PROBLEM: kernel BUG at lib/kernel_lock.c:199!
Dear sirs,
I have a problem with a dual athlon xp running fedora/4 with the 2.6.14-1 kernel. Hard locks. Please if anyone knows a solution or workaround please contact me at [email protected]. Many thanks and keep up the best work.
fda
[1.] Machine lock
[2.] Server randomly locks up without any error
or message.
[3.] kernel
[4.] uname -r : 2.6.14-1.1656_FC4smp
[5.] in the last lockup I have found this only
line in /var/log/messages:
Feb 2 15:27:32 telethon kernel: kernel BUG at lib/kernel_lock.c:199!
[6.] not reproducible - random error
[7.]
[7.1] standard fedora 4 install - nothing new added, just the drivers for the nv graphic board.
[7.2] /proc/cpuinfo:
processor : 0vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) MP 2000+
stepping : 2
cpu MHz : 1666.855
cache size : 256 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 3340.03
processor : 1vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) MP 2000+
stepping : 2
cpu MHz : 1666.855
cache size : 256 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 3333.75
[7.3]
cat /proc/modules
ipt_MASQUERADE 7745 1 - Live 0xf8dba000iptable_nat 11717 1 - Live 0xf8db2000ip_nat 22869 2 ipt_MASQUERADE,iptable_nat, Live 0xf8dca000ip_conntrack 56861 3 ipt_MASQUERADE,iptable_nat,ip_nat, Live 0xf8e29000
nfnetlink 10585 2 ip_nat,ip_conntrack, Live 0xf8d97000iptable_filter 7105 1 - Live 0xf8add000ip_tables 25409 3 ipt_MASQUERADE,iptable_nat,iptable_filter, Live 0xf8e0f000parport_pc 31877 0 - Live 0xf8e06000
lp 16905 0 - Live 0xf8da3000
parport 39561 2 parport_pc,lp, Live 0xf8dbf000
autofs4 23621 1 - Live 0xf8dab000i2c_dev 13889 0 - Live 0xf8d92000i2c_core 26177 1 i2c_dev, Live 0xf8d9b000
nfs 212264 1 - Live 0xf8dd1000
lockd 64329 2 nfs, Live 0xf8b4f000nfs_acl 7873 1 nfs, Live 0xf8ada000
rfcomm 47193 0 - Live 0xf8b7a000
l2cap 34113 5 rfcomm, Live 0xf8b70000
bluetooth 57029 4 rfcomm,l2cap, Live 0xf8b61000
sunrpc 145917 4 nfs,lockd,nfs_acl, Live 0xf8d6d000
reiserfs 267061 2 - Live 0xf8b87000dm_mod 61277 0 - Live 0xf8b2d000
nvidia 4095984 12 - Live 0xf8f31000
ipv6 270881 82 - Live 0xf8a07000ohci_hcd 26849 0 - Live 0xf89a0000ehci_hcd 38733 0 - Live 0xf89ac000hw_random 9557 0 - Live 0xf8946000snd_cmipci 36961 0 - Live 0xf8995000
gameport 19785 1 snd_cmipci, Live 0xf889d000snd_seq_dummy 7749 0 - Live 0xf8937000snd_seq_oss 36161 0 - Live 0xf898b000snd_seq_midi_event 11073 1 snd_seq_oss, Live 0xf8929000snd_seq 54993 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live 0xf896b000snd_pcm_oss 54641 0 - Live 0xf897c000snd_mixer_oss 21953 1 snd_pcm_oss, Live 0xf893f000snd_pcm 91717 2 snd_cmipci,snd_pcm_oss, Live 0xf8953000snd_page_alloc 14793 1 snd_pcm, Live 0xf8924000snd_opl3_lib 14529 1 snd_cmipci, Live 0xf88f2000snd_timer 28997 3 snd_seq,snd_pcm,snd_opl3_lib, Live 0xf892e000snd_hwdep 13153 1 snd_opl3_lib, Live 0xf88ed000snd_mpu401_uart 11713 1 snd_cmipci, Live 0xf883e000snd_rawmidi 28897 1 snd_mpu401_uart, Live 0xf891b000snd_seq_device 13005 5 snd_seq_dummy,snd_seq_oss,snd_seq,snd_opl3_lib,snd_rawmidi, Live 0xf88a3000
snd 59045 12 snd_cmipci,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xf88d0000 soundcore 13857 1 snd, Live 0xf884f000
3c59x 45801 0 - Live 0xf88e0000
mii 9281 1 3c59x, Live 0xf8842000
floppy 66053 0 - Live 0xf8878000
ext3 135241 1 - Live 0xf88f8000
jbd 61909 1 ext3, Live 0xf888c000
raid1 25153 1 - Live 0xf8847000
aic7xxx 154485 1 - Live 0xf88a9000scsi_transport_spi 25153 1 aic7xxx, Live 0xf8828000sd_mod 22721 2 - Live 0xf8830000scsi_mod 140137 3 aic7xxx,scsi_transport_spi,sd_mod, Live 0xf8854000
[7.5]
cat /proc/iomem
00000000-0009f3ff : System RAM
0009f400-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cc7ff : Video ROM
000d0000-000d69ff : Adapter ROM
000d8000-000d87ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3fffffff : System RAM
00100000-0031df91 : Kernel code
0031df92-003e99a3 : Kernel data
50000000-5001ffff : 0000:00:09.0
50020000-5003ffff : 0000:00:09.1
