usb/input: Microsoft Natural Ergonomic Keyboard 4000 Driver
PATCH 1/1 usb/input: Microsoft Natural Ergonomic Keyboard 4000 Driver
=====================
Microsoft Natural Ergonomic Keyboard 4000 Driver
=====================
Date:
------------------
20050104
Source code base
------------------
2.6.15
Testing:
------------------
Tested on i386.
Other Tips
------------------
This driver use \"HID device simple driver interface\", so you need that patch first, you can find it in my last email.
The zoom-in handler is mapped to KEY_F13
The zoom-out handler is mapped to KEY_F14
The custom key #1 is mapped to KEY_FN_F1
The custom key #2 is mapped to KEY_FN_F2
The custom key #3 is mapped to KEY_FN_F3
The custom key #4 is mapped to KEY_FN_F4
The custom key #5 is mapped to KEY_FN_F5
Does such arrange suitable?
drivers/usb/input/Kconfig 2006-01-04 16:30:44.000000000 +0800 renamed from drivers/usb/input/Kconfig 2006-01-03 11:21:10.000000000 +0800 +0 -0
@@ -306,3 +306,10 @@ config USB_APPLETOUCH
To compile this driver as a module, choose M here: the module will be called appletouch.
+
+config HID_MSNEK4K
+ tristate \"MS NEK4K Driver\"
+ depends on USB && USB_HID
+ help
+ NEK4K keyboard driver.
+
drivers/usb/input/Makefile 2006-01-04 16:29:59.000000000 +0800 renamed from drivers/usb/input/Makefile 2006-01-03 11:21:10.000000000 +0800 +0 -0
@@ -42,6 +42,7 @@ obj-$(CONFIG_USB_ACECAD) += acecad.o
obj-$(CONFIG_USB_YEALINK) += yealink.o
obj-$(CONFIG_USB_XPAD) += xpad.o
obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
+obj-$(CONFIG_HID_MSNEK4K) += usbnek4k.o
ifeq ($(CONFIG_USB_DEBUG),y)EXTRA_CFLAGS += -DDEBUG
drivers/usb/input/usbnek4k.c 2006-01-04 16:47:42.000000000 +0800 renamed from drivers/usb/input/usbnek4k.c 1970-01-01 08:00:00.000000000 +0800 +328 -0
328 lines not on this page · raw message