hci_scodata_packet messages flooding syslog
Hi,
I am having problems with a BT USB dongle manufactured by Vivanco (Model
18031, FCC-ID NV6-CS8024, if that matters).
Everytime I connect the stick, the syslog is flooded with messages
Quoted 1 line
hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
There are about 500 messages generated EACH SECOND, causing a high load (and lots of wasted disk space) on my system. Is there anything I can do to get rid of them?
I believe the problem discussed in the thread below is about the same issue, but unfortunately there was no solution posted:
Output of hciconfig -a:
Quoted 16 lines
hci0: Type: USB
BD Address: 00:0C:78:30:EE:F2 ACL MTU: 339:4 SCO MTU: 60:9 UP RUNNING RX bytes:249022 acl:0 sco:73200 events:16 errors:0 TX bytes:310 acl:0 sco:0 commands:14 errors:0 Features: 0xff 0xff 0x81 0x00 0x18 0x18 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'null-0' Class: 0xb3010c Service Classes: Positioning, Networking Device Class: Computer, Laptop HCI Ver: 1.2 (0x2) HCI Rev: 0x222 LMP Ver: 1.2 (0x2) LMP Subver:
Quoted 1 line
0x222Manufacturer: RTX Telecom A/S (21)
Any help would be appreciated.
regards,
chris
p.s. kernel is 2.6.15 (Kubuntu Dapper).
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel