Using a disk image file as a device in a raid set (like a loopback device)
Hi
First, this is not a raid recovery problem !!!
I'm recovering a disk failure and for various reasons I've ended up with a partition that's too small to hold the file system that belongs in it.
I managed to create a second small partition on a good bit of the failing disk and use linear mode to concatenate the almost big enough partition (sdc2) with the temp partition (sdb2) to make a big enough space to ddrescue the failing data.
All is now good with 95% of data on the good disk and the small partition is holding up. However I need to get rid of it ASAP. So I dd'ed the small partition onto a good filesystem on sdc1. Now I want to:
mdadm -B /dev/md0 -l linear -n2 /dev/sdc2 /space/sdb2.dd_image
but of course mdadm correctly complains that /space/sdb2.dd_image isn't a block device.
Does anyone know how I can do this?
David
Quoted 7 lines · David Greaves
mdadm -B
/dev/md0-l linear -n2/dev/sdc2/space/sdb2.dd_imagebut of course mdadm correctly complains that /space/sdb2.dd_image isn't a block device.
Does anyone know how I can do this?
use the loopback device
man losetup
Good luck :)
Brad
Signature · 3 lines
"Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so." -- Douglas Adams
doh!
I'm so used to doing mount -oloop that I forgot how much it does for you :)
losetup /dev/loop0 /space/sdb2.dd_image mdadm -B /dev/md0 -l linear -n2 /dev/sdc2 /dev/loop0
works fine.
Sorry for the noise
David
Quoted 29 lines · David Greaves
Hi
First, this is not a raid recovery problem !!!
I'm recovering a disk failure and for various reasons I've ended up with a partition that's too small to hold the file system that belongs in it.
I managed to create a second small partition on a good bit of the failing disk and use linear mode to concatenate the almost big enough partition (sdc2) with the temp partition (sdb2) to make a big enough space to ddrescue the failing data.
All is now good with 95% of data on the good disk and the small partition is holding up. However I need to get rid of it ASAP. So I dd'ed the small partition onto a good filesystem on sdc1. Now I want to:
mdadm -B
/dev/md0-l linear -n2/dev/sdc2/space/sdb2.dd_imagebut of course mdadm correctly complains that /space/sdb2.dd_image isn't a block device.
Does anyone know how I can do this?
David