UEAGLE : support geode
Subsystems (3)
matthieu castet
maintainerPATCH 2/4 UEAGLE : support geode
Hi,
this patch :
- increase ack timeout for slow system (geode 233MHz where HZ=100)
- reset the cmv ack flag when rebooting
Signed-off-by Matthieu CASTET <[email protected]>
ueagle-atm.c +8 -1
@@ -243,7 +243,7 @@#define BULK_TIMEOUT 300#define CTRL_TIMEOUT 1000 -#define ACK_TIMEOUT msecs_to_jiffies(1500) +#define ACK_TIMEOUT msecs_to_jiffies(3000)#define UEA_INTR_IFACE_NO 0#define UEA_US_IFACE_NO 1
@@ -1079,7 +1079,13 @@uea_enters (INS_TO_USBDEV (sc));uea_info (INS_TO_USBDEV (sc),"(re)booting started\n" ); +/* mask interrupt */ sc->booting =1 ; +/* We need to set this here because, a ack timeout could have occured, +* but before we start the reboot, the ack occurs and set this to 1. +* So we will failed to wait Ready CMV. +*/ + sc->cmv_ack =0 ;UPDATE_ATM_STAT (signal,ATM_PHY_SIG_LOST );/* reset statistics */
@@ -1105,6 +1111,7 @@msleep (1000 ); sc->cmv_function =MAKEFUNCTION (ADSLDIRECTIVE ,MODEMREADY ); +/* demask interrupt */ sc->booting =0 ;/* start loading DSP */
matthieu castet
maintainerQuoted 6 lines · matthieu castet
Hi,
this patch :
- increase ack timeout for slow system (geode 233MHz where HZ=100)
- reset the cmv ack flag when rebooting
add correct path for the file name
Signed-off-by Matthieu CASTET <[email protected]>
drivers/usb/atm/ueagle-atm.c +8 -1
@@ -243,7 +243,7 @@#define BULK_TIMEOUT 300#define CTRL_TIMEOUT 1000 -#define ACK_TIMEOUT msecs_to_jiffies(1500) +#define ACK_TIMEOUT msecs_to_jiffies(3000)#define UEA_INTR_IFACE_NO 0#define UEA_US_IFACE_NO 1
@@ -1079,7 +1079,13 @@uea_enters (INS_TO_USBDEV (sc));uea_info (INS_TO_USBDEV (sc),"(re)booting started\n" ); +/* mask interrupt */ sc->booting =1 ; +/* We need to set this here because, a ack timeout could have occured, +* but before we start the reboot, the ack occurs and set this to 1. +* So we will failed to wait Ready CMV. +*/ + sc->cmv_ack =0 ;UPDATE_ATM_STAT (signal,ATM_PHY_SIG_LOST );/* reset statistics */
@@ -1105,6 +1111,7 @@msleep (1000 ); sc->cmv_function =MAKEFUNCTION (ADSLDIRECTIVE ,MODEMREADY ); +/* demask interrupt */ sc->booting =0 ;/* start loading DSP */