Image date output from imls/iminfo when no rtc chip is present
Creation date of the U-Boot Image is suppressed from output of imls/iminfo commands if CFG_CMD_DATE is not included in CONFIG_COMMANDS.
However, CFG_CMD_DATE cannot be included unless you have an RTC chip on board.
I think the date of U-Boot image is useful information that we would like to see even if CFG_CMD_DATE is not defined.
To such end, I thought of the following solution:
Define CONFIG_RTC_NONE so that CFG_CMD_DATE could be defined. Obviously, date/time commands will display error message when user attempts to use these commands with CONFIG_RTC_NONE. I might even exclude the definition of date/time commands altogether keeping only supporting date functionality needed for imls/iminfo.
What do you think? If there is agreement on CONFIG_RTC_NONE, I can submit a patch...
Best regards,
Tolunay
Quoted 2 lines · In message <[email protected]> you wrote:
Creation date of the U-Boot Image is suppressed from output of imls/iminfo commands if
CFG_CMD_DATEis not included inCONFIG_COMMANDS.
No. That's only half of the story.
Quoted 2 lines
However,
CFG_CMD_DATEcannot be included unless you have an RTC chip on board.
Which seems logical to me, as "date" is the command to read and set the RTC.
Quoted 2 lines
I think the date of U-Boot image is useful information that we would like to see even if
CFG_CMD_DATEis not defined.
Indeed.
Quoted 1 line
To such end, I thought of the following solution:
Don't re-invent the wheel, whit unnecessary complexity.
Quoted 2 lines
What do you think? If there is agreement on
CONFIG_RTC_NONE, I can submit a patch...
I disagree. Just RTFM...
Quoting the README:
- Timestamp Support:
When CONFIG_TIMESTAMP is selected, the timestamp (date and time) of an image is printed by image commands like bootm or iminfo. This option is automatically enabled when you select CFG_CMD_DATE .
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The use of COBOL cripples the mind; its teaching should, therefore, be regarded as a criminal offense. - E. W. Dijkstra
Quoted 6 lines · Wolfgang Denk
Quoted 3 lines
What do you think? If there is agreement on
CONFIG_RTC_NONE, I can submit a patch...I disagree. Just RTFM...
Quoted 8 lines
Quoting the README:
- Timestamp Support:
When
CONFIG_TIMESTAMPis selected, the timestamp (date and time) of an image is printed by image commands like bootm or iminfo. This option is automatically enabled when you selectCFG_CMD_DATE.
When I read this I kind of got the impression CFG_CMD_DATE was needed. Sorry for the noise on this issue.
Tolunay