Skip to contentSkip to conversation

Set new board

U-Boot-Users MARCO LUFFARELLI 2 participants 2 messages Mar 15, 2006

lore
Share & tools
lore
#0 lore raw

I have make a new board with samsung s3c2410a processor, ethernet controllor cs8900a-cq3, 2 banks of samsung ram k4s283233f-hn75 and 1 bank of flash memory k9f2808uoc-ycbo samsung. total size of ram is 256MB organized in two bank (128MBx2). Total flash is 128MB. I need a help to configure the u-boot. How and what i can cange in the original file of u-boot version 1.1.2 to setting flash memory and 2 banks of ram?

tahnks .
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060315/52f92071/attachment.htm

#1 lore raw

MARCO LUFFARELLI ha scritto:

Quoted 9 lines

I have make a new board with samsung s3c2410a processor, ethernet controllor cs8900a-cq3, 2 banks of samsung ram k4s283233f-hn75 and 1 bank of flash memory k9f2808uoc-ycbo samsung. total size of ram is 256MB organized in two bank (128MBx2). Total flash is 128MB. I need a help to configure the u-boot. How and what i can cange in the original file of u-boot version 1.1.2 to setting flash memory and 2 banks of ram?

tahnks .

Flash and memory informations and related drivers are usually located into trhe proper board directory.
BTW I suggest you to patch against the latest 1.1.4 version in order to avoid to waste your effort with an old version.

Ciao

Signature · 4 lines
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
www.koansoftware.com    |    www.klinux.org