e100 in 2.6.15 fails unless irqpoll ist used
Hi,
An upgrade from 2.6.14.3 to 2.6.15 on my testmachine disabled my network cards: no packets are sent or received.
There is the following in dmesg:
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3 irq 11: nobody cared (try booting with the "irqpoll" option)
[<c012ae21>] __report_bad_irq+0x31/0x77 [<c012aef4>] note_interrupt+0x75/0x99 [<c012a9f0>] __do_IRQ+0x65/0x91
...
Rebooting with irqpoll will make the network cards work. The above message will appeare nonetheless.
lspci output:
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04) 0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 04) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 11)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11) 0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11) 0000:01:00.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
0000:01:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) 0000:01:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
What does irqpoll do?
Any more info needed?
Signature · 15 lines
Mit freundlichen Grüßen / with kind regards Nils Rennebarth -- VarySys Technologies GmbH & Co. KG Moenchhaldenstraße 28 70191 Stuttgart Germany Tel +49 711 2501198 Fax +49 711 2501197 mailto:[email protected] http://www.packetalarm.com Download the free software trial version of PacketAlarm now http://www.packetalarm.com/download/
Quoted 10 lines · Nils Rennebarth
An upgrade from 2.6.14.3 to 2.6.15 on my testmachine disabled my network cards:
no packets are sent or received.There is the following in dmesg:
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3 irq 11: nobody cared (try booting with the "irqpoll" option)
Quoted 7 lines
[<c012ae21>] __report_bad_irq+0x31/0x77 [<c012aef4>] note_interrupt+0x75/0x99 [<c012a9f0>] __do_IRQ+0x65/0x91 ...Rebooting with irqpoll will make the network cards work. The above message will appeare nonetheless.
This means that your IRQ routing broke and the card's interrupt requests are not getting through.
This is likely to be an ACPI regression. Please raise a report at bugzilla.kernel.org, generate full `dmesg -s 1000000' output for both 2.6.14.3 and for 2.6.15 and attach them to the report, thanks.
Quoted 18 lines · Andrew Morton
Quoted 8 lines · Nils Rennebarth
An upgrade from 2.6.14.3 to 2.6.15 on my testmachine disabled my network cards: no packets are sent or received.
There is the following in dmesg:
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3 irq 11: nobody cared (try booting with the "irqpoll" option)Quoted 6 lines
[<c012ae21>] __report_bad_irq+0x31/0x77 [<c012aef4>] note_interrupt+0x75/0x99 [<c012a9f0>] __do_IRQ+0x65/0x91...
Rebooting with irqpoll will make the network cards work. The above message will appeare nonetheless.
Quoted 6 lines
This means that your IRQ routing broke and the card's interrupt requests are not getting through.
This is likely to be an ACPI regression. Please raise a report at bugzilla.kernel.org, generate full `dmesg -s 1000000' output for both 2.6.14.3 and for 2.6.15 and attach them to the report, thanks.
Thanks for your fast reply.
As I do not have access to my work machine from home I could only answer today, and try what I might, I am not able to reproduce the mentioned behaviour any more.
The first thing I tried last Wednesday was to pull out an unused Adaptec AHA-2940U SCSI controller which happened to be in the machine for testing purposes only.
This "fixed" the network cards as well and now reinserting the SCSI adapter does not break them again, neither can I reproduce the "nobody cared" message. Unfortunately I also overwrote the saved dmesg from a boot where the network cards *did* break.
So the only thing I have is a dmesg (which I cannot reproduce) where irqpoll seems to have fixed the problem, and apart form the missing "nobody cares" plus the backtrace, it differs from the current one in the order the hardware is detected.
I'll be more cautious to save useful information if said behaviour raises its ugly head again, but for now, thanks and sorry for the noise.
Signature · 15 lines
Mit freundlichen Grüßen / with kind regards Nils Rennebarth -- VarySys Technologies GmbH & Co. KG Moenchhaldenstraße 28 70191 Stuttgart Germany Tel +49 711 2501198 Fax +49 711 2501197 mailto:[email protected] http://www.packetalarm.com Download the free software trial version of PacketAlarm now http://www.packetalarm.com/download/