Skip to contentSkip to conversation

V4L/DVB fixes

PATCH In review [email protected] 5 participants 30 messages Mar 17, 2006 – Mar 18, 2006 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

cover V4L/DVB fixes

This patch series is also available under v4l-dvb.git tree at:
kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git

Linus, please pull these from master branch.

It contains the following stuff:

- Nskips maybe used uninitialized in bttv_risc_overlay
- Fix cx88 error messages on balance change
- Correct gpio values for Aver 303 Studio in v4l-dvb tree
- Fix typo in enum name and use enum in struct dmxdev_filter
- Added no_overlay option and quirks to saa7134
- Cx88-cards.c: fix values of gpio0 for card CX88_BOARD_PROLINK_PLAYTVPVR
- Cx88-input.c: add IR remote control support to CX88_BOARD_PROLINK_PLAYTVPVR
- Cx88 default picture controls values
- Cleanup mangled whitespace
- BUG_ON() Conversion in drivers/video/media
- Snd_cx88_create: don't dereference NULL core
- Kconfig: select VIDEO_CX25840 to build cx25840 a/v decoder module
- Whitespace: fix incorrect indentation of curly bracket
- Cinergy T2 dmx cleanup on disconnect
- Restore tuning capabilities in v4l2 mxb driver
- Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVB
- Kconfig: fix ATSC frontend menu item names by manufacturer
- Fix a bug when more than MAXBOARDS were plugged on em28xx
- Cpia2: move Kconfig build logic into cpia2/Kconfig
- VIDEO_CPIA2 must depend on USB
- Fixed em28xx based system lockup

Cheers,
Mauro.

V4L/DVB development is hosted at http://linuxtv.org
Development Mercurial trees are available at http://linuxtv.org/hg
---

 drivers/media/common/saa7146_core.c               |    3 -
 drivers/media/common/saa7146_fops.c               |    6 +--
 drivers/media/dvb/cinergyT2/cinergyT2.c           |    4 ++
 drivers/media/dvb/dvb-core/dmxdev.h               |    4 +-
 drivers/media/dvb/frontends/Kconfig               |    6 +--
 drivers/media/dvb/ttpci/av7110.c                  |    6 +--
 drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c |    3 -
 drivers/media/video/Kconfig                       |    5 ++
 drivers/media/video/Makefile                      |    3 +
 drivers/media/video/bttv-cards.c                  |   10 +++--
 drivers/media/video/bttv-risc.c                   |    5 +-
 drivers/media/video/cpia2/Kconfig                 |   11 +++++
 drivers/media/video/cx25840/Kconfig               |    9 ++++
 drivers/media/video/cx25840/Makefile              |    2 -
 drivers/media/video/cx88/Kconfig                  |   28 +++++++-------
 drivers/media/video/cx88/cx88-alsa.c              |   10 ++---
 drivers/media/video/cx88/cx88-cards.c             |   23 ++++++-----
 drivers/media/video/cx88/cx88-core.c              |    3 -
 drivers/media/video/cx88/cx88-input.c             |    1 
 drivers/media/video/cx88/cx88-video.c             |   17 ++++----
 drivers/media/video/cx88/cx88.h                   |    2 -
 drivers/media/video/em28xx/em28xx-video.c         |    5 ++
 drivers/media/video/mxb.c                         |    4 ++
 drivers/media/video/saa7134/saa7134-alsa.c        |    3 -
 drivers/media/video/saa7134/saa7134-cards.c       |    2 -
 drivers/media/video/saa7134/saa7134-core.c        |   24 +++++++++++-
 drivers/media/video/saa7134/saa7134-oss.c         |    6 +--
 drivers/media/video/saa7134/saa7134-video.c       |    3 -
 drivers/media/video/video-buf.c                   |    3 -
 29 files changed, 130 insertions(+), 81 deletions(-)
#1 lore raw

PATCH 1/21 Nskips maybe used uninitialized in bttv_risc_overlay

From: Duncan Sands <[email protected]>
Date: 1141914014 \-0300

The Coverity checker (previously Stanford checker) noticed that the value of nskips could be read even if it was never written.

---

 drivers/media/video/bttv-risc.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/media/video/bttv-risc.c +2 -0
index b40e973..af66a8d 100644
@@ -274,6 +274,8 @@ bttv_risc_overlay(struct bttv *btv, stru
 		if (line > maxy)
 			btcx_calc_skips(line, ov->w.width, &maxy,
 					skips, &nskips, ov->clips, ov->nclips);
+		else
+			nskips = 0;
 
 		/* write out risc code */
 		for (start = 0, skip = 0; start < ov->w.width; start = end) {
#2 lore raw

PATCH 2/21 Fix cx88 error messages on balance change

In reply to [email protected]

From: Ian Pickworth <[email protected]>
Date: 1141916620 \-0300

There is an error in the cx88 code that causes this message in the syslog when balance is changed at full volume:

Mar  4 18:35:08 ian2 kernel: cx88[0]: irq pci [0x1] vid*
Mar  4 18:35:39 ian2 last message repeated 348 times
Mar  4 18:36:01 ian2 last message repeated 564 times

... and so on
The attached patch cures this problem.

---

 drivers/media/video/cx88/cx88.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/cx88/cx88.h +1 -1
index e9fd55b..613d227 100644
@@ -62,7 +62,7 @@
 /* need "shadow" registers for some write-only ones ... */
 #define SHADOW_AUD_VOL_CTL           1
 #define SHADOW_AUD_BAL_CTL           2
-#define SHADOW_MAX                   2
+#define SHADOW_MAX                   3
 
 /* FM Radio deemphasis type */
 enum cx88_deemph_type {
#3 lore raw

PATCH 3/21 Correct gpio values for Aver 303 Studio in v4l-dvb tree

In reply to [email protected]

From: Marcin Rudowski <[email protected]>
Date: 1141931391 \-0300

Old values generally works in A2 mono, but new ones allows:
- detect and use Nicam stereo
- mute in tv
- use radio FM

---

 drivers/media/video/cx88/cx88-cards.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)
drivers/media/video/cx88/cx88-cards.c +4 -3
index 1bc9992..9e29df3 100644
@@ -184,17 +184,18 @@ struct cx88_board cx88_boards[] = {
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
-			.gpio1  = 0x309f,
+			.gpio1  = 0xe09f,
 		},{
 			.type   = CX88_VMUX_COMPOSITE1,
 			.vmux   = 1,
-			.gpio1  = 0x305f,
+			.gpio1  = 0xe05f,
 		},{
 			.type   = CX88_VMUX_SVIDEO,
 			.vmux   = 2,
-			.gpio1  = 0x305f,
+			.gpio1  = 0xe05f,
 		}},
 		.radio = {
+			.gpio1  = 0xe0df,
 			.type   = CX88_RADIO,
 		},
 	},
#4 lore raw

PATCH 4/21 Fix typo in enum name and use enum in struct dmxdev_filter

In reply to [email protected]

From: Andreas Oberritter <[email protected]>
Date: 1142014918 \-0300

Rename 'enum dmxdevype' to 'enum dmxdev_type' and use this enum instead of int for the member 'type' of struct dmxdev_filter.

