...
lvextend to increas the size of the logical volume,
then, the tool to resize whatever filesystem you have on that resize2fs/ext2resize/ext2online (EXT2/EXT3) resize_reiserfs/mount -o remount,resize (REISER) xfs_growfs (XFS)
mount -o remount,resize (JFS)
.....
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \