Skip to contentSkip to conversation

DE2104X

DISCUSSION Rene Herman 2 participants 2 messages Jan 6, 2006 – Jan 17, 2006

lore
Share & tools
lore
#0 lore raw

Hi Jeff.

Upgraded a DEC Multia to 2.6 today and noticed its 21040 was split off into the "de2104x" driver. Also see it's marked "experimental" and just wanted to report that it seems to be working fine on the 21040 as found in a DEC Multia (Pentium variant):

00:08.0 Ethernet controller: Digital Equipment Corporation DECchip 21040 [Tulip] (rev 23)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 64
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at f880 [size=128]
        Region 1: Memory at fedff800 (32-bit, non-prefetchable) [size=128]

(PCI ID 1011:0002).

Rene.

#1 lore raw
Quoted 3 lines · Rene Herman

Hi Jeff.

Upgraded a DEC Multia to 2.6 today and noticed its 21040 was split off into the "de2104x" driver. Also see it's marked "experimental" and just wanted to report that it seems to be working fine on the 21040 as found in a DEC Multia (Pentium variant):

Thanks much for the report, that driver doesn't get much testing.

I believe there is still a problem with cable types other than 10baseT, but I would have to search deep in the archives to find info.

Jeff