Skip to contentSkip to conversation

arm64: dts: mt7622: fix BPI-R64 WPS button

PATCH Applied Nick Hainke 2 participants 2 messages Jun 30, 2022 – Jul 7, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: mt7622: fix BPI-R64 WPS button

The bananapi R64 (BPI-R64) experiences wrong WPS button signals. In OpenWrt pushing the WPS button while powering on the device will set it to recovery mode. Currently, this also happens without any user interaction. In particular, the wrong signals appear while booting the device or restarting it, e.g. after doing a system upgrade. If the device is in recovery mode the user needs to manually power cycle or restart it.

The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in the device tree. This setting seems to suppress the unwanted WPS button press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW.

The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt

Fixes 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +1 -1
index 2b9bf8dd14ec..7538918c7a82 100644
@@ -49,7 +49,7 @@ factory {
 		wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
 		};
 	};
 
Signature · 1 line
2.37.0
maintainer Applied
#1 lore raw
Quoted 13 lines · Nick Hainke

The bananapi R64 (BPI-R64) experiences wrong WPS button signals. In OpenWrt pushing the WPS button while powering on the device will set it to recovery mode. Currently, this also happens without any user interaction. In particular, the wrong signals appear while booting the device or restarting it, e.g. after doing a system upgrade. If the device is in recovery mode the user needs to manually power cycle or restart it.

The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in the device tree. This setting seems to suppress the unwanted WPS button press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW.

Quoted 7 lines

The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt

Fixes 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")

Applied, thanks!

Quoted 17 lines
---
  arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +1 -1
index 2b9bf8dd14ec..7538918c7a82 100644
@@ -49,7 +49,7 @@ factory {
  		wps {
  			label = "wps";
  			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
  		};
  	};