ea000000-ecffffff : PCI Bus #02
ea000000-ea0000ff : 0000:02:08.2
ea000000-ea0000ff : ehci_hcd
ea800000-ea800fff : 0000:02:08.1
ea800000-ea800fff : ohci_hcd
eb000000-eb000fff : 0000:02:08.0
eb000000-eb000fff : ohci_hcd eb800000-eb80007f : 0000:02:06.0
ec000000-ec00007f : 0000:02:05.0
ed000000-ed000fff : 0000:00:09.1
ed000000-ed000fff : aic7xxx
ed800000-ed800fff : 0000:00:09.0
ed800000-ed800fff : aic7xxx
ee000000-efcfffff : PCI Bus #01
ee000000-eeffffff : 0000:01:05.0
ee000000-eeffffff : nvidia
efd00000-efdfffff : PCI Bus #02
efd00000-efd1ffff : 0000:02:05.0
efd20000-efd3ffff : 0000:02:06.0
eff00000-fb7fffff : PCI Bus #01
efff0000-efffffff : 0000:01:05.0
f0000000-f7ffffff : 0000:01:05.0
fb800000-fb800fff : 0000:00:00.0
fc000000-fdffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
#cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #02
b000-b07f : 0000:02:06.0
b000-b07f : 0000:02:06.0
b400-b47f : 0000:02:05.0
b400-b47f : 0000:02:05.0
b800-b8ff : 0000:02:04.0
b800-b8ff : CMI8738-MC6d000-d0ff : 0000:00:09.1
d400-d4ff : 0000:00:09.0
d800-d80f : 0000:00:07.1
d800-d807 : ide0
d808-d80f : ide1
e800-e803 : 0000:00:00.0
[7.5] lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fb800000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at e800 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff
Memory behind bridge: ee000000-efcfffff Prefetchable memory behind bridge: eff00000-fb7fffff Secondary status: 66Mhz+ FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 04)
Subsystem: ASUSTeK Computer Inc. A7M-D Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
Subsystem: ASUSTeK Computer Inc. A7M-D Mainboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 145
BIST result: 00
Region 0: I/O ports at d400 [disabled] [size=256] Region 1: Memory at ed800000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size 08
Interrupt: pin B routed to IRQ 153
BIST result: 00
Region 0: I/O ports at d000 [disabled] [size=256] Region 1: Memory at ed000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 50020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ea000000-ecffffff Prefetchable memory behind bridge: efd00000-efdfffff Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) (prog-if 00 [VGA])
Subsystem: ABIT Computer Corp.: Unknown device 6109
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 137
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at efff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=16 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
FW- Rate=x4
02:04.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: ASUSTeK Computer Inc. CMI8738 6-channel audio controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 145
Region 0: I/O ports at b800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC
Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 153
Region 0: I/O ports at b400 [size=128]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at efd00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:06.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 145
Region 0: I/O ports at b000 [size=128]
Region 1: Memory at eb800000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at efd20000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. PCI-USB2 (OHCI subsystem)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 161
Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. PCI-USB2 (OHCI subsystem)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 10500ns max), Cache Line Size 08
Interrupt: pin B routed to IRQ 137
Region 0: Memory at ea800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. PCI-USB2 (EHCI subsystem)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size 10
Interrupt: pin C routed to IRQ 145
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
Quoted 4 lines · Fabio d'Alessi
Dear sirs,
I have a problem with a dual athlon xp running fedora/4 with the 2.6.14-1 kernel. Hard locks. Please if anyone
[...]
