Create a Logical volume with 100% of Volume groups size?
Hi everybody!
we only want to use LVM with one Logical volume, and want to use the 100% of available space.
is there any way to create it? Look:
acrol ~ # vgdisplay
--- Volume group ---
VG Name mirror
[...]
VG Size 232.88 GB PE Size 32.00 MB Total PE 7452 Alloc PE / Size 7452 / 232.88 GB Free PE / Size 0 / 0
[...]
acrol ~ # lvcreate -L232.88G -nlv00 mirrorPoe
Rounding up size to full physical extent 232.91 GB Insufficient free extents (7452) in volume group mirrorPoe: 7453 required
How to use all the 7452 PE? Thanks in advance
Best regards!
Signature · 15 lines
------------------------------------------------------------------------
* Alejandro Alfonso Fern�ndez
Dpto de Sistemas. �rea Corporativa *
[email protected] <mailto:[email protected]>
http://www.telecyl.com/
Proci�n 7, Portales 1-2 Edificio Am�rica II
28023 Madrid
Tfn: 91 452 18 00 - Fax: 91 452 18 08 Juan Garc�a Hortelano, 43
Edificio Telecyl
47014 Valladolid
Tfn: 983 428 200 - Fax: 983 428 223
------------------------------------------------------------------------Quoted 15 lines · Alejandro Alfonso
Hi everybody!
we only want to use LVM with one Logical volume, and want to use the 100% of available space.
is there any way to create it? Look:acrol ~ # vgdisplay
--- Volume group ---
VG Name mirror
[...]VG Size 232.88 GB PE Size 32.00 MB Total PE 7452 Alloc PE / Size 7452 / 232.88 GB Free PE / Size 0 / 0
Quoted 7 lines
[...]
acrol ~ # lvcreate -L232.88G -nlv00 mirrorPoe
Rounding up size to full physical extent 232.91 GB Insufficient free extents (7452) in volume group mirrorPoe: 7453 requiredHow to use all the 7452 PE? Thanks in advance
lvcreate -l7452 -nlv00 mirrorPoe
see man lvcreate
Signature · 1 line
patrick
Thanks Patrick!
promise i've read the man but dosen't understand Logical Extents concept :)
Best regards!
Quoted 26 lines
Quoted 13 lines
we only want to use LVM with one Logical volume, and want to use the 100% of available space.
is there any way to create it? Look:acrol ~ # vgdisplay
--- Volume group ---
VG Name mirror
[...]VG Size 232.88 GB PE Size 32.00 MB Total PE 7452 Alloc PE / Size 7452 / 232.88 GB Free PE / Size 0 / 0Quoted 8 lines
[...]
acrol ~ # lvcreate -L232.88G -nlv00 mirrorPoe
Rounding up size to full physical extent 232.91 GB Insufficient free extents (7452) in volume group mirrorPoe: 7453 requiredHow to use all the 7452 PE? Thanks in advance
lvcreate -l7452 -nlv00 mirrorPoe
see man lvcreate
Signature · 15 lines
------------------------------------------------------------------------
* Alejandro Alfonso Fern�ndez
Dpto de Sistemas. �rea Corporativa *
[email protected] <mailto:[email protected]>
http://www.telecyl.com/
Proci�n 7, Portales 1-2 Edificio Am�rica II
28023 Madrid
Tfn: 91 452 18 00 - Fax: 91 452 18 08 Juan Garc�a Hortelano, 43
Edificio Telecyl
47014 Valladolid
Tfn: 983 428 200 - Fax: 983 428 223
------------------------------------------------------------------------[linux-lvm] Flushing a device
Hi,
I have a question regarding how to ensure that all data is flushed to a logical volume before a snapshot is taken. The exact scenario is as follows:
I have the logical volume "/dev/mapper/userfiles" which is formatted with Reiser3. The volume has been created using "dmsetup ... crypt ..." on top of a logical volume "/dev/storage/cryptdisk".
My aim is to be able to write a set of files to the "/dev/mapper/userfiles" volume, then take a snapshot of the "/dev/storage/cryptdisk" as a backup, knowing that the contents of the backup are encrypted.
I don't have a problem setting up the above scenario or creating the snapshot volume, but I want to be sure that the files I have written will be in the backup. My concern is that if all file writes have not been flushed through all the layers of LVM then I will not get all the files in the snapshot of then encrypted volume. I have tried issuing the "sync" command, but I am not confident that this has worked.
Is it necessary to forcibly flush the data through each layer of the above volume "stack" so that I know it is all on the snapshot, or is this taken care of automatically when the snapshot command is issued and I am just being paranoid...
Thanks,
Roger.