---

 drivers/media/dvb/dvb-core/dmxdev.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/media/dvb/dvb-core/dmxdev.h +2 -2
index fd72920..6b63577 100644
@@ -37,7 +37,7 @@
 #include "dvbdev.h"
 #include "demux.h"
 
-enum dmxdevype {
+enum dmxdev_type {
 	DMXDEV_TYPE_NONE,
 	DMXDEV_TYPE_SEC,
 	DMXDEV_TYPE_PES,
@@ -78,7 +78,7 @@ struct dmxdev_filter {
 		struct dmx_pes_filter_params pes;
 	} params;
 
-	int type;
+	enum dmxdev_type type;
 	enum dmxdev_state state;
 	struct dmxdev *dev;
 	struct dmxdev_buffer buffer;
#5 lore raw

PATCH 5/21 Added no_overlay option and quirks to saa7134

In reply to [email protected]

From: Mauro Carvalho Chehab <[email protected]>
Date: 1142020010 \-0300

Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers.

---

 drivers/media/video/bttv-cards.c           |   10 +++++++---
 drivers/media/video/saa7134/saa7134-core.c |   21 +++++++++++++++++++++
 2 files changed, 28 insertions(+), 3 deletions(-)
drivers/media/video/bttv-cards.c +7 -3
index 9749d6e..ffbc848 100644
@@ -137,6 +137,8 @@ MODULE_PARM_DESC(card,"specify TV/grabbe
 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
+		" [some VIA/SIS chipsets are known to have problem with overlay]");
 
 /* ----------------------------------------------------------------------- */
 /* list of card IDs for bt878+ cards                                       */
@@ -4944,12 +4946,14 @@ void __devinit bttv_check_chipset(void)
 	if (vsfx)
 		printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
 	if (pcipci_fail) {
-		printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
+		printk(KERN_INFO "bttv: bttv and your chipset may not work "
+							"together.\n");
 		if (!no_overlay) {
-			printk(KERN_WARNING "bttv: overlay will be disabled.\n");
+			printk(KERN_INFO "bttv: overlay will be disabled.\n");
 			no_overlay = 1;
 		} else {
-			printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
+			printk(KERN_INFO "bttv: overlay forced. Use this "
+						"option at your own risk.\n");
 		}
 	}
 	if (UNSET != latency)
drivers/media/video/saa7134/saa7134-core.c +21 -0
index 028904b..996b5ee 100644
@@ -66,6 +66,11 @@ static unsigned int latency = UNSET;
 module_param(latency, int, 0444);
 MODULE_PARM_DESC(latency,"pci latency timer");
 
+static int no_overlay=-1;
+module_param(no_overlay, int, 0444);
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
+		" [some VIA/SIS chipsets are known to have problem with overlay]");
+
 static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
 static unsigned int vbi_nr[]   = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
 static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
@@ -835,6 +840,22 @@ static int __devinit saa7134_initdev(str
 			latency = 0x0A;
 		}
 #endif
+		if (pci_pci_problems & PCIPCI_FAIL) {
+			printk(KERN_INFO "%s: quirk: this driver and your "
+					"chipset may not work together"
+					" in overlay mode.\n",dev->name);
+			if (!no_overlay) {
+				printk(KERN_INFO "%s: quirk: overlay "
+						"mode will be disabled.\n",
+						dev->name);
+				no_overlay = 1;
+			} else {
+				printk(KERN_INFO "%s: quirk: overlay "
+						"mode will be forced. Use this"
+						" option at your own risk.\n",
+						dev->name);
+			}
+		}
 	}
 	if (UNSET != latency) {
 		printk(KERN_INFO "%s: setting pci latency timer to %d\n",
#6 lore raw

Re: [PATCH 05/21] Added no_overlay option and quirks to saa7134

Quoted 4 lines · On Fri, Mar 17, 2006 at 05:54:34PM -0300, [email protected] wrote:

From: Mauro Carvalho Chehab <[email protected]>
Date: 1142020010 \-0300

Quoted 10 lines

Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers.
...

As far as I can see, the the no_overlay option in the saa7134 driver doesn't change anything (except for a printk).

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#7 lore raw

Re: [v4l-dvb-maintainer] Re: [PATCH 05/21] Added no_overlay option and quirks to saa7134

Adrian,

Argh! I just forgot to add the important part of the patch! I'm enclosing it. Please, test. I'll add to both devel and master branch of v4l-dvb.git tree.

Cheers,
Mauro.

Em Sáb, 2006-03-18 às 00:24 +0100, Adrian Bunk escreveu:

Quoted 16 lines · On Fri, Mar 17, 2006 at 05:54:34PM -0300, [email protected] wrote:
Quoted 4 lines

From: Mauro Carvalho Chehab <[email protected]>
Date: 1142020010 \-0300

Quoted 10 lines

Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers.
...

Quoted 6 lines

As far as I can see, the the no_overlay option in the saa7134 driver doesn't change anything (except for a printk).

cu
Adrian

Cheers,
Mauro.

diff-tree fc33159b01f433f26a72c871ce76d85a45ec9c16 (from 59002b58a7773888479ad6704a96c2a645b83dc6)

Author: Mauro Carvalho Chehab <[email protected]>
Date:   Fri Mar 17 20:54:32 2006 -0300

V4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driver

Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers.

drivers/media/video/saa7134/saa7134-core.c +9 -4
index 3203a80..15405d1 100644
@@ -66,8 +66,8 @@ static unsigned int latency = UNSET;
 module_param(latency, int, 0444);
 MODULE_PARM_DESC(latency,"pci latency timer");
 
-static int no_overlay=-1;
-module_param(no_overlay, int, 0444);
+int saa7134_no_overlay=-1;
+module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 		" [some VIA/SIS chipsets are known to have problem with overlay]");
 
@@ -843,11 +843,11 @@ static int __devinit saa7134_initdev(str
 			printk(KERN_INFO "%s: quirk: this driver and your "
 					"chipset may not work together"
 					" in overlay mode.\n",dev->name);
-			if (!no_overlay) {
+			if (!saa7134_no_overlay) {
 				printk(KERN_INFO "%s: quirk: overlay "
 						"mode will be disabled.\n",
 						dev->name);
-				no_overlay = 1;
+				saa7134_no_overlay = 1;
 			} else {
 				printk(KERN_INFO "%s: quirk: overlay "
 						"mode will be forced. Use this"
@@ -957,6 +957,11 @@ static int __devinit saa7134_initdev(str
 	v4l2_prio_init(&dev->prio);
 
 	/* register v4l devices */
+	if (saa7134_no_overlay <= 0) {
+		saa7134_video_template.type |= VID_TYPE_OVERLAY;
+	} else {
+		printk("bttv: Overlay support disabled.\n");
+	}
 	dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
 	err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
 				    video_nr[dev->nr]);
drivers/media/video/saa7134/saa7134-video.c +25 -2
index 2da382d..aeef80f 100644
@@ -1461,6 +1461,10 @@ static int saa7134_g_fmt(struct saa7134_
 			f->fmt.pix.height * f->fmt.pix.bytesperline;
 		return 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		if (saa7134_no_overlay > 0) {
+			printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+			return -EINVAL;
+		}
 		f->fmt.win = fh->win;
 		return 0;
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
@@ -1525,6 +1529,10 @@ static int saa7134_try_fmt(struct saa713
 		return 0;
 	}
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		if (saa7134_no_overlay > 0) {
+			printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+			return -EINVAL;
+		}
 		err = verify_preview(dev,&f->fmt.win);
 		if (0 != err)
 			return err;
@@ -1555,6 +1563,10 @@ static int saa7134_s_fmt(struct saa7134_
 		fh->cap.field = f->fmt.pix.field;
 		return 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		if (saa7134_no_overlay > 0) {
+			printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+			return -EINVAL;
+		}
 		err = verify_preview(dev,&f->fmt.win);
 		if (0 != err)
 			return err;
@@ -1714,11 +1726,13 @@ static int video_do_ioctl(struct inode *
 		cap->version = SAA7134_VERSION_CODE;
 		cap->capabilities =
 			V4L2_CAP_VIDEO_CAPTURE |
-			V4L2_CAP_VIDEO_OVERLAY |
 			V4L2_CAP_VBI_CAPTURE |
 			V4L2_CAP_READWRITE |
 			V4L2_CAP_STREAMING |
 			V4L2_CAP_TUNER;
+		if (saa7134_no_overlay <= 0) {
+			cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY;
+		}
 
 		if ((tuner_type == TUNER_ABSENT) || (tuner_type == UNSET))
 			cap->capabilities &= ~V4L2_CAP_TUNER;
@@ -1969,6 +1983,10 @@ static int video_do_ioctl(struct inode *
 		switch (type) {
 		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			if (saa7134_no_overlay > 0) {
+				printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+				return -EINVAL;
+			}
 			if (index >= FORMATS)
 				return -EINVAL;
 			if (f->type == V4L2_BUF_TYPE_VIDEO_OVERLAY &&
@@ -2029,6 +2047,11 @@ static int video_do_ioctl(struct inode *
 		int *on = arg;
 
 		if (*on) {
+			if (saa7134_no_overlay > 0) {
+				printk ("no_overlay\n");
+				return -EINVAL;
+			}
+
 			if (!res_get(dev,fh,RESOURCE_OVERLAY))
 				return -EBUSY;
 			spin_lock_irqsave(&dev->slock,flags);
@@ -2280,7 +2303,7 @@ static struct file_operations radio_fops
 struct video_device saa7134_video_template =
 {
 	.name          = "saa7134-video",
-	.type          = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY|
+	.type          = VID_TYPE_CAPTURE|VID_TYPE_TUNER|
 			 VID_TYPE_CLIPPING|VID_TYPE_SCALES,
 	.hardware      = 0,
 	.fops          = &video_fops,
drivers/media/video/saa7134/saa7134.h +1 -0
index c159428..28e6f0a 100644
@@ -557,6 +557,7 @@ struct saa7134_dev {
 /* saa7134-core.c                                              */
 
 extern struct list_head  saa7134_devlist;
+extern int saa7134_no_overlay;
 
 void saa7134_track_gpio(struct saa7134_dev *dev, char *msg);
 
#8 lore raw

PATCH 6/21 Cx88-cards.c: fix values of gpio0 for card CX88_BOARD_PROLINK_PLAYTVPVR

In reply to [email protected]

From: Matheus Izvekov <[email protected]>
Date: 1142132064 \-0300

This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR to the ones observed using RegSpy from the dscaler project.

---

 drivers/media/video/cx88/cx88-cards.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/media/video/cx88/cx88-cards.c +4 -4
index 9e29df3..7471a7d 100644
@@ -323,19 +323,19 @@ struct cx88_board cx88_boards[] = {
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
-			.gpio0  = 0xff00,
+                       .gpio0  = 0xbff0,
 		},{
 			.type   = CX88_VMUX_COMPOSITE1,
 			.vmux   = 1,
-			.gpio0  = 0xff03,
+                       .gpio0  = 0xbff3,
 		},{
 			.type   = CX88_VMUX_SVIDEO,
 			.vmux   = 2,
-			.gpio0  = 0xff03,
+                       .gpio0  = 0xbff3,
 		}},
 		.radio = {
 			.type   = CX88_RADIO,
-			.gpio0  = 0xff00,
+                       .gpio0  = 0xbff0,
 		},
 	},
 	[CX88_BOARD_ASUS_PVR_416] = {
#9 lore raw

PATCH 7/21 Cx88-input.c: add IR remote control support to CX88_BOARD_PROLINK_PLAYTVPVR

In reply to [email protected]

From: Matheus Izvekov <[email protected]>
Date: 1142132098 \-0300

This patch adds support for the IR remote control found in the card CX88_BOARD_PROLINK_PLAYTVPVR.

---

 drivers/media/video/cx88/cx88-input.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/media/video/cx88/cx88-input.c +1 -0
index 165d948..0b7c812 100644
@@ -517,6 +517,7 @@ int cx88_ir_init(struct cx88_core *core,
 		ir->mask_keydown = 0x02;
 		ir->polling = 5; /* ms */
 		break;
+       case CX88_BOARD_PROLINK_PLAYTVPVR:
 	case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO:
 		ir_codes = ir_codes_pixelview;
 		ir->gpio_addr = MO_GP1_IO;
#10 lore raw

PATCH 8/21 Cx88 default picture controls values

In reply to [email protected]

From: Marcin Rudowski <[email protected]>
Date: 1142132627 \-0300

This patch fixes default values for some picture controls:
- brightness set to 50% by default (now is 0%)
- hue set to 50% by default (now is 0%)
- sets saturation to datasheet value
- volume set to 0dB (now is -32dB)
and some left small fixes:
- twice offset adding
- balance didn't follow datasheet (bits[0:5] = attenuation; bit[6] = channel to provide attenuation)

---

 drivers/media/video/cx88/cx88-video.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)
drivers/media/video/cx88/cx88-video.c +7 -7
index 073494c..39328bb 100644
@@ -227,7 +227,7 @@ static struct cx88_ctrl cx8800_ctls[] = 
 			.minimum       = 0x00,
 			.maximum       = 0xff,
 			.step          = 1,
-			.default_value = 0,
+			.default_value = 0x7f,
 			.type          = V4L2_CTRL_TYPE_INTEGER,
 		},
 		.off                   = 128,
@@ -255,7 +255,7 @@ static struct cx88_ctrl cx8800_ctls[] = 
 			.minimum       = 0,
 			.maximum       = 0xff,
 			.step          = 1,
-			.default_value = 0,
+			.default_value = 0x7f,
 			.type          = V4L2_CTRL_TYPE_INTEGER,
 		},
 		.off                   = 128,
@@ -300,7 +300,7 @@ static struct cx88_ctrl cx8800_ctls[] = 
 			.minimum       = 0,
 			.maximum       = 0x3f,
 			.step          = 1,
-			.default_value = 0x1f,
+			.default_value = 0x3f,
 			.type          = V4L2_CTRL_TYPE_INTEGER,
 		},
 		.reg                   = AUD_VOL_CTL,
@@ -909,7 +909,8 @@ static int get_control(struct cx88_core 
 	value = c->sreg ? cx_sread(c->sreg) : cx_read(c->reg);
 	switch (ctl->id) {
 	case V4L2_CID_AUDIO_BALANCE:
-		ctl->value = (value & 0x40) ? (value & 0x3f) : (0x40 - (value & 0x3f));
+		ctl->value = ((value & 0x7f) < 0x40) ? ((value & 0x7f) + 0x40)
+					: (0x7f - (value & 0x7f));
 		break;
 	case V4L2_CID_AUDIO_VOLUME:
 		ctl->value = 0x3f - (value & 0x3f);
@@ -946,7 +947,7 @@ static int set_control(struct cx88_core 
 	mask=c->mask;
 	switch (ctl->id) {
 	case V4L2_CID_AUDIO_BALANCE:
-		value = (ctl->value < 0x40) ? (0x40 - ctl->value) : ctl->value;
+		value = (ctl->value < 0x40) ? (0x7f - ctl->value) : (ctl->value - 0x40);
 		break;
 	case V4L2_CID_AUDIO_VOLUME:
 		value = 0x3f - (ctl->value & 0x3f);
@@ -987,8 +988,7 @@ static void init_controls(struct cx88_co
 
 	for (i = 0; i < CX8800_CTLS; i++) {
 		ctrl.id=cx8800_ctls[i].v.id;
-		ctrl.value=cx8800_ctls[i].v.default_value
-				+cx8800_ctls[i].off;
+		ctrl.value=cx8800_ctls[i].v.default_value;
 		set_control(core, &ctrl);
 	}
 }
#11 lore raw

Re: [PATCH 08/21] Cx88 default picture controls values

Quoted 1 line · On Fri, 2006-03-17 at 17:54 -0300, [email protected] wrote:

- volume set to 0dB (now is -32dB)

Shouldn't volumes default to muted so as not to damage people's speakers and/or hearing?

Lee

#12 lore raw

Re: [PATCH 08/21] Cx88 default picture controls values

Em Sex, 2006-03-17 às 16:10 -0500, Lee Revell escreveu:

Quoted 5 lines · On Fri, 2006-03-17 at 17:54 -0300, [email protected] wrote:
Quoted 1 line

- volume set to 0dB (now is -32dB)

Shouldn't volumes default to muted so as not to damage people's speakers and/or hearing?

Good point. Generally, video devices starts with an open volume when the user opens the video application. After closed, it turns off audio. In fact, for most applications, this is really not important, since default is also stored at the application itself. If we compare with a TV set, when people turn TV on, they expect to listen something.

About cx88, in the past, we were starting with a low volume, but people complained that this is bad, since they don't know for sure if the audio is working fine.

If we decide to change to start without volume, we will need to patch all other devices, since current V4L default is to start at maximum volume (except for msp3400, that starts at about 90% of max scale, due troubles with maximum volume on some boards).

Quoted 3 lines

Lee

Cheers,
Mauro.

#13 lore raw

PATCH 9/21 Cleanup mangled whitespace

In reply to [email protected]

From: Michael Krufky <[email protected]>
Date: 1142232104 \-0300

---

 drivers/media/video/cx88/cx88-cards.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/media/video/cx88/cx88-cards.c +4 -4
index 7471a7d..0e518e8 100644
@@ -323,19 +323,19 @@ struct cx88_board cx88_boards[] = {
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
-                       .gpio0  = 0xbff0,
+			.gpio0  = 0xbff0,
 		},{
 			.type   = CX88_VMUX_COMPOSITE1,
 			.vmux   = 1,
-                       .gpio0  = 0xbff3,
+			.gpio0  = 0xbff3,
 		},{
 			.type   = CX88_VMUX_SVIDEO,
 			.vmux   = 2,
-                       .gpio0  = 0xbff3,
+			.gpio0  = 0xbff3,
 		}},
 		.radio = {
 			.type   = CX88_RADIO,
-                       .gpio0  = 0xbff0,
+			.gpio0  = 0xbff0,
 		},
 	},
 	[CX88_BOARD_ASUS_PVR_416] = {
#14 lore raw

PATCH 10/21 BUG_ON() Conversion in drivers/video/media

In reply to [email protected]

From: Eric Sesterhenn <[email protected]>
Date: 1142266631 \-0300

---

 drivers/media/common/saa7146_core.c               |    3 +--
 drivers/media/common/saa7146_fops.c               |    6 ++----
 drivers/media/dvb/ttpci/av7110.c                  |    6 ++----
 drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c |    3 +--
 drivers/media/video/bttv-risc.c                   |    3 +--
 drivers/media/video/cx88/cx88-core.c              |    3 +--
 drivers/media/video/cx88/cx88-video.c             |    3 +--
 drivers/media/video/saa7134/saa7134-alsa.c        |    3 +--
 drivers/media/video/saa7134/saa7134-core.c        |    3 +--
 drivers/media/video/saa7134/saa7134-oss.c         |    6 ++----
 drivers/media/video/saa7134/saa7134-video.c       |    3 +--
 drivers/media/video/video-buf.c                   |    3 +--
 12 files changed, 15 insertions(+), 30 deletions(-)
drivers/media/common/saa7146_core.c +1 -2
index 04c1938..98c4322 100644
@@ -116,8 +116,7 @@ static struct scatterlist* vmalloc_to_sg
 		pg = vmalloc_to_page(virt);
 		if (NULL == pg)
 			goto err;
-		if (PageHighMem(pg))
-			BUG();
+		BUG_ON(PageHighMem(pg));
 		sglist[i].page   = pg;
 		sglist[i].length = PAGE_SIZE;
 	}
drivers/media/common/saa7146_fops.c +2 -4
index f8cf73e..c53fd69 100644
@@ -37,8 +37,7 @@ void saa7146_res_free(struct saa7146_fh 
 	struct saa7146_dev *dev = fh->dev;
 	struct saa7146_vv *vv = dev->vv_data;
 
-	if ((fh->resources & bits) != bits)
-		BUG();
+	BUG_ON((fh->resources & bits) != bits);
 
 	down(&dev->lock);
 	fh->resources  &= ~bits;
@@ -55,8 +54,7 @@ void saa7146_dma_free(struct saa7146_dev
 {
 	DEB_EE(("dev:%p, buf:%p\n",dev,buf));
 
-	if (in_interrupt())
-		BUG();
+	BUG_ON(in_interrupt());
 
 	videobuf_waiton(&buf->vb,0,0);
 	videobuf_dma_pci_unmap(dev->pci, &buf->vb.dma);
drivers/media/dvb/ttpci/av7110.c +2 -4
index 7c6ccb9..d5ef440 100644
@@ -1088,11 +1088,9 @@ static int dvb_get_stc(struct dmx_demux 
 	struct av7110 *av7110;
 
 	/* pointer casting paranoia... */
-	if (!demux)
-		BUG();
+	BUG_ON(!demux);
 	dvbdemux = (struct dvb_demux *) demux->priv;
-	if (!dvbdemux)
-		BUG();
+	BUG_ON(!dvbdemux);
 	av7110 = (struct av7110 *) dvbdemux->priv;
 
 	dprintk(4, "%p\n", av7110);
drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +1 -2
index 5a13c47..182b68b 100644
@@ -689,8 +689,7 @@ static void ttusb_process_frame(struct t
 				memcpy(ttusb->muxpack + ttusb->muxpack_ptr,
 				       data, avail);
 				ttusb->muxpack_ptr += avail;
-				if (ttusb->muxpack_ptr > 264)
-					BUG();
+				BUG_ON(ttusb->muxpack_ptr > 264);
 				data += avail;
 				len -= avail;
 				/* determine length */
drivers/media/video/bttv-risc.c +1 -2
index af66a8d..952f1be 100644
@@ -509,8 +509,7 @@ bttv_risc_hook(struct bttv *btv, int slo
 void
 bttv_dma_free(struct bttv *btv, struct bttv_buffer *buf)
 {
-	if (in_interrupt())
-		BUG();
+	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb,0,0);
 	videobuf_dma_pci_unmap(btv->c.pci, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
drivers/media/video/cx88/cx88-core.c +1 -2
index 3720f24..db3882b 100644
@@ -215,8 +215,7 @@ int cx88_risc_stopper(struct pci_dev *pc
 void
 cx88_free_buffer(struct pci_dev *pci, struct cx88_buffer *buf)
 {
-	if (in_interrupt())
-		BUG();
+	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb,0,0);
 	videobuf_dma_pci_unmap(pci, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
drivers/media/video/cx88/cx88-video.c +1 -2
index 39328bb..5f69980 100644
@@ -366,8 +366,7 @@ static
 void res_free(struct cx8800_dev *dev, struct cx8800_fh *fh, unsigned int bits)
 {
 	struct cx88_core *core = dev->core;
-	if ((fh->resources & bits) != bits)
-		BUG();
+	BUG_ON((fh->resources & bits) != bits);
 
 	down(&core->lock);
 	fh->resources  &= ~bits;
drivers/media/video/saa7134/saa7134-alsa.c +1 -2
index 7df5e08..900541f 100644
@@ -308,8 +308,7 @@ static int dsp_buffer_init(struct saa713
 
 static int dsp_buffer_free(struct saa7134_dev *dev)
 {
-	if (!dev->dmasound.blksize)
-		BUG();
+	BUG_ON(!dev->dmasound.blksize);
 
 	videobuf_dma_free(&dev->dmasound.dma);
 
drivers/media/video/saa7134/saa7134-core.c +1 -2
index 996b5ee..3880234 100644
@@ -256,8 +256,7 @@ void saa7134_pgtable_free(struct pci_dev
 
 void saa7134_dma_free(struct saa7134_dev *dev,struct saa7134_buf *buf)
 {
-	if (in_interrupt())
-		BUG();
+	BUG_ON(in_interrupt());
 
 	videobuf_waiton(&buf->vb,0,0);
 	videobuf_dma_pci_unmap(dev->pci, &buf->vb.dma);
drivers/media/video/saa7134/saa7134-oss.c +2 -4
index 7448e38..1667d51 100644
@@ -84,8 +84,7 @@ static int dsp_buffer_init(struct saa713
 {
 	int err;
 
-	if (!dev->dmasound.bufsize)
-		BUG();
+	BUG_ON(!dev->dmasound.bufsize);
 	videobuf_dma_init(&dev->dmasound.dma);
 	err = videobuf_dma_init_kernel(&dev->dmasound.dma, PCI_DMA_FROMDEVICE,
 				       (dev->dmasound.bufsize + PAGE_SIZE) >> PAGE_SHIFT);
@@ -96,8 +95,7 @@ static int dsp_buffer_init(struct saa713
 
 static int dsp_buffer_free(struct saa7134_dev *dev)
 {
-	if (!dev->dmasound.blksize)
-		BUG();
+	BUG_ON(!dev->dmasound.blksize);
 	videobuf_dma_free(&dev->dmasound.dma);
 	dev->dmasound.blocks  = 0;
 	dev->dmasound.blksize = 0;
drivers/media/video/saa7134/saa7134-video.c +1 -2
index e97426b..e0480ea 100644
@@ -489,8 +489,7 @@ int res_locked(struct saa7134_dev *dev, 
 static
 void res_free(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bits)
 {
-	if ((fh->resources & bits) != bits)
-		BUG();
+	BUG_ON((fh->resources & bits) != bits);
 
 	down(&dev->lock);
 	fh->resources  &= ~bits;
drivers/media/video/video-buf.c +1 -2
index 9ef4775..ced1419 100644
@@ -59,8 +59,7 @@ videobuf_vmalloc_to_sg(unsigned char *vi
 		pg = vmalloc_to_page(virt);
 		if (NULL == pg)
 			goto err;
-		if (PageHighMem(pg))
-			BUG();
+		BUG_ON(PageHighMem(pg));
 		sglist[i].page   = pg;
 		sglist[i].length = PAGE_SIZE;
 	}
#15 lore raw

PATCH 11/21 Snd_cx88_create: don't dereference NULL core

In reply to [email protected]

From: Duncan Sands <[email protected]>
Date: 1142349159 \-0300

If the call to cx88_core_get returns a NULL value, it is dereferenced by cx88_reset, and perhaps by cx88_core_put. Spotted by the Coverity checker.

---

 drivers/media/video/cx88/cx88-alsa.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)
drivers/media/video/cx88/cx88-alsa.c +5 -5
index 2acccd6..bffef1d 100644
@@ -672,6 +672,11 @@ static int __devinit snd_cx88_create(snd
 	chip = (snd_cx88_card_t *) card->private_data;
 
 	core = cx88_core_get(pci);
+	if (NULL == core) {
+		err = -EINVAL;
+		kfree (chip);
+		return err;
+	}
 
 	if (!pci_dma_supported(pci,0xffffffff)) {
 		dprintk(0, "%s/1: Oops: no 32bit PCI DMA ???\n",core->name);
@@ -688,11 +693,6 @@ static int __devinit snd_cx88_create(snd
 	spin_lock_init(&chip->reg_lock);
 
 	cx88_reset(core);
-	if (NULL == core) {
-		err = -EINVAL;
-		kfree (chip);
-		return err;
-	}
 	chip->core = core;
 
 	/* get irq */
#16 lore raw

PATCH 12/21 Kconfig: select VIDEO_CX25840 to build cx25840 a/v decoder module

In reply to [email protected]

From: Michael Krufky <[email protected]>
Date: 1142307307 \-0300

The cx25840 module requires external firmware in order to function, so it must select FW_LOADER, but saa7115 and saa7129 do not require it. This patch creates VIDEO_CX25840, and alters VIDEO_DECODER to select it.

---

 drivers/media/video/Kconfig          |    3 +++
 drivers/media/video/Makefile         |    3 ++-
 drivers/media/video/cx25840/Kconfig  |    9 +++++++++
 drivers/media/video/cx25840/Makefile |    2 +-
 4 files changed, 15 insertions(+), 2 deletions(-)
drivers/media/video/Kconfig +3 -0
index d82c8a3..995f033 100644
@@ -349,8 +349,11 @@ config VIDEO_AUDIO_DECODER
 config VIDEO_DECODER
 	tristate "Add support for additional video chipsets"
 	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	select VIDEO_CX25840
 	---help---
 	  Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
 	  video decoders.
 
+source "drivers/media/video/cx25840/Kconfig"
+
 endmenu
drivers/media/video/Makefile +2 -1
index faf7283..d36b145 100644
@@ -61,6 +61,7 @@ obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom
 
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
-obj-$(CONFIG_VIDEO_DECODER)     += saa7115.o cx25840/ saa7127.o
+obj-$(CONFIG_VIDEO_DECODER)     += saa7115.o saa7127.o
+obj-$(CONFIG_VIDEO_CX25840) += cx25840/
 
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
drivers/media/video/cx25840/Kconfig new file +9 -0
new file mode 100644
index 0000000..854264e
@@ -0,0 +1,9 @@
+config VIDEO_CX25840
+	tristate "Conexant CX2584x audio/video decoders"
+	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	select FW_LOADER
+	---help---
+	  Support for the Conexant CX2584x audio/video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx25840
drivers/media/video/cx25840/Makefile +1 -1
index 543ebac..32a896c 100644
@@ -1,6 +1,6 @@
 cx25840-objs    := cx25840-core.o cx25840-audio.o cx25840-firmware.o \
 		   cx25840-vbi.o
 
-obj-$(CONFIG_VIDEO_DECODER) += cx25840.o
+obj-$(CONFIG_VIDEO_CX25840) += cx25840.o
 
 EXTRA_CFLAGS += -I$(src)/..
#17 lore raw

PATCH 13/21 Whitespace: fix incorrect indentation of curly bracket

In reply to [email protected]

From: Michael Krufky <[email protected]>
Date: 1142363929 \-0300

---

 drivers/media/video/saa7134/saa7134-cards.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/saa7134/saa7134-cards.c +1 -1
index 6bc63a4..5b5e378 100644
@@ -536,7 +536,7 @@ struct saa7134_board saa7134_boards[] = 
 		.radio = {
 			.name = name_radio,
 			.amux = LINE2,
-	},
+		},
 	},
 	[SAA7134_BOARD_MD7134] = {
 		.name           = "Medion 7134",
#18 lore raw

PATCH 14/21 Cinergy T2 dmx cleanup on disconnect

In reply to [email protected]

From: Markus Rechberger <[email protected]>
Date: 1142425891 \-0300

Detaching the device didn't clean up several device files in /dev/dvb, after applying that patch all dvb devices disappeared as expected.

---

 drivers/media/dvb/cinergyT2/cinergyT2.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
drivers/media/dvb/cinergyT2/cinergyT2.c +4 -0
index c4b4c5b..4ef54c7 100644
@@ -505,6 +505,9 @@ static int cinergyt2_open (struct inode 
 
 static void cinergyt2_unregister(struct cinergyt2 *cinergyt2)
 {
+	dvb_net_release(&cinergyt2->dvbnet);
+	dvb_dmxdev_release(&cinergyt2->dmxdev);
+	dvb_dmx_release(&cinergyt2->demux);
 	dvb_unregister_device(cinergyt2->fedev);
 	dvb_unregister_adapter(&cinergyt2->adapter);
 
@@ -937,6 +940,7 @@ static int cinergyt2_probe (struct usb_i
 	return 0;
 
 bailout:
+	dvb_net_release(&cinergyt2->dvbnet);
 	dvb_dmxdev_release(&cinergyt2->dmxdev);
 	dvb_dmx_release(&cinergyt2->demux);
 	dvb_unregister_adapter(&cinergyt2->adapter);
#19 lore raw

PATCH 15/21 Restore tuning capabilities in v4l2 mxb driver

In reply to [email protected]

From: Michael Hunold <[email protected]>
Date: 1142446742 \-0300

The behaviour of the all-in-one Video4Linux tuner driver apparently changed. It now wants to know the tv standard, otherwise it refuses to tune.
Restore tuning functionality in my driver for the "Multimedia eXtension Board". The all-in-one tuner driver apparently changed its behaviour.

---

 drivers/media/video/mxb.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
drivers/media/video/mxb.c +4 -0
index 8416cef..e2b36ce 100644
@@ -327,6 +327,7 @@ static int mxb_init_done(struct saa7146_
 	struct video_decoder_init init;
 	struct i2c_msg msg;
 	struct tuner_setup tun_setup;
+	v4l2_std_id std = V4L2_STD_PAL_BG;
 
 	int i = 0, err = 0;
 	struct	tea6415c_multiplex vm;	
@@ -361,6 +362,9 @@ static int mxb_init_done(struct saa7146_
 	mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY,
 					&mxb->cur_freq);
 
+	/* set a default video standard */
+	mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
+
 	/* mute audio on tea6420s */
 	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]);
 	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]);
#20 lore raw

PATCH 16/21 Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVB

In reply to [email protected]

From: Michael Krufky <[email protected]>
Date: 1142400973 \-0300

VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS When cx88-alsa was added to cx88/Kconfig, it was added in between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused undesireable effects to the appearance of the menu options in menuconfig.
This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134, and restore the correct menuconfig appearance.

---

 drivers/media/video/cx88/Kconfig |   28 ++++++++++++++--------------
 1 files changed, 14 insertions(+), 14 deletions(-)
drivers/media/video/cx88/Kconfig +14 -14
index e99dfbb..87d79df 100644
@@ -15,20 +15,6 @@ config VIDEO_CX88
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx8800
 
-config VIDEO_CX88_DVB
-	tristate "DVB/ATSC Support for cx2388x based TV cards"
-	depends on VIDEO_CX88 && DVB_CORE
-	select VIDEO_BUF_DVB
-	---help---
-	  This adds support for DVB/ATSC cards based on the
-	  Connexant 2388x chip.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx88-dvb.
-
-	  You must also select one or more DVB/ATSC demodulators.
-	  If you are unsure which you need, choose all of them.
-
 config VIDEO_CX88_ALSA
 	tristate "ALSA DMA audio support"
 	depends on VIDEO_CX88 && SND && EXPERIMENTAL
@@ -44,6 +30,20 @@ config VIDEO_CX88_ALSA
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx88-alsa.
 
+config VIDEO_CX88_DVB
+	tristate "DVB/ATSC Support for cx2388x based TV cards"
+	depends on VIDEO_CX88 && DVB_CORE
+	select VIDEO_BUF_DVB
+	---help---
+	  This adds support for DVB/ATSC cards based on the
+	  Connexant 2388x chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-dvb.
+
+	  You must also select one or more DVB/ATSC demodulators.
+	  If you are unsure which you need, choose all of them.
+
 config VIDEO_CX88_DVB_ALL_FRONTENDS
 	bool "Build all supported frontends for cx2388x based TV cards"
 	default y
#21 lore raw

Re: [PATCH 16/21] Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVB

Linus,

Please apply this one. When VIDEO_CX88_ALSA was added, it was put in the wrong place, and caused the VIDEO_CX88_DVB stuff to get split up, making the menu harder to understand. Swapping these two menu items fixes the problem.

Thank you,

Michael Krufky

Quoted 68 lines · [email protected] wrote:

From: Michael Krufky <[email protected]>
Date: 1142400973 \-0300

VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS When cx88-alsa was added to cx88/Kconfig, it was added in between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused undesireable effects to the appearance of the menu options in menuconfig.
This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134, and restore the correct menuconfig appearance.

---

 drivers/media/video/cx88/Kconfig |   28 ++++++++++++++--------------
 1 files changed, 14 insertions(+), 14 deletions(-)
drivers/media/video/cx88/Kconfig +14 -14
index e99dfbb..87d79df 100644
@@ -15,20 +15,6 @@ config VIDEO_CX88
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx8800
 
-config VIDEO_CX88_DVB
-	tristate "DVB/ATSC Support for cx2388x based TV cards"
-	depends on VIDEO_CX88 && DVB_CORE
-	select VIDEO_BUF_DVB
-	---help---
-	  This adds support for DVB/ATSC cards based on the
-	  Connexant 2388x chip.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx88-dvb.
-
-	  You must also select one or more DVB/ATSC demodulators.
-	  If you are unsure which you need, choose all of them.
-
 config VIDEO_CX88_ALSA
 	tristate "ALSA DMA audio support"
 	depends on VIDEO_CX88 && SND && EXPERIMENTAL
@@ -44,6 +30,20 @@ config VIDEO_CX88_ALSA
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx88-alsa.
 
+config VIDEO_CX88_DVB
+	tristate "DVB/ATSC Support for cx2388x based TV cards"
+	depends on VIDEO_CX88 && DVB_CORE
+	select VIDEO_BUF_DVB
+	---help---
+	  This adds support for DVB/ATSC cards based on the
+	  Connexant 2388x chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-dvb.
+
+	  You must also select one or more DVB/ATSC demodulators.
+	  If you are unsure which you need, choose all of them.
+
 config VIDEO_CX88_DVB_ALL_FRONTENDS
 	bool "Build all supported frontends for cx2388x based TV cards"
 	default y
#22 lore raw

PATCH 1/1 Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVB

In reply to [email protected]

Linus,

I'm sorry to email this twice. The prior email has the patch included as a quote, this one contains the patch inline.

Please apply this one. When VIDEO_CX88_ALSA was added, it was put in the wrong place, and caused the VIDEO_CX88_DVB stuff to get split up, making the menu harder to understand. Swapping these two menu items fixes the problem.

Thank you,

Michael Krufky

From: Michael Krufky <[email protected]>
Date: 1142400973 \-0300

VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS When cx88-alsa was added to cx88/Kconfig, it was added in between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused undesireable effects to the appearance of the menu options in menuconfig.
This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134, and restore the correct menuconfig appearance.

---

 drivers/media/video/cx88/Kconfig |   28 ++++++++++++++--------------
 1 files changed, 14 insertions(+), 14 deletions(-)
drivers/media/video/cx88/Kconfig +14 -14
index e99dfbb..87d79df 100644
@@ -15,20 +15,6 @@ config VIDEO_CX88
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx8800
 
-config VIDEO_CX88_DVB
-	tristate "DVB/ATSC Support for cx2388x based TV cards"
-	depends on VIDEO_CX88 && DVB_CORE
-	select VIDEO_BUF_DVB
-	---help---
-	  This adds support for DVB/ATSC cards based on the
-	  Connexant 2388x chip.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx88-dvb.
-
-	  You must also select one or more DVB/ATSC demodulators.
-	  If you are unsure which you need, choose all of them.
-
 config VIDEO_CX88_ALSA
 	tristate "ALSA DMA audio support"
 	depends on VIDEO_CX88 && SND && EXPERIMENTAL
@@ -44,6 +30,20 @@ config VIDEO_CX88_ALSA
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx88-alsa.
 
+config VIDEO_CX88_DVB
+	tristate "DVB/ATSC Support for cx2388x based TV cards"
+	depends on VIDEO_CX88 && DVB_CORE
+	select VIDEO_BUF_DVB
+	---help---
+	  This adds support for DVB/ATSC cards based on the
+	  Connexant 2388x chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-dvb.
+
+	  You must also select one or more DVB/ATSC demodulators.
+	  If you are unsure which you need, choose all of them.
+
 config VIDEO_CX88_DVB_ALL_FRONTENDS
 	bool "Build all supported frontends for cx2388x based TV cards"
 	default y
#23 lore raw

PATCH 17/21 Kconfig: fix ATSC frontend menu item names by manufacturer

In reply to [email protected]

From: Michael Krufky <[email protected]>
Date: 1142525905 \-0300

- Corrected typo for NxtWave NXT200X
- Added "Oren" manufacturer name to menu items for OR51132 and OR51211
- Removed "(pcHDTV HDx000 card)" from Oren frontends menu item names, This isn't necessary, as these frontends are selected by the card drivers, build configuration (DVB_BT8XX and VIDEO_CX88_DVB).

---

 drivers/media/dvb/frontends/Kconfig |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/media/dvb/frontends/Kconfig +3 -3
index c676b1e..ff077eb 100644
@@ -155,7 +155,7 @@ comment "ATSC (North American/Korean Ter
 	depends on DVB_CORE
 
 config DVB_NXT200X
-	tristate "Nextwave NXT2002/NXT2004 based"
+	tristate "NxtWave Communications NXT2002/NXT2004 based"
 	depends on DVB_CORE
 	select FW_LOADER
 	help
@@ -169,14 +169,14 @@ config DVB_NXT200X
 	  or /lib/firmware (depending on configuration of firmware hotplug).
 
 config DVB_OR51211
-	tristate "or51211 based (pcHDTV HD2000 card)"
+	tristate "Oren OR51211 based"
 	depends on DVB_CORE
 	select FW_LOADER
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
 config DVB_OR51132
-	tristate "OR51132 based (pcHDTV HD3000 card)"
+	tristate "Oren OR51132 based"
 	depends on DVB_CORE
 	select FW_LOADER
 	help
#24 lore raw

PATCH 18/21 Fix a bug when more than MAXBOARDS were plugged on em28xx

In reply to [email protected]

From: Mauro Carvalho Chehab <[email protected]>
Date: 1142367897 \-0300

Coverity reported a bug at checking max number of supported boards by em28xx init code.

---

 drivers/media/video/em28xx/em28xx-video.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/em28xx/em28xx-video.c +1 -1
index 94a14a2..d58a12c 100644
@@ -1859,7 +1859,7 @@ static int em28xx_usb_probe(struct usb_i
 	model=id->driver_info;
 	nr=interface->minor;
 
-	if (nr>EM28XX_MAXBOARDS) {
+	if (nr >= EM28XX_MAXBOARDS) {
 		printk (DRIVER_NAME ": Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS);
 		return -ENOMEM;
 	}
#25 lore raw

PATCH 19/21 Cpia2: move Kconfig build logic into cpia2/Kconfig

In reply to [email protected]

From: Michael Krufky <[email protected]>
Date: 1142308340 \-0300

---

 drivers/media/video/Kconfig       |    2 ++
 drivers/media/video/cpia2/Kconfig |    9 +++++++++
 2 files changed, 11 insertions(+), 0 deletions(-)
drivers/media/video/Kconfig +2 -0
index 995f033..ee0eed4 100644
@@ -142,6 +142,8 @@ config VIDEO_CPIA_USB
 	  otherwise say N. This will not work with the Creative Webcam III.
 	  It is also available as a module (cpia_usb).
 
+source "drivers/media/video/cpia2/Kconfig"
+
 config VIDEO_SAA5246A
 	tristate "SAA5246A, SAA5281 Teletext processor"
 	depends on VIDEO_DEV && I2C
drivers/media/video/cpia2/Kconfig new file +9 -0
new file mode 100644
index 0000000..1c09ef9
@@ -0,0 +1,9 @@
+config VIDEO_CPIA2
+	tristate "CPiA2 Video For Linux"
+	depends on VIDEO_DEV
+	---help---
+	  This is the video4linux driver for cameras based on Vision's CPiA2
+	  (Colour Processor Interface ASIC), such as the Digital Blue QX5
+	  Microscope. If you have one of these cameras, say Y here
+
+	  This driver is also available as a module (cpia2).
#26 lore raw

PATCH 20/21 VIDEO_CPIA2 must depend on USB

In reply to [email protected]

From: Adrian Bunk <[email protected]>
Date: 1142524433 \-0300

CONFIG_VIDEO_CPIA2=y, CONFIG_USB=n results in the following compile
<-- snip -->
...
LD .tmp_vmlinux1
drivers/built-in.o: In function set_alternate':cpia2_usb.c:(.text+0x443aa2): undefined reference to usb_set_interface' drivers/built-in.o: In function cpia2_usb_stream_resume': undefined reference to usb_alloc_urb' drivers/built-in.o: In function cpia2_usb_stream_resume': undefined reference to usb_submit_urb' drivers/built-in.o: In function cpia2_usb_stream_pause': undefined reference to usb_kill_urb'
drivers/built-in.o: In function cpia2_usb_stream_pause': undefined reference to usb_free_urb'
drivers/built-in.o: In function cpia2_usb_disconnect':cpia2_usb.c:(.text+0x443e14): undefined reference to usb_driver_release_interface' drivers/built-in.o: In function cpia2_usb_transfer_cmd': undefined reference to usb_control_msg' drivers/built-in.o: In function cpia2_usb_transfer_cmd': undefined reference to usb_control_msg' drivers/built-in.o: In function cpia2_usb_complete':cpia2_usb.c:(.text+0x444836): undefined reference to usb_submit_urb' drivers/built-in.o: In function cpia2_usb_cleanup': undefined reference to usb_deregister'
drivers/built-in.o: In function cpia2_usb_init': undefined reference to usb_register_driver'

---

 drivers/media/video/cpia2/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/cpia2/Kconfig +1 -1
index 1c09ef9..513cc09 100644
@@ -1,6 +1,6 @@
 config VIDEO_CPIA2
 	tristate "CPiA2 Video For Linux"
-	depends on VIDEO_DEV
+	depends on VIDEO_DEV && USB
 	---help---
 	  This is the video4linux driver for cameras based on Vision's CPiA2
 	  (Colour Processor Interface ASIC), such as the Digital Blue QX5
#27 lore raw

PATCH 21/21 Fixed em28xx based system lockup

In reply to [email protected]

From: Markus Rechberger <[email protected]>
Date: Tue, 7 Feb 2006 08:49:13 +0000 (-0200)

Fixed em28xx based system lockup, device needs to be initialized before starting the isoc transfer otherwise the system will completly lock up.

---

 drivers/media/video/em28xx/em28xx-video.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/media/video/em28xx/em28xx-video.c +3 -0
index d58a12c..385d22a 100644
@@ -367,6 +367,9 @@ static int em28xx_v4l2_open(struct inode
 	em28xx_capture_start(dev, 1);
 	em28xx_resolution_set(dev);
 
+	/* device needs to be initialized before isoc transfer */
+	video_mux(dev, 0);
+
 	/* start the transfer */
 	errCode = em28xx_init_isoc(dev);
 	if (errCode)
#28 lore raw
In reply to [email protected]
Quoted 5 lines · On Fri, 17 Mar 2006, [email protected] wrote:

This patch series is also available under v4l-dvb.git tree at:
kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git

Linus, please pull these from master branch.

Not this close before 2.6.16.

I'll happily take individual patches that come with some explanation for why they are really critical at this point, but I don't want to do a pull of what seems to be at least partly just cleanups.

Linus

#29 lore raw

Em Sex, 2006-03-17 às 15:07 -0800, Linus Torvalds escreveu:

Quoted 6 lines · On Fri, 17 Mar 2006, [email protected] wrote:
Quoted 4 lines

This patch series is also available under v4l-dvb.git tree at:
kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git

Quoted 7 lines
Quoted 1 line

Linus, please pull these from master branch.

Not this close before 2.6.16.

I'll happily take individual patches that come with some explanation for why they are really critical at this point, but I don't want to do a pull of what seems to be at least partly just cleanups.

Ok, I'll send you via e-mail the critical ones.

Quoted 1 line

Linus

Cheers,
Mauro.