merge powerpc fpu.S and fpu_64.S
PATCH 1/1 merge powerpc fpu.S and fpu_64.S
Currently the two powerpc fpu*.S assembly sections are so similar that there's really no need for two of them. Merge them into a common fpu.S. Tested on a G5.
-- Heikki Lindholm
ksrc/arch/powerpc/fpu.S +16 -1
@@ -19,9 +19,24 @@ #include <linux/config.h> #include <asm/processor.h> -#include <asm/cputable.h> #include <asm/ppc_asm.h> +#ifdef CONFIG_PPC601_SYNC_FIX +#define SYNC \ +BEGIN_FTR_SECTION \ + sync; \ + isync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#else /* !CONFIG_PPC601_SYNC_FIX */ +#define SYNC +#endif /* CONFIG_PPC601_SYNC_FIX */ + +#if defined(CONFIG_PPC64) || defined(CONFIG_PPC64BRIDGE) +#define MTMSRD(r) .long (0x7c000164 + ((r) << 21)) /* mtmsrd */ +#else +#define MTMSRD(r) mtmsr r +#endif /* CONFIG_PPC64 || CONFIG_PPC64BRIDGE */ + #define RTHAL_FPSAVE(n, base) stfd n,8*(n)(base) #define RTHAL_FPSAVE2(n, base) RTHAL_FPSAVE(n, base); RTHAL_FPSAVE(n+1, base) #define RTHAL_FPSAVE4(n, base) RTHAL_FPSAVE2(n, base); RTHAL_FPSAVE2(n+2, base)
ksrc/arch/powerpc/fpu_64.S +0 -71
71 lines not on this page · raw message
ksrc/arch/powerpc/Makefile +2 -4
@@ -5,13 +5,12 @@ obj-$(CONFIG_XENOMAI) += xeno_hal.o xeno_hal-y := hal.o +xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu.o ifeq ($(CONFIG_PPC64),y) xeno_hal-$(CONFIG_PPC64) += switch_64.o -xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu_64.o else xeno_hal-$(CONFIG_PPC) += switch.o -xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu.o endif else
@@ -23,13 +22,12 @@ O_TARGET := built-in.o obj-y := hal.o +obj-$(CONFIG_XENO_HW_FPU) += fpu.o ifeq ($(CONFIG_PPC64),y) obj-y += switch_64.o -obj-$(CONFIG_XENO_HW_FPU) += fpu_64.o else obj-y += switch.o -obj-$(CONFIG_XENO_HW_FPU) += fpu.o endif export-objs := hal.o
Philippe Gerum
AppliedQuoted 1 line · Heikki Lindholm
Currently the two powerpc fpu*.S assembly sections are so similar that there's really no need for two of them. Merge them into a common
fpu.S. Tested on a G5.
Queued for -rc3. Thanks.
Quoted 151 lines
-- Heikki Lindholm
------------------------------------------------------------------------
diff -Nru
xenomai/ksrc/arch/powerpc/fpu.Sxenomai-devel/ksrc/arch/powerpc/fpu.Sksrc/arch/powerpc/fpu.S +16
-1@@ -19,9 +19,24 @@ #include <linux/config.h> #include <asm/processor.h> -#include <asm/cputable.h> #include <asm/ppc_asm.h> +#ifdef CONFIG_PPC601_SYNC_FIX +#define SYNC \ +BEGIN_FTR_SECTION \ + sync; \ + isync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#else /* !CONFIG_PPC601_SYNC_FIX */ +#define SYNC +#endif /* CONFIG_PPC601_SYNC_FIX */ + +#if defined(CONFIG_PPC64) || defined(CONFIG_PPC64BRIDGE) +#define MTMSRD(r) .long (0x7c000164 + ((r) << 21)) /* mtmsrd */ +#else +#define MTMSRD(r) mtmsr r +#endif /* CONFIG_PPC64 || CONFIG_PPC64BRIDGE */ + #define RTHAL_FPSAVE(n, base) stfd n,8*(n)(base) #define RTHAL_FPSAVE2(n, base) RTHAL_FPSAVE(n, base); RTHAL_FPSAVE(n+1, base) #define RTHAL_FPSAVE4(n, base) RTHAL_FPSAVE2(n, base); RTHAL_FPSAVE2(n+2, base)diff -Nru
xenomai/ksrc/arch/powerpc/fpu_64.Sxenomai-devel/ksrc/arch/powerpc/fpu_64.Sksrc/arch/powerpc/fpu_64.S +0
-71@@ -1,71 +0,0 @@ -/* - * Copyright (C) 2001,2002,2003,2004 Philippe Gerum. - * - * 64-bit PowerPC adoption - * copyright (C) 2005 Taneli Vähäkangas and Heikki Lindholm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, - * USA; either version 2 of the License, or (at your option) any later - * version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> - -#define RTHAL_FPSAVE(n, base) stfd n,8*(n)(base) -#define RTHAL_FPSAVE2(n, base) RTHAL_FPSAVE(n, base); RTHAL_FPSAVE(n+1, base) -#define RTHAL_FPSAVE4(n, base) RTHAL_FPSAVE2(n, base); RTHAL_FPSAVE2(n+2, base) -#define RTHAL_FPSAVE8(n, base) RTHAL_FPSAVE4(n, base); RTHAL_FPSAVE4(n+4, base) -#define RTHAL_FPSAVE16(n, base) RTHAL_FPSAVE8(n, base); RTHAL_FPSAVE8(n+8, base) -#define RTHAL_FPSAVE32(n, base) RTHAL_FPSAVE16(n, base); RTHAL_FPSAVE16(n+16, base) - -/* r3 = &tcb->fpuenv */ -_GLOBAL(rthal_save_fpu) - mfmsr r5 - ori r5,r5,MSR_FP /* Re-enable use of FPU. */ - mtmsrd r5 /* Enable use of fpu. */ - isync - RTHAL_FPSAVE32(0,r3) - mffs fr0 - stfd fr0,8*32(r3) - blr - -#define RTHAL_FPLOAD(n, base) lfd n,8*(n)(base) -#define RTHAL_FPLOAD2(n, base) RTHAL_FPLOAD(n, base); RTHAL_FPLOAD(n+1, base) -#define RTHAL_FPLOAD4(n, base) RTHAL_FPLOAD2(n, base); RTHAL_FPLOAD2(n+2, base) -#define RTHAL_FPLOAD8(n, base) RTHAL_FPLOAD4(n, base); RTHAL_FPLOAD4(n+4, base) -#define RTHAL_FPLOAD16(n, base) RTHAL_FPLOAD8(n, base); RTHAL_FPLOAD8(n+8, base) -#define RTHAL_FPLOAD32(n, base) RTHAL_FPLOAD16(n, base); RTHAL_FPLOAD16(n+16, base) - -/* r3 = &tcb->fpuenv */ -_GLOBAL(rthal_init_fpu) - mfmsr r5 - ori r5,r5,MSR_FP|MSR_FE1 /* RT kernel threads always operate in */ - li r4,MSR_FE0 /* imprecise non-recoverable exception mode. */ - andc r5,r5,r4 - mtmsrd r5 - - /* Fallback wanted. */ - -/* r3 = &tcb->fpuenv */ -_GLOBAL(rthal_restore_fpu) - mfmsr r5 - ori r5,r5,MSR_FP /* Re-enable use of FPU. */ - mtmsrd r5 /* Enable use of fpu. */ - isync - lfd fr0,8*32(r3) - mtfsf 0xff,0 - RTHAL_FPLOAD32(0,r3) - blrdiff -Nru xenomai/ksrc/arch/powerpc/Makefile xenomai-devel/ksrc/arch/powerpc/Makefile
ksrc/arch/powerpc/Makefile +2
-5@@ -5,13 +5,12 @@ obj-$(CONFIG_XENOMAI) += xeno_hal.o xeno_hal-y := hal.o +xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu.o ifeq ($(CONFIG_PPC64),y) xeno_hal-$(CONFIG_PPC64) += switch_64.o -xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu_64.o else xeno_hal-$(CONFIG_PPC) += switch.o -xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu.o endif else@@ -23,13 +22,12 @@ O_TARGET := built-in.o obj-y := hal.o +obj-$(CONFIG_XENO_HW_FPU) += fpu.o ifeq ($(CONFIG_PPC64),y) obj-y += switch_64.o -obj-$(CONFIG_XENO_HW_FPU) += fpu_64.o else obj-y += switch.o -obj-$(CONFIG_XENO_HW_FPU) += fpu.o endif export-objs := hal.o ------------------------------------------------------------------------_______________________________________________
Xenomai-core mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-core
Signature · 1 line
Philippe.
Philippe Gerum
AppliedQuoted 2 lines · Heikki Lindholm
Currently the two powerpc fpu*.S assembly sections are so similar that there's really no need for two of them. Merge them into a common
fpu.S. Tested on a G5.
Applied, thanks.
