EVMS & SATA failure
Hi,
Trying to recover from a disk failure [1], we:
- installed a fresh ubuntu 5.10 (modified kernel 2.6.12) on a new disk
- stopped machine
- connected failing SATA disk to board (in order to try to recover some data)
- rebooted
That doesn't work at all:
* Setting up LVM Volumne Groups
* Starting Enterprise Volume Management System...
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 1
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 2
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 3
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 4
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 5
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 6
....
And the boot doesn't go further, the error messages keep looping from block 0 to 12.
As I am trying to minimize my number of reboots (to not stress my failing disk), maybe someone has an idea what those messages could mean? Is that due to my failing disk? Is it some sort of SATA configuration issue? Or is there an EVMS issue?
Otherwise I will prevent the EVMS daemon from starting at boot and see if that fixes my issue.
Cheers,
Jerome
Looks to me like those are IO errors caused by the defective disk. That appears to confuse Ubuntu's init scripts when they try to detect the EVMS stuff, and it goes into an infinite loop retrying instead of giving up. You should probably report this bug to Ubuntu.
Quoted 42 lines · jerome lacoste
Hi,
Trying to recover from a disk failure [1], we:
- installed a fresh ubuntu 5.10 (modified kernel 2.6.12) on a new disk
- stopped machine
- connected failing SATA disk to board (in order to try to recover some data)
- rebootedThat doesn't work at all:
* Setting up LVM Volumne Groups
* Starting Enterprise Volume Management System...
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 1
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 2
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 3
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 4
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 5
ata4: translated ATA stat/err 0x25/00 to SCSI SK/ASC Buffer I/O error on device dm-3, logical block 6
....And the boot doesn't go further, the error messages keep looping from block 0 to 12.
As I am trying to minimize my number of reboots (to not stress my failing disk), maybe someone has an idea what those messages could mean? Is that due to my failing disk? Is it some sort of SATA configuration issue? Or is there an EVMS issue?
Otherwise I will prevent the EVMS daemon from starting at boot and see if that fixes my issue.
Cheers,
Jerome