Skip to contentSkip to conversation

Newbie: ACPI dsdt.dsl Compilation Error

DISCUSSION Johannes Becker 1 participant 1 message Feb 9, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

Hi,

Hi,

OS: openSUSE 10.0

I've got a Medion MD40100 Notebook. It has a Intel Mobile Pentium 4 2,8 GHz.

I think my ACPI isn't running right. The FAN is running constantly at a high level, can't set trip_points, etc..
Searching for the error I found this in ACPI-Watch

Code:
acpi watch 0.75
(C) 2002 Oliver Diedrich

System information

System:   (null) (null) ((null)); serial #: (null)
BIOS:   (null) (null) ((null))
Board:   (null) (null) ((null)); serial #: (null)
CPU:   (null) Mobile Intel(R) Pentium(R) 4     CPU 2.80GHz, 2793 MHz
RAM:   896 MByte
Kernel:   Linux 2.6.13-15.7-default for i686 (build #1 Tue Nov 29

14:32:29 UTC 2005)
ACPI: release 20050408

ACPI related syslog messages:

...

/proc/acpi/fan

/proc/acpi/thermal_zone/THM0/polling_frequency
( 2/09/06 2:07:40) polling frequency: 2 seconds

/proc/acpi/thermal_zone/THM0/cooling_mode

( 2/09/06  2:07:40)   <setting not supported>
( 2/09/06  2:07:40)   cooling mode:   critical

/proc/acpi/thermal_zone/THM0/trip_points
( 2/09/06 2:07:40) critical (S5): 90 C

/proc/acpi/thermal_zone/THM0/temperature
( 2/09/06 2:07:40) temperature: 44 C
...

/proc/acpi/thermal_zone/THM0/state
( 2/09/06 2:07:40) state: ok

...

/proc/acpi/event
( 2/09/06 2:07:40) ### read error ###

/proc/acpi/fadt
( 2/09/06 2:07:40) ### read error ###

/proc/acpi/dsdt
( 2/09/06 2:07:40) ### read error ###

/proc/acpi/info
( 2/09/06 2:07:40) version: 20050408
...

So the dsdt can't be read (because it's probably broken. Following the instructions from a page
(http://lists.suse.com/archive/suse-laptop/2005-Jan/0273.html) I did the following in the command line:

1) cp /proc/acpi/dsdt /tmp
2) cd /tmp
3) iasl -d dsdt
4) iasl -sa dsdt.dsl

Now I get 6 errors on point 4):

linux:/tmp # iasl -sa dsdt.dsl

Intel ACPI Component Architecture
ASL Optimizing Compiler version 20050902 [Sep 9 2005] Copyright (C) 2000 - 2005 Intel Corporation Supports ACPI Specification Revision 3.0

dsdt.dsl 193: Field (PORT, WordAcc, NoLock, Preserve)
Error 1025 - ^ Access width is greater than region size

dsdt.dsl 195: P80H, 8
Error 1026 - ^ Access width of Field Unit extends beyond
region limit

dsdt.dsl 1010: Field (EVGR, DWordAcc, NoLock, Preserve)
Error 1025 - ^ Access width is greater
than region size

dsdt.dsl 1012: EVID, 16
Error 1026 - ^ Access width of Field Unit
extends beyond region limit

dsdt.dsl 3304: While (Local1)
Error 1048 - ^ Method local
variable is not initialized (Local1)

dsdt.dsl 4952: Method (_WAK, 1, NotSerialized)
Warning 2078 - ^ Reserved method must return a value (_WAK)

dsdt.dsl 4977: Store (\TRAW (), Local0)
Error 1058 - ^ Called method returns no value

ASL Input: dsdt.dsl - 4988 lines, 173086 bytes, 2311 keywords Compilation complete. 6 Errors, 1 Warnings, 0 Remarks, 492 Optimizations

Since I'm a newbie and these errors don't tell me nothing:
Can anybody help me correct these errors?

Cheers
Jonny

begin:vcard
fn:Johannes Becker
n:Becker;Johannes adr;quoted-printable:;;Theresienstr.27;M=C3=BCnchen;Bayern;80333;Deutschland email;internet:[email protected]
tel;home:+498950005858
tel;cell:+491774566435
x-mozilla-html:FALSE
version:2.1
end:vcard