Skip to contentSkip to conversation

About the u-boot (in ELF binary format)

U-Boot-Users 腾飞龙 3 participants 5 messages Jan 9, 2006 – Jan 10, 2006

lore
Share & tools
lore

腾飞龙

author
#0 lore raw

Hi,
I have successfully compiled u-boot and ,as you know, there are
several object files produced after"make all", one of which is u-boot(in ELF binary format) . Now, i run the u-boot(in ELF binary
format) in target board (Embedded Planet EP405)with Linux kernel and
NFS file system.

    # ./u-boot
    then appears the error echo:
    Segmentation fault
    will you please tell me what's the problem and how to solve it?
   Thank you and best wishes!!
#1 lore raw
Quoted 10 lines · In message <[email protected]> you wrote:

I have successfully compiled u-boot and ,as you know, there are
several object files produced after"make all", one of which is u-boot(in ELF binary format) . Now, i run the u-boot(in ELF binary
format) in target board (Embedded Planet EP405)with Linux kernel and
NFS file system.

    # ./u-boot
    then appears the error echo:
    Segmentation fault
    will you please tell me what's the problem and how to solve it?

U-Boot is a boot loader and not an application programm which can be run under Linux.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Every little picofarad has a nanohenry all its own.      - Don Vonada
author
#2 lore raw

Hi,
As you said, one must download the .bin file to flash and not the
ELF file, and U-Boot is a boot loader and not an application programm which can be
run under Linux. then, what is the u-boot(in ELF binary format) for ?
I red the book"Building Embeded Linux systems " written by Karim
Yaghmour,in section 9.5 it described like this:
If you intend to debug U-Boot itself ,copy the ELF binary also:

  $ u-boot ${PROJECT}/images/u-boot-0.2.0
  Here ${PROJECT}/images is a directory to which u make a copy of the
relevant bootloader images. so, i guess the ELF file may be downloaded
to target to debug u-boot. Is it so and how does the file work?
  Thank you in advance!

2006/1/9, Wolfgang Denk <[email protected]>:

Quoted 24 lines
Quoted 10 lines · In message <[email protected]> you wrote:

I have successfully compiled u-boot and ,as you know, there are
several object files produced after"make all", one of which is u-boot(in ELF binary format) . Now, i run the u-boot(in ELF binary
format) in target board (Embedded Planet EP405)with Linux kernel and
NFS file system.

    # ./u-boot
    then appears the error echo:
    Segmentation fault
    will you please tell me what's the problem and how to solve it?

U-Boot is a boot loader and not an application programm which can be run under Linux.

Best regards,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Every little picofarad has a nanohenry all its own. - Don Vonada

#3 lore raw

[U-Boot-Users] »Ø¸´: About the u-boot (in ELF binary format)

Hi ???

The ELF file is used by HW-debuggers, since it contains symbol information.

/Tore Martin Hagen

Quoted 48 lines · ???

Hi,
As you said, one must download the .bin file to flash and not the
ELF file, and U-Boot is a boot loader and not an application programm which can be
run under Linux. then, what is the u-boot(in ELF binary format) for ?
I red the book"Building Embeded Linux systems " written by Karim
Yaghmour,in section 9.5 it described like this:
If you intend to debug U-Boot itself ,copy the ELF binary also:

 $ u-boot ${PROJECT}/images/u-boot-0.2.0
 Here ${PROJECT}/images is a directory to which u make a copy of the
relevant bootloader images. so, i guess the ELF file may be downloaded
to target to debug u-boot. Is it so and how does the file work?
 Thank you in advance!

2006/1/9, Wolfgang Denk <[email protected]>:

Quoted 17 lines
Quoted 11 lines · In message <[email protected]> you wrote:

I have successfully compiled u-boot and ,as you know, there are
several object files produced after"make all", one of which is u-boot(in ELF binary format) . Now, i run the u-boot(in ELF binary
format) in target board (Embedded Planet EP405)with Linux kernel and
NFS file system.

   # ./u-boot
   then appears the error echo:
   Segmentation fault
   will you please tell me what's the problem and how to solve it?

U-Boot is a boot loader and not an application programm which can be run under Linux.

Quoted 11 lines

Best regards,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Every little picofarad has a nanohenry all its own. - Don Vonada

Quoted 11 lines

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&opclick
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060110/cfdf41d9/attachment.htm

#4 lore raw
In reply to 腾飞龙
Quoted 5 lines · In message <[email protected]> you wrote:

As you said, one must download the .bin file to flash and not the
ELF file, and U-Boot is a boot loader and not an application programm which can be
run under Linux. then, what is the u-boot(in ELF binary format) for ?

for debuggung. You need an ELF file to load into GDB.

Quoted 4 lines

I red the book"Building Embeded Linux systems " written by Karim
Yaghmour,in section 9.5 it described like this:
If you intend to debug U-Boot itself ,copy the ELF binary also:

  $ u-boot ${PROJECT}/images/u-boot-0.2.0

Yes, and you should read more of this book, and especially more of the U-Boot manual, too.

Quoted 3 lines

Here ${PROJECT}/images is a directory to which u make a copy of the
relevant bootloader images. so, i guess the ELF file may be downloaded to target to debug u-boot. Is it so and how does the file work?

You guessed wrong. Instead, read the documentation.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Q:  Why do mountain climbers rope themselves together?
A:  To prevent the sensible ones from going home.