Skip to contentSkip to conversation

Missing PSB or _PSS in BIOS

DISCUSSION Vince 2 participants 2 messages Feb 19, 2006 – Feb 20, 2006 ACPI

lore
Share & tools
lore

Vince

author
#0 lore raw

Hello,

I'm using an opteron 165 (dual-core) which frequency/voltage should be able to be scaled, but unfortunately the latest BIOS for my motherboard lacks the frequency transition tables needed by powernow-k8.c

as shown by the boot message:
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: BIOS error - no PSB or ACPI _PSS objects

Would it be possible to write suitable ACPI _PSS from AMD processor documentation ? Or take the infos from some other ACPI BIOS which has support, and put it in mine ?

And use the "ACPI load custom DSDT" kernel option to get the patched one used by the powernow-k8 driver ?

I found a lot of infos about fixing glitches in DSDT but could not find anything about adding missing _PSS entries...

Would that be dangerous ?

Is there something else I could do ?
I don't think I'll get an answer from the vendor, even if I tried...

Please, keep me on the CC list

Signature · 1 line
Vincent Legoll
#1 lore raw
Quoted 19 lines · Vince

Hello,

I'm using an opteron 165 (dual-core) which frequency/voltage should be able to be scaled, but unfortunately the latest BIOS for my motherboard lacks the frequency transition tables needed by powernow-k8.c

as shown by the boot message:
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: BIOS error - no PSB or ACPI _PSS objects

Would it be possible to write suitable ACPI _PSS from AMD processor documentation ?
Or take the infos from some other ACPI BIOS which has support, and put it in mine ?

And use the "ACPI load custom DSDT" kernel option to get the patched one used by the
powernow-k8 driver ?

Quoted 9 lines

I found a lot of infos about fixing glitches in DSDT but could not find anything
about adding missing _PSS entries...

Would that be dangerous ?

Is there something else I could do ?
I don't think I'll get an answer from the vendor, even if I tried...

First, check if 'Cool'n Quiet' is enabled in the bios. Second, if that do not work, try to upgrade your bios. I had a similar problem with a HP Proliant 385, and after upgrading it was (almost) ok (they just forgot one p-state, but it was easy to add it afterward).

Signature · 4 lines
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.