Quoted 3 lines
[7.1] standard fedora 4 install - nothing new added, just the drivers for the nv graphic board.
Adding the binary only nvidia module is not a little thing. That driver is a closed source binary blob that noone here has a chance to debug.
You can switch to the 'nv' driver and see if you still have the problem. The nv driver won't give you accelerated 3D, but for 2D it should work just fine.
[...]
Quoted 1 line
nvidia 4095984 12 - Live
0xf8f31000
[...]
Please try to reproduce without the nvidia driver ever being loaded - just unloading it is *not* good enough, it needs to have never been loaded at all.
As long as that (or any other binary-only module for that matter) has been loaded into the kernel for just a second it's impossible to say if that module or some other part of the kernel is the cause of the problem.
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Quoted 5 lines · Jesper Juhl
Quoted 3 lines · Fabio d'Alessi
Dear sirs,
I have a problem with a dual athlon xp running fedora/4 with the 2.6.14-1 kernel. Hard locks. Please if anyone
Quoted 8 lines
[...]
Quoted 2 lines
[7.1] standard fedora 4 install - nothing new added, just the drivers for the nv graphic board.
Adding the binary only nvidia module is not a little thing. That driver is a closed source binary blob that noone here has a chance to debug.
I suggest also if you want the kernel guys to help debug your problem, and not your distributor, that you upgrade to at least 2.6.15.2 and confirm the fault still exists.
Of course, Jesper is 100% correct about binary modules.
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Jesper,
okay I will see if I can resolve this issue by removing the module (and, obviously, making it so that it does not get loaded at all). One more thing I noticed way up in the message log (hadn't noticed them at first):
Feb 2 15:32:53 telethon ainit: Memory: Failed to release semaphore Feb 2 15:32:53 telethon ainit: Error: No such file or directory Feb 2 15:32:53 telethon ainit: Memory: Failed to release SHM segment Feb 2 15:32:53 telethon ainit: Error: No such file or directory Feb 2 15:32:53 telethon ainit: Memory: Failed to release SHM segment Feb 2 15:32:53 telethon ainit: Error: No such file or directory Feb 2 15:32:53 telethon ainit: No such file or directory Feb 2 15:32:53 telethon ainit: Memory: Failed to release semaphore Feb 2 15:32:53 telethon ainit: Error: No such file or directory Feb 2 15:32:53 telethon ainit: Memory: Failed to release SHM segment Feb 2 15:32:53 telethon ainit: Error: No such file or directory Feb 2 15:32:53 telethon ainit: Memory: Failed to release SHM segment Feb 2 15:32:53 telethon ainit: Error: No such file or directory Feb 2 15:32:53 telethon ainit: No such file or directory
looked it up on google and it seems to be related to a bug that causes the kernel to lock under various circumstances, see http://lkml.org/lkml/2006/1/12/282
I wonder if it's related to the hardlock I'm having here.
Thanks again for the kind feedback.
fda
Quoted 33 lines · Jesper Juhl
Quoted 3 lines · Fabio d'Alessi
Dear sirs,
I have a problem with a dual athlon xp running fedora/4 with the 2.6.14-1 kernel. Hard locks. Please if anyone[...]
Quoted 3 lines
[7.1] standard fedora 4 install - nothing new added, just the drivers for the nv graphic board.
Adding the binary only nvidia module is not a little thing. That driver is a closed source binary blob that noone here has a chance to debug.
You can switch to the 'nv' driver and see if you still have the problem. The nv driver won't give you accelerated 3D, but for 2D it should work just fine.
[...]
Quoted 1 line
nvidia 4095984 12 - Live
0xf8f31000[...]
Please try to reproduce without the nvidia driver ever being loaded - just unloading it is *not* good enough, it needs to have never been loaded at all.
As long as that (or any other binary-only module for that matter) has been loaded into the kernel for just a second it's impossible to say if that module or some other part of the kernel is the cause of the problem.--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html