Skip to contentSkip to conversation

[Fwd: Re: skype]

Fwd: Re: skype John Woodrow 2 participants 2 messages Mar 21, 2006

lore
Share & tools
lore
#0 lore raw
Quoted 30 lines · Hal MacArgle
Quoted 14 lines · chuck gelm
Quoted 10 lines · John Woodrow

Hello,

I'm having problems with Skype, I installed the rpm for fc3 but I am using fc4. Many people claim to have got this working but I am having problems with the mic, people can not hear me. I've made sure the mic volume is turned right up in volume control but this makes no difference. Has anybody had the same experience who can help?

-

Hi, John:

Quoted 7 lines

I use SKYPE both with Windows and with Linux. The audio is tricker, for me, with Linux. Does your microphone audio work locally? I do not use FC? nor .rpm, so I can offer no help in those areas.

HTH, Chuck

Dunno about Skype or Fedora Core 3/4, but was wondering if
your problem could be the particular sound card you're using??

I've noticed that many not only require "Volume" and "Mic"
set high but a possible other "slider" that affects it too?? Does your mixer have an obscure additional slider??

Quoted 9 lines

I have one card that needs three set and unmuted to work
properly... Flail away... <grin>

Chuck asks if the Mic works OK locally.. Usually Mic inputs
are not stereo and one of the pin outs is +5 for an electronic mic.. I could be way wrong depending on the card, etc... Just a thought..

HTH.

Thankyou people,
How can I check if the mic works locally? I've got all the volume
controls turned up to max in gnome and have used the echo123 service but
with no luck. My soundcard is a Creative Labs SB Audigy. There is a
skype forum with instructions on there
( http://forum.skype.com/viewtopic.php?t=4489&sid=e246be97d68352110b84ca587836357b ) but to be honest not for lack of trying I'm nearly linux illiterate and can not understand what is going on. I know this is my fault so I am not expecting a babysitter.

I can not find modules.conf or modules.d/alsa that the guide speaks of.

Thank you all.

#1 lore raw

Hi, John:

I am guessing that your sound card is not configured properly.

If Fedora Core supports 'dmesg' :-|
Are there any error messages about sound/audio in the output of

dmesg | grep -i sound
dmesg | grep -i audio
?

Quoted 3 lines

Thankyou people,
How can I check if the mic works locally?

Place the microphone near the speaker. Do you hear a squeal?

Quoted 4 lines

I've got all the volume
controls turned up to max in gnome and have used the echo123 service but with no luck.

In my Gnome workstation I click on - Applications - Volume Control - Is the microphone level set to maximum?
Is the 'mute' button cleared?

Quoted 2 lines

My soundcard is a Creative Labs SB Audigy.

Do you know how to issue console commands as user 'root' ? Do you know how to save the result of console commands to a text file? Do you know how to paste this text into an email?

lsmod | grep snd
lsmod | grep snd > snd.txt

lspci -v | grep -A 5 audio
lspci -v | grep -A 5 audio > audio.txt

Quoted 7 lines

There is a
skype forum with instructions on there
( http://forum.skype.com/viewtopic.php?t=4489&sid=e246be97d68352110b84ca587836357b ) but to be honest not for lack of trying I'm nearly linux illiterate and can not understand what is going on. I know this is my fault so I am not expecting a babysitter.

I can not find modules.conf or modules.d/alsa that the guide speaks of.

Where did you look? How did you look? I find my 'modules.conf' in "/etc/". /etc/modules.conf

Perhaps Fedora Core does not use 'modules.conf'. :-|

HTH, Chuck

Quoted 4 lines

Thank you all.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs