vgchange -an question with disconnected disks
I have a question regarding the behavior of vgchange -a n on lvm2 when there are disk failures. Specifically the following:
1. vgchange -a y vg00
2. disconnect the disks
3. vgchange -a n vg00
Now this fails with many messages, such as:
[root@harris ~]# vgchange -a n vg00
/dev/sda1: read failed after 0 of 4096 at 0: Input/output error /dev/sdb1: read failed after 0 of 4096 at 0: Input/output error /dev/sdb2: read failed after 0 of 4096 at 0: Input/output error /dev/sdc1: read failed after 0 of 4096 at 0: Input/output error /dev/sda: read failed after 0 of 1024 at 0: Input/output error /dev/sda: read failed after 0 of 1024 at 312475648: Input/output error /dev/sda: read failed after 0 of 2048 at 0: Input/output error /dev/sda1: read failed after 0 of 4096 at 1966080: Input/output error /dev/sda1: read failed after 0 of 4096 at 0: Input/output error /dev/sda2: read failed after 0 of 4096 at 310312960: Input/output error /dev/sda2: read failed after 0 of 4096 at 0: Input/output error /dev/sdb: read failed after 0 of 1024 at 0: Input/output error /dev/sdb: read failed after 0 of 1024 at 312475648: Input/output error /dev/sdb: read failed after 0 of 2048 at 0: Input/output error /dev/sdb1: read failed after 0 of 4096 at 1966080: Input/output error /dev/sdb1: read failed after 0 of 4096 at 0: Input/output error /dev/sdb2: read failed after 0 of 4096 at 310312960: Input/output error /dev/sdb2: read failed after 0 of 4096 at 0: Input/output error /dev/sdc: read failed after 0 of 1024 at 0: Input/output error /dev/sdc: read failed after 0 of 1024 at 16384000: Input/output error /dev/sdc: read failed after 0 of 2048 at 0: Input/output error /dev/sdc1: read failed after 0 of 4096 at 16318464: Input/output error /dev/sdc1: read failed after 0 of 4096 at 0: Input/output error Unable to find volume group "vg00"
[root@harris ~]#
This the vg is not deactivated. Now this is different behavior that with lvm1 which would just proceed as normal. My question is that is there a way to force the deactivation to occur in this case?
Thanks!
Signature · 5 lines
=========== John DeFranco Hewlett Packard Company [email protected] Availability Clusters Solution Lab phone: 408 447-7543 19111 Pruneridge Ave., M/S 4101 fax: 408 447-0056 Cupertino, CA 95014
Quoted 2 lines · John DeFranco
My question is that is there a
way to force the deactivation to occur in this case?
Not from lvm2 unless you restore the metadata from a backup first.
To remove the logical volumes from the kernel, use 'dmsetup'. List what's there: dmsetup info -c
*After* ensuring the open count is 0, remove individually with 'dmsetup remove' or all at once with 'dmsetup remove_all'.
Alasdair
Signature · 1 line
[email protected]
Quoted 5 lines · John DeFranco
I have a question regarding the behavior of vgchange -a n on lvm2 when there are disk failures. Specifically the following:
1. vgchange -a y vg00
2. disconnect the disks
3. vgchange -a n vg00
Are you doing this in the correct order? Shouldn't you _de_activate the VG _before_ removing the disks? And besides, shouldn't you remove the offending disks from the VG _before_ deactivating and then removing the disks physically? Or at least something equivalent.
1. vgreduce vg00 <offending disks> 2. vgchange -a n vg00 3. disconnect the disks 4. vgchange -a y vg00
...
Peter
Actually I was not asking this question in the context removing a disk. I was asking if you loose connectivity to a disk(s) unexpectitly.
Quoted 24 lines · Peter Smith
Quoted 5 lines · John DeFranco
I have a question regarding the behavior of vgchange -a n on lvm2 when there are disk failures. Specifically the following:
1. vgchange -a y vg00
2. disconnect the disks
3. vgchange -a n vg00Are you doing this in the correct order? Shouldn't you
_de_activatethe VG _before_ removing the disks? And besides, shouldn't you remove the offending disks from the VG _before_ deactivating and then removing the disks physically? Or at least something equivalent.1. vgreduce vg00 <offending disks> 2. vgchange -a n vg00 3. disconnect the disks 4. vgchange -a y vg00...
Peter
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Signature · 3 lines
=========== Cheers -jd