Skip to contentSkip to conversation

build: remove compatibility build defines

PATCH In review Bruce Richardson 2 participants 3 messages Dec 9, 2020 – Jan 20, 2021

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 build: remove compatibility build defines

As announced in the deprecation note, remove all compatibility build defines from previous make/meson versions and use only the standardized ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.

---
 config/meson.build                    |   2 +-
 config/rte_compatibility_defines.h    | 129 --------------------------
 config/rte_config.h                   |   1 -
 doc/guides/rel_notes/deprecation.rst  |   8 --
 drivers/baseband/meson.build          |   2 -
 drivers/bus/meson.build               |   1 -
 drivers/common/meson.build            |   1 -
 drivers/common/mlx5/meson.build       |   1 -
 drivers/common/qat/meson.build        |   2 -
 drivers/compress/meson.build          |   1 -
 drivers/compress/octeontx/meson.build |   1 -
 drivers/crypto/meson.build            |   1 -
 drivers/crypto/null/meson.build       |   1 -
 drivers/crypto/octeontx/meson.build   |   1 -
 drivers/crypto/octeontx2/meson.build  |   1 -
 drivers/crypto/scheduler/meson.build  |   1 -
 drivers/crypto/virtio/meson.build     |   1 -
 drivers/event/meson.build             |   1 -
 drivers/mempool/meson.build           |   1 -
 drivers/meson.build                   |  23 -----
 drivers/net/meson.build               |   1 -
 drivers/raw/meson.build               |   1 -
 drivers/regex/meson.build             |   1 -
 drivers/regex/mlx5/meson.build        |   1 -
 drivers/regex/octeontx2/meson.build   |   1 -
 drivers/vdpa/meson.build              |   1 -
 drivers/vdpa/mlx5/meson.build         |   1 -
 lib/meson.build                       |   3 +-
 28 files changed, 2 insertions(+), 188 deletions(-)
 delete mode 100644 config/rte_compatibility_defines.h
config/meson.build +1 -1
index a3154e29c..3ddcc3539 100644
@@ -256,7 +256,7 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-install_headers(['rte_config.h', 'rte_compatibility_defines.h'],
+install_headers(['rte_config.h'],
 		subdir: get_option('include_subdir_arch'))
 
 # enable VFIO only if it is linux OS
config/rte_compatibility_defines.h deleted +0 -129

129 lines not on this page · raw message

config/rte_config.h +0 -1
index a0b5160ff..b778114e1 100644
@@ -13,7 +13,6 @@
 #define _RTE_CONFIG_H_
 
 #include <rte_build_config.h>
-#include "rte_compatibility_defines.h"
 
 /* legacy defines */
 #ifdef RTE_EXEC_ENV_LINUX
doc/guides/rel_notes/deprecation.rst +0 -8
index 2f498a0be..cbb0b4ebb 100644
@@ -11,14 +11,6 @@ here.
 Deprecation Notices
 -------------------
 
-* build: The macros defined to indicate which DPDK libraries and drivers
-  are included in the meson build are changing to a standardized format of
-  ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the
-  upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the
-  upper-case name of the device class to which a driver belongs e.g.
-  ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be
-  removed in a future release.
-
 * kvargs: The function ``rte_kvargs_process`` will get a new parameter
   for returning key match count. It will ease handling of no-match case.
 
drivers/baseband/meson.build +0 -2
index 2c7efe394..920e3b02e 100644
@@ -6,5 +6,3 @@ if is_windows
 endif
 
 drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec', 'acc100']
-
-config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
drivers/bus/meson.build +0 -1
index bd73efd18..2e7727af0 100644
@@ -3,4 +3,3 @@
 
 drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus']
 std_deps = ['eal']
-config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
drivers/common/meson.build +0 -1
index d78882f05..ba6325adf 100644
@@ -7,4 +7,3 @@ endif
 
 std_deps = ['eal']
 drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx']
-config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
drivers/common/mlx5/meson.build +0 -1
index 3dacc6f68..ef8d79b09 100644
@@ -7,7 +7,6 @@ if not is_linux
 	subdir_done()
 endif
 
-config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
 deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs']
 sources += files(
 	'mlx5_devx_cmds.c',
drivers/common/qat/meson.build +0 -2
index 29e1299f2..7dd80cc53 100644
@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017-2018 Intel Corporation
 
-config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
-
 qat_crypto = true
 qat_crypto_path = 'crypto/qat'
 qat_crypto_relpath = '../../' + qat_crypto_path
drivers/compress/meson.build +0 -1
index 33f5e33dd..cd96def08 100644
@@ -8,4 +8,3 @@ endif
 drivers = ['isal', 'octeontx', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
drivers/compress/octeontx/meson.build +0 -1
index 2d71b4da2..e1b7bed42 100644
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Cavium, Inc
 
-fmt_name = 'octeontx_compress'
 sources = files('otx_zip.c', 'otx_zip_pmd.c')
 includes += include_directories('include')
 deps += ['mempool_octeontx', 'bus_pci']
drivers/crypto/meson.build +0 -1
index 34f2d99c0..c927c5f8d 100644
@@ -26,4 +26,3 @@ drivers = ['aesni_gcm',
 	   'zuc']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
drivers/crypto/null/meson.build +0 -1
index 421414916..1f7d644de 100644
@@ -2,5 +2,4 @@
 # Copyright(c) 2017 Intel Corporation
 
 deps += 'bus_vdev'
-fmt_name = 'null_crypto'
 sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c')
drivers/crypto/octeontx/meson.build +0 -1
index 88c812d3f..a353d37a1 100644
@@ -7,7 +7,6 @@ endif
 
 deps += ['bus_pci']
 deps += ['common_cpt']
-fmt_name = 'octeontx_crypto'
 
 sources = files('otx_cryptodev.c',
 		'otx_cryptodev_capabilities.c',
drivers/crypto/octeontx2/meson.build +0 -1
index 0aad4e9a1..283818e5d 100644
@@ -13,7 +13,6 @@ deps += ['common_octeontx2']
 deps += ['ethdev']
 deps += ['eventdev']
 deps += ['security']
-fmt_name = 'octeontx2_crypto'
 
 sources = files('otx2_cryptodev.c',
 		'otx2_cryptodev_capabilities.c',
drivers/crypto/scheduler/meson.build +0 -1
index 2209c5023..b67d9306e 100644
@@ -2,7 +2,6 @@
 # Copyright(c) 2018 Luca Boccassi <[email protected]>
 
 deps += ['bus_vdev', 'reorder']
-fmt_name = 'crypto_scheduler'
 sources = files(
 	'rte_cryptodev_scheduler.c',
 	'scheduler_failover.c',
drivers/crypto/virtio/meson.build +0 -1
index 6cea782de..20e9e9551 100644
@@ -3,6 +3,5 @@
 
 includes += include_directories('../../../lib/librte_vhost')
 deps += 'bus_pci'
-fmt_name = 'virtio_crypto'
 sources = files('virtio_cryptodev.c', 'virtio_pci.c',
 		'virtio_rxtx.c', 'virtqueue.c')
drivers/event/meson.build +0 -1
index c1a6990a0..a49288a5d 100644
@@ -12,4 +12,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 	drivers += 'octeontx'
 endif
 std_deps = ['eventdev', 'kvargs']
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
drivers/mempool/meson.build +0 -1
index a6ddd35b2..4428813da 100644
@@ -3,4 +3,3 @@
 
 drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack']
 std_deps = ['mempool']
-config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
drivers/meson.build +0 -23
index f9febc579..77f65fa90 100644
@@ -32,7 +32,6 @@ endif
 foreach subpath:subdirs
 	drivers = []
 	std_deps = []
-	config_flag_fmt = '' # format string used to set the value in dpdk_conf
 
 	# subpath can be either "class" or "class/driver"
 	if subpath.contains('/')
@@ -58,7 +57,6 @@ foreach subpath:subdirs
 		build = true # set to false to disable, e.g. missing deps
 		reason = '<unknown reason>' # set if build == false to explain
 		name = drv
-		fmt_name = ''
 		sources = []
 		headers = []
 		objs = []
@@ -114,27 +112,6 @@ foreach subpath:subdirs
 			lib_name = '_'.join(['rte', class, name])
 			dpdk_conf.set(lib_name.to_upper(), 1)
 
-			if fmt_name == ''
-				fmt_name = name
-			endif
-
-			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro
-			# for driver compatibility, since we changed the
-			# default to match that of make. Remove in future release
-			# after following deprecation process
-			if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto'
-					or class == 'compress'
-					or class == 'event')
-				alt_flag_fmt = '_@0@_PMD'.join(
-						config_flag_fmt.split('_PMD_@0@'))
-				if config_flag_fmt.contains('EVENTDEV')
-					alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join(
-						config_flag_fmt.split('_PMD_@0@_EVENTDEV'))
-				endif
-				dpdk_conf.set(alt_flag_fmt.format(
-						fmt_name.to_upper()), 1)
-			endif
-
 			dpdk_extra_ldflags += pkgconfig_extra_libs
 
 			install_headers(headers)
drivers/net/meson.build +0 -1
index 29f477750..19960edf7 100644
@@ -59,4 +59,3 @@ drivers = ['af_packet',
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 std_deps += ['bus_pci']         # very many PMDs depend on PCI, so make std
 std_deps += ['bus_vdev']        # same with vdev bus
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
drivers/raw/meson.build +0 -1
index d8d6cf582..8c3a036df 100644
@@ -11,4 +11,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma',
 	'octeontx2_ep',
 	'skeleton']
 std_deps = ['rawdev']
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
drivers/regex/meson.build +0 -1
index 880a1b4a3..2d05d5af1 100644
@@ -3,4 +3,3 @@
 
 drivers = ['mlx5', 'octeontx2']
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
drivers/regex/mlx5/meson.build +0 -1
index d7cb2c572..87e961181 100644
@@ -7,7 +7,6 @@ if not is_linux
 	subdir_done()
 endif
 
-fmt_name = 'mlx5_regex'
 deps += ['common_mlx5', 'eal', 'regexdev']
 sources = files(
 	'mlx5_regex.c',
drivers/regex/octeontx2/meson.build +0 -1
index 34e51728c..6ccc8589a 100644
@@ -22,7 +22,6 @@ sources = files('otx2_regexdev.c',
 		'otx2_regexdev_compiler.c'
 		)
 
-fmt_name = 'octeontx2_regex'
 deps += ['bus_pci', 'common_octeontx2', 'regexdev']
 
 includes += include_directories('../../common/octeontx2')
drivers/vdpa/meson.build +0 -1
index b346e4308..4929be4c0 100644
@@ -9,4 +9,3 @@ drivers = ['ifc',
 	   'mlx5',]
 std_deps = ['bus_pci', 'kvargs']
 std_deps += ['vhost']
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
drivers/vdpa/mlx5/meson.build +0 -1
index 254a8ec14..a83ca86b3 100644
@@ -7,7 +7,6 @@ if not is_linux
 	subdir_done()
 endif
 
-fmt_name = 'mlx5_vdpa'
 deps += ['hash', 'common_mlx5', 'vhost', 'pci', 'eal', 'sched']
 sources = files(
 	'mlx5_vdpa.c',
lib/meson.build +1 -2
index ed00f8914..8b6599038 100644
@@ -100,8 +100,7 @@ foreach l:libraries
 		set_variable(name.underscorify() + '_disable_reason', reason)
 	else
 		enabled_libs += name
-		dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro
-		dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro
+		dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1)
 		install_headers(headers)
 
 		libname = 'rte_' + name
Signature · 1 line
2.27.0
#1 lore raw

09/12/2020 18:14, Bruce Richardson:

Quoted 5 lines

As announced in the deprecation note, remove all compatibility build defines from previous make/meson versions and use only the standardized ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.

Applied with a note in the API release notes:

* config: Removed the old macros, included in ``rte_config.h``, to indicate which DPDK libraries and drivers are built.
The new macros are generated by meson in a standardized format:
``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the upper-case component name, e.g. ``EAL``, ``ETHDEV``, ``VIRTIO``, and ``CLASS`` is the upper-case driver class, e.g. ``NET``, ``CRYPTO``.

#2 lore raw
Quoted 7 lines · Thomas Monjalon

09/12/2020 18:14, Bruce Richardson:

Quoted 5 lines

As announced in the deprecation note, remove all compatibility build defines from previous make/meson versions and use only the standardized ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.

Quoted 9 lines

Applied with a note in the API release notes:

* config: Removed the old macros, included in ``rte_config.h``, to indicate which DPDK libraries and drivers are built.
The new macros are generated by meson in a standardized format:
``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the upper-case component name, e.g. ``EAL``, ``ETHDEV``, ``VIRTIO``, and ``CLASS`` is the upper-case driver class, e.g. ``NET``, ``CRYPTO``.

Thanks, Thomas.