Skip to contentSkip to conversation

Problem with a CD

DISCUSSION Robert Hancock 1 participant 1 message Mar 12, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 16 lines · [email protected] wrote:

I have error messages in my logs:
on computer #1, they look like:

|hdc: command error: status=0x51 { DriveReady SeekComplete Error }
|hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
|ide: failed opcode was: unknown
|end_request: I/O error, dev hdc, sector 5008
|Buffer I/O error on device hdc, logical block 1252

on computer #2, they are simpler:
|end_request: I/O error, dev sr0, sector 5008 |Buffer I/O error on device sr0, logical block 1252

On both computers, I have the errors on the same sectors/blocks.

For the two offending files, the errors already occur on the beginings of the files.

Quoted 6 lines

Of course, all of this point to a defective CD, except that on both computers, I can read the files without any problem with windows XP (well, actually, I have only read avseq01.dat, which is a video file. I haven't tried the other troublesome file.)

What could be the problem ?

This is a VCD, right? Those use Mode 2 Form 2 which has weak error correction (like an audio CD). It's possible the drive is returning read errors and WinXP is ignoring the errors because it's a VCD, and Linux is not..

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/