Skip to contentSkip to conversation

Creating a new partition /dev/hda5

linux-lvm [email protected] 2 participants 2 messages Apr 13, 2006 – Apr 18, 2006

lore
Share & tools
lore
#0 lore raw

I have Fedora Core4 installed on my machine and trying to make mythtv work for me. I understand I need to create a new partition /dev/hda5 and mount /video file system. I've done some reading on LVM and come up with following commands to install the new partition on my machine. I need to have them verified by experts as I don't want to risk losing any data on my hard.

#pvcreate /dev/hda5
#vgcreate VolGroup00 /dev/hda5
#lvcreate -L50G -name video VolGroup00
#mount /dev/hda5/video
#mount -0 remount,resize /video

Below is the information on my machine:

[root@localhost mytv]# /sbin/lvm.static vgscan
Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2
[root@localhost mytv]# /sbin/lvm.static vgdisplay
--- Volume group ---
VG Name VolGroup00
System ID

  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  3
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               111.69 GB
  PE Size               32.00 MB
  Total PE              3574
  Alloc PE / Size       3573 / 111.66 GB
  Free  PE / Size       1 / 32.00 MB
  VG UUID               xdWgpi-74QQ-jgfK-EAzc-ojid-Geuo-HsyGA4

[root@localhost mytv]# /sbin/fdisk -l

Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1          13      104391   83  Linux
/dev/hda2              14       14593   117113850   8e  Linux LVM

Please let me know if the above commands are correct or not.

Thanks,

Bita

#1 lore raw
Quoted 7 lines · [email protected] wrote:

I have Fedora Core4 installed on my machine and trying to make mythtv work for me. I understand I need to create a new partition /dev/hda5 and mount /video file system. I've done some reading on LVM and come up with following commands to install the new partition on my machine. I need to have them verified by experts as I don't want to risk losing any data on my hard.

Quoted 5 lines

#pvcreate /dev/hda5
#vgcreate VolGroup00 /dev/hda5
#lvcreate -L50G -name video VolGroup00
#mount /dev/hda5/video
#mount -0 remount,resize /video

Seems your understanding of logical volumes and partitions is a bit confused. First you have a physical disk (/dev/hda). Your "fdisk -l" shows me, that you have divided (partitioned) your disk into two partitions hda1 and hda2, where hda2 contains your LVM data.

So, you won't think about any additional partitions, because there is no space left next to hda1 and hda2. But you want to distribute the disk space within your volume group (named VolGroup00, located within hda2). This has nothing to do with "partitions" any more. Instead you create a "logical volume" (lv) named "video", which is a part of your volume group. Thus its device path becomes "/dev/VolGroup00/video". Before you can mount it, you have to "format" this volume (see mkfs).

However, your "vgdisplay" shows me, that you already used all space of your volume grop (Free PE / Size 1 / 32.00 MB), too. So it seems you already performed some "vgcreate" and "lvcreate". Can you please do a "lvdisplay" or "lvs" to show us the current content of your VolGroup00.

What do you intend using "-O remount,resize"?

Dieter.

Signature · 4 lines
Dieter St�ken, con terra GmbH, M�nster
    [email protected]
    http://www.conterra.de/
    (0)251-7474-501