Quoted 150 lines
-- Heikki Lindholm
------------------------------------------------------------------------
diff -Nru
xenomai/ksrc/arch/powerpc/fpu.Sxenomai-devel/ksrc/arch/powerpc/fpu.Sksrc/arch/powerpc/fpu.S +16
-1@@ -19,9 +19,24 @@ #include <linux/config.h> #include <asm/processor.h> -#include <asm/cputable.h> #include <asm/ppc_asm.h> +#ifdef CONFIG_PPC601_SYNC_FIX +#define SYNC \ +BEGIN_FTR_SECTION \ + sync; \ + isync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#else /* !CONFIG_PPC601_SYNC_FIX */ +#define SYNC +#endif /* CONFIG_PPC601_SYNC_FIX */ + +#if defined(CONFIG_PPC64) || defined(CONFIG_PPC64BRIDGE) +#define MTMSRD(r) .long (0x7c000164 + ((r) << 21)) /* mtmsrd */ +#else +#define MTMSRD(r) mtmsr r +#endif /* CONFIG_PPC64 || CONFIG_PPC64BRIDGE */ + #define RTHAL_FPSAVE(n, base) stfd n,8*(n)(base) #define RTHAL_FPSAVE2(n, base) RTHAL_FPSAVE(n, base); RTHAL_FPSAVE(n+1, base) #define RTHAL_FPSAVE4(n, base) RTHAL_FPSAVE2(n, base); RTHAL_FPSAVE2(n+2, base)diff -Nru
xenomai/ksrc/arch/powerpc/fpu_64.Sxenomai-devel/ksrc/arch/powerpc/fpu_64.Sksrc/arch/powerpc/fpu_64.S +0
-71@@ -1,71 +0,0 @@ -/* - * Copyright (C) 2001,2002,2003,2004 Philippe Gerum. - * - * 64-bit PowerPC adoption - * copyright (C) 2005 Taneli Vähäkangas and Heikki Lindholm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, - * USA; either version 2 of the License, or (at your option) any later - * version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> - -#define RTHAL_FPSAVE(n, base) stfd n,8*(n)(base) -#define RTHAL_FPSAVE2(n, base) RTHAL_FPSAVE(n, base); RTHAL_FPSAVE(n+1, base) -#define RTHAL_FPSAVE4(n, base) RTHAL_FPSAVE2(n, base); RTHAL_FPSAVE2(n+2, base) -#define RTHAL_FPSAVE8(n, base) RTHAL_FPSAVE4(n, base); RTHAL_FPSAVE4(n+4, base) -#define RTHAL_FPSAVE16(n, base) RTHAL_FPSAVE8(n, base); RTHAL_FPSAVE8(n+8, base) -#define RTHAL_FPSAVE32(n, base) RTHAL_FPSAVE16(n, base); RTHAL_FPSAVE16(n+16, base) - -/* r3 = &tcb->fpuenv */ -_GLOBAL(rthal_save_fpu) - mfmsr r5 - ori r5,r5,MSR_FP /* Re-enable use of FPU. */ - mtmsrd r5 /* Enable use of fpu. */ - isync - RTHAL_FPSAVE32(0,r3) - mffs fr0 - stfd fr0,8*32(r3) - blr - -#define RTHAL_FPLOAD(n, base) lfd n,8*(n)(base) -#define RTHAL_FPLOAD2(n, base) RTHAL_FPLOAD(n, base); RTHAL_FPLOAD(n+1, base) -#define RTHAL_FPLOAD4(n, base) RTHAL_FPLOAD2(n, base); RTHAL_FPLOAD2(n+2, base) -#define RTHAL_FPLOAD8(n, base) RTHAL_FPLOAD4(n, base); RTHAL_FPLOAD4(n+4, base) -#define RTHAL_FPLOAD16(n, base) RTHAL_FPLOAD8(n, base); RTHAL_FPLOAD8(n+8, base) -#define RTHAL_FPLOAD32(n, base) RTHAL_FPLOAD16(n, base); RTHAL_FPLOAD16(n+16, base) - -/* r3 = &tcb->fpuenv */ -_GLOBAL(rthal_init_fpu) - mfmsr r5 - ori r5,r5,MSR_FP|MSR_FE1 /* RT kernel threads always operate in */ - li r4,MSR_FE0 /* imprecise non-recoverable exception mode. */ - andc r5,r5,r4 - mtmsrd r5 - - /* Fallback wanted. */ - -/* r3 = &tcb->fpuenv */ -_GLOBAL(rthal_restore_fpu) - mfmsr r5 - ori r5,r5,MSR_FP /* Re-enable use of FPU. */ - mtmsrd r5 /* Enable use of fpu. */ - isync - lfd fr0,8*32(r3) - mtfsf 0xff,0 - RTHAL_FPLOAD32(0,r3) - blrdiff -Nru xenomai/ksrc/arch/powerpc/Makefile xenomai-devel/ksrc/arch/powerpc/Makefile
ksrc/arch/powerpc/Makefile +2
-5@@ -5,13 +5,12 @@ obj-$(CONFIG_XENOMAI) += xeno_hal.o xeno_hal-y := hal.o +xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu.o ifeq ($(CONFIG_PPC64),y) xeno_hal-$(CONFIG_PPC64) += switch_64.o -xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu_64.o else xeno_hal-$(CONFIG_PPC) += switch.o -xeno_hal-$(CONFIG_XENO_HW_FPU) += fpu.o endif else@@ -23,13 +22,12 @@ O_TARGET := built-in.o obj-y := hal.o +obj-$(CONFIG_XENO_HW_FPU) += fpu.o ifeq ($(CONFIG_PPC64),y) obj-y += switch_64.o -obj-$(CONFIG_XENO_HW_FPU) += fpu_64.o else obj-y += switch.o -obj-$(CONFIG_XENO_HW_FPU) += fpu.o endif export-objs := hal.o ------------------------------------------------------------------------_______________________________________________
Xenomai-core mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-core
Signature · 1 line
Philippe.