what's the problem of DNAT
I use '/sbin/iptables -t nat -A PREROUTING -d InternetAddr -p tcp
--dport 80 -j DNAT --to 192.168.16.100:8087' it can work, but if I use 8087 instead of 80,like follows:/sbin/iptables -t nat -A PREROUTING -d InternetAddr -p tcp --dport 8087 -j DNAT --to 192.168.16.100:8087 then it can't work. what's wrong with it ?
It's really strange, please HELP me
I've checked and I'm sure that no rules was set to forbidden access to that ports.
2005/10/31, Buddy wu <[email protected]>:
Quoted 7 lines
I use '
/sbin/iptables-t nat -A PREROUTING -d InternetAddr -p tcp
--dport 80 -j DNAT --to 192.168.16.100:8087' it can work, but if I use 8087 instead of 80,like follows:/sbin/iptables-t nat -A PREROUTING -d InternetAddr -p tcp --dport 8087 -j DNAT --to 192.168.16.100:8087 then it can't work. what's wrong with it ?
Quoted 6 lines · Buddy wu
I use '
/sbin/iptables-t nat -A PREROUTING -d InternetAddr -p tcp
--dport 80 -j DNAT --to 192.168.16.100:8087' it can work, but if I use 8087 instead of 80,like follows:/sbin/iptables-t nat -A PREROUTING -d InternetAddr -p tcp --dport 8087 -j DNAT --to 192.168.16.100:8087 then it can't work. what's wrong with it ?
Any other rules in PREROUTING on port 80?
iptables-save -t nat
Regards
Henrik
Quoted 3 lines
Any other rules in PREROUTING on port 80?
iptables-save -t nat
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 6100 -j DNAT --to-destination 192.168.16.21:6100
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.16.114:80
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 20 -j DNAT --to-destination 192.168.16.114:20
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 8081 -j DNAT --to-destination 192.168.16.100:8081
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 8082 -j DNAT --to-destination 192.168.16.100:8082
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 8085 -j DNAT --to-destination 192.168.16.100:8085
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 8083 -j DNAT --to-destination 192.168.16.100:8083
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 8087 -j DNAT --to-destination 192.168.16.100:8087
these are the rules in PREROUTING. the Inet1 replaced for the internet address. Now it only can connect to Inet1:80 through the internet. and others like :Inet1:8083 can't be accessed.
It worked months ago . but now it don't work anyway
Quoted 4 lines · Buddy wu
(quoted diff) +0
-4-A PREROUTING -d Inet1 -p tcp -m tcp --dport 6100 -j DNAT --to-destination 192.168.16.21:6100 -A PREROUTING -d Inet1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.16.114:80
...
Quoted 7 lines
-A PREROUTING -d Inet1 -p tcp -m tcp --dport 8087 -j DNAT --to-destination 192.168.16.100:8087
these are the rules in PREROUTING. the Inet1 replaced for the internet address. Now it only can connect to Inet1:80 through the internet. and others like :Inet1:8083 can't be accessed.
It worked months ago . but now it don't work anyway
Has anything changed in the FORWARD chain ? You need to allow it there.
Gr,
Rob
Quoted 2 lines
Has anything changed in the FORWARD chain ? You need to allow it there.
follows are FORWARD chain. I think I DROP nothing except in the list. I HAVE modified the policy of FORWARD chain to ACCEPT. that's why i'm puzzled.
Chain FORWARD (policy ACCEPT)
target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 ipp2p v0.8.0_rc3 --ipp2p ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 192.168.20.90 192.168.8.66 tcp dpts:137:445 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:137:139 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5554 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:1433:1444 DROP all -- 0.0.0.0/0 202.101.43.60 DROP all -- 0.0.0.0/0 202.101.43.67 DROP all -- 0.0.0.0/0 202.101.43.57
And there is another Interest thing (I'm pained with the "interesting thing") where I use 'sbin/iptables -t nat -A PREROUTING -d Inet2 -p tcp --dport 8087 -j DNAT --to 192.168.16.100:8087' rule, I can access
http://Inet2:8087 in the LAN, but I can't access http://Inet2:8087
through Internet(I have a machine direct access to internet)
when turn to use 'sbin/iptables -t nat -A PREROUTING -d Inet2 -p tcp --dport 80 -j DNAT --to 192.168.16.100:8087' then I can access
http://Inet2:80 in the LAN, and both can access http://Inet2:80 in Internet... that's the thing i had meet
Quoted 5 lines · Buddy wu
And there is another Interest thing (I'm pained with the "interesting thing") where I use 'sbin/iptables -t nat -A PREROUTING -d Inet2 -p tcp --dport 8087 -j DNAT --to 192.168.16.100:8087' rule, I can access
http://Inet2:8087 in the LAN, but I can't access http://Inet2:8087
through Internet(I have a machine direct access to internet)
Please verify the routing on 192.168.16.100. To me the data you have indicates 192.168.16.100 does not have correct routing for the Internet. From what I have seen the iptables rules is correct, but all your rules with NAT to 192.168.16.100 is failing.
Quite likely the NAT and firewall rules as such is working just fine, but 192.168.16.100 does not know what to do with the return traffic.
Regards
Henrik