Skip to contentSkip to conversation

SATA on mptsas performance

DISCUSSION Mirko Benz 1 participant 1 message Feb 13, 2006 SCSI

lore
Share & tools
lore

Mirko Benz

author
#0 lore raw

Hello,

We are testing the following setup:
- LSI SAS3442X controller
- Promise J300S SAS JBOD connected via the external port of the SAS controller
- 10 SATA disks (Seagate) in the JBOD
- Linux kernel 2.6.16RC2 on a INTEL Dual Xeon Server, 2.8 Ghz, 64 bit mode

LSI SAS driver provided by the kernel finds the JBOD and the disks.
Single disk performance is like attaching via a SATA controller from the chipset. Testing with multiple parallel drive accesses gives very poor results and high system utilisation. Tests performed with parallel invocations of dd with bs=32k. Values in MB/s.

# of disks    READ    AVG    WRITE        AVG
1    60    60,0    58    58,0
5    310    62,0    288    57,6
6    344    57,3    336    56,0
7    259    37,0    375    53,6
8    226    28,3    391    48,9
9    245    27,2    402    44,7
10    265    26,5    405    40,5

Up to 5 drives it looks as it should. Then the performance goes significantly down for READ operations. The card is plugged in a 100 MHz PCI-X slot. No other activity on the system.

Any hint?

Thanks,
Mirko