OMAP3
OMAP 1710 H3 USB g_ether Problem
Hi,
I have a OMAP 1710 H3 board. I loaded it with Linux 2.6.15 + latest
omap patch. Loading the kernel shows no problem.
My g_ether options is following:
-------------------------------------------------------------
# USB Gadget Support
#CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not setCONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not setCONFIG_USB_GADGET_OMAP=yCONFIG_USB_OMAP=y
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not setCONFIG_USB_ETH=mCONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
---------------------------------------------------------------
When I modprobe the g_ether it shows
------------------------------------------------------------
Using /lib/modules/2.6.15-omap1/kernel/drivers/usb/gadget/g_ether.ko
usb0: Ethernet Gadget, version: May Day 2005
usb0: using omap_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep3in-int
usb0: MAC d2:4d:8a:2d:38:ce
usb0: HOST MAC 00:dc:c8:f7:75:05
usb0: RNDIS ready
otg: b_idle, SWITCH to gadget, ctrl 098021isp1301_omap 0-002d: ready for dual-role USB ...
-------------------------------------------------------------
Everything seems fine. Then I use USB cable to connect the board to another Linux box. The linux box recognize it as a ethernet device. After simple network configration, I ping the board from linux box and the board hang.
Anyone have the same problem? I have try this feature with other latest Linux kernel + omap patch and they all have the same problem.
Regards,
Yuh